! Vehicles with a rain sensor: if the wind-
shield becomes dirty in dry weather condi-
tions, the windshield wipers may be activa-
ted inadvertently. This could then damage
the windshield wiper blades or scratch the
windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.
Vehicles with a rain sensor: in the Ä or
Å position, the appropriate wiping fre-
quency is automatically set according to the
intensity of the rain. In the Å position, the
rain sensor is more sensitive than in the Ä
position, causing the windshield wipers to
wipe more frequently.
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions.
Replacing the wiper blades
Important safety notes
G
WARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could
be trapped by the wiper arm. There is a risk of
injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
! To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
! Never open the hood if a windshield wiper
arm has been folded away from the wind-
shield.
Never fold a windshield wiper arm without a
wiper blade back onto the windshield.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the windshield wiper arm without a wiper
blade and it falls onto the windshield, the
Windshield wipers
windshield may be damaged by the force of
the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
Changing the windshield wiper blades
Removing the wiper blades
Remove the SmartKey from the ignition
X
lock.
Fold the wiper arm away from the wind-
X
shield.
Press both release clips ;.
X
Fold wiper blade : in the direction of
X
arrow = away from wiper arm ?.
Remove wiper blade : in the direction of
X
arrow A.
Installing the wiper blades
119
Z
Need help?
Do you have a question about the CLA and is the answer not in the manual?
Questions and answers
2016 cla 250 amg 4matic where to find towing weight plate on jap inpoert
The vehicle identification plate, which provides information about weights, including the gross vehicle weight rating, is located on the B-pillar on the driver's side. You can find the valid maximum permissible gross vehicle weight rating for your vehicle on the Tire and Loading Information placard.
This answer is automatically generated