Table of Contents
Advertisement
Max. loading exceeded.
Covered ventilation grill.
Residue inside the drum.
To little free space around the appliance
Loading door
Filters not locked in place.
does not close
Programme in-
Full water reservoir.
active
Drying cycle to
Small laundry volume./Too dry laundry for
short
selected programme.
Fluff filters clogged.
To high loading volume.
Drying cycle to
Laundry insufficiently spun.
4)
long
Particularly high room temperature - no ma-
chine fault.
1) Switch the dryer off. Set programme/time. Press the START PAUSE button.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaningchapter
4) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).
Technical data
Dimensions (mm)
Max. depth
(with the appliance door open)
Max. width
(with the appliance door open)
Electrical connection
Drum volume
Weight of the appliance
Laundry: max. weight
Type of use
Ambient temperature
1)
Energy consumption
Annual energy consumption
Energy efficiency class
12
Width / Height / Depth
Voltage
Frequency
Fuse
Total power
Min.
Max.
kWh/cycle
2)
Respect max. loading volume.
Uncover ventilation grill in base area.
Clean the drum inside.
Ensure min. 5cm free space around the ap-
pliance
Install fine filter and/or snap course filter in-
to place.
3)
Empty water reservoir
PAUSE button.
Select time programme or higher drying lev-
el (e.g. EXTRA DRY ).
Clean fluff filters.
Respect max. loading volume.
Spun adequately the laundry.
Lower the room temperature if possible.
85 x 60 x 58 cm
1090 mm
950 mm
230-240 V
50 Hz
13 A
2350 W
108 l
37 kg
7 kg
Household
5 °C
35 °C
4,70 kWh
552 kWh
C
, press START
www.zanussi.com
Hide quick links:
Advertisement
Table of Contents
