Changing The Water Filter - Melitta CAFFEO CI Operating Instructions Manual

• Carefully screw the Melitta
base of the water tank using the screw-in aid at the bottom end of the
coffee scoop provided.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
• Press the rotary switch.
• Place a vessel with an approximate capacity of 0.5 l under the outlet
and press the rotary switch to confirm.
→ The appliance rinses and then returns to standby mode.
The water hardness is automatically set to Soft.

10.2 Changing the water filter

Change the water filter when a prompt to do so appears on the graphic display.
Care
Descaling
Filter
Exit
Filter
Exit
Insert filter
Change filter
• Unscrew the water filter from the thread on the base of the water filter.
• Carefully screw the new Melitta
the base of the water tank using the screw-in aid at the bottom end of
the coffee scoop provided.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
• Press the rotary switch.
• Place a vessel with an approximate capacity of 0.5 l under the outlet
and press the rotary switch to confirm.
→ The appliance rinses and then returns to standby mode.
Claris water filter into the thread on the
® ®
• Select the Care sub-menu.
• Turn the rotary switch until Filter is highlighted
and press it to confirm the selection.
• Turn the rotary switch until Change filter is
highlighted and press it to confirm the selection.
• Turn the rotary switch until Start is highlighted
and press it to confirm the selection.
• Lift the lid of the water tank (Fig. A, No. 6) and
pull the water tank up and out of the appliance.
Claris
®
water filter into the thread on
®
39