Connecting Peripheral Equipment - Sharp PN-C703B Operation Manual

Connecting Peripheral Equipment

Caution
• Be sure to turn off the power and disconnect the plug from
the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and the other problems.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
TIPS
• When using the touch panel, connect the USB cable to the
computer.
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• Use the automatic screen adjustment when a computer
screen is displayed for the first time using PC (INPUT6), or
when the setting of the computer is changed. The screen is
adjusted automatically using AUTO SYNC. in SCREEN of
the OTHERS menu.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor's audio input, and
connecting the monitor's audio output to the speakers or
other devices.
10
11
12
9
1. HDMI1 input terminal (INPUT1)
2. HDMI2 input terminal (INPUT2)
3. HDMI3 input terminal (INPUT3)
• Use a commercially available HDMI cable (conforming to
the HDMI standard).
• To input only video by HDMI and input audio by
analog, connect to the HDMI2 input terminal and select
HDMI+ANALOG in AUDIO SELECT of the OTHERS
menu. When HDMI is selected, connection to the audio
input terminal is unnecessary.
4. D-sub input terminal (INPUT6)
5. Audio input terminal (for INPUT2/INPUT6)
• Use an audio cable without resistance.
6. AV component input terminals (INPUT4)
• This can be used as an AV video input terminal.
Connect to the [VIDEO] input terminal, and change INPUT
SELECT to VIDEO of the OTHERS menu.
7. AV video input terminal (INPUT5)
8. Audio input terminal (for INPUT5)
9. USB cable
• To use the touch panel, the monitor must be connected to
a computer using the USB cable.
10. RS-232C input terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 cross cable
between this terminal and the computer.
11. Audio input terminal (for INPUT4)
12. Audio output terminal
• The output sound varies depending on the input mode.
3
2
1
4
5
6
7
8
13
E