Product View And Functions; The Basics; Bluetooth - Eventide H9 User Manual

H9 User Guide

The Basics

The Basics
There are a few basic concepts that you'll have to grasp to use the H9 successfully. If you read
nothing else, please read this section.

Bluetooth

H9's Bluetooth function allows you to wirelessly control your H9 from an iOS device or a
Windows or Mac computer. Of course, while Bluetooth connectivity is secure by design and
only the registered owner of an H9 may connect to it with H9 Control, if you're playing in
front of an audience full of iPhones owners and you have not registered your H9, you may
want to completely disable Bluetooth. It's easily done. Just reach down and simultaneously
press the X, Y, and Z buttons. Bluetooth turns off. Press the three keys again to turn Blue
tooth back on.
You must first pair your H9 with an iOS device to use H9 Control, a feature-rich remote
control app. On your iOS device go to the Bluetooth menu in Settings and turn Bluetooth on
and enable "Discovery". Your H9's name, H9-xxxx, should be listed (xxxx=last 4 digits of your
H9's serial number). The 4 digit PIN for Bluetooth pairing is the same as the last four digits of
your H9's serial number. When paired (see System Mode/Blue later in this User Guide), the
Bluetooth Paired LED will light. The Bluetooth ON LED flashes to indicate active
communications between your H9 and iOS device.
TIP: You can change your H9's Bluetooth Name & PIN. See System Mode.
6