Asterisk Cli - OpenVox DGW-100XR User Manual

Call
Log
Verbose
Command
Agent
User
Config
DTMF
Reporting
Dialplan
Originate
All
Once you set like the above figure, the host 172.16.100.110/255.255.0.0 is allowed to access the
gateway API. Please refer to the following figure to access the gateway API by putty.
172.16.100.110 is the gateway's IP, and 5038 is its API port.

Asterisk CLI

In this page, you are allowed to run Asterisk commands.
OpenVox Communication Co.Ltd
Information about channels and ability to set information in
a running channel.
Logging information. Read-only. (Defined but not yet used.)
Verbose information. Read-only. (Defined but not yet used.)
Permission to run CLI commands. Write-only.
Information about queues and agents and ability to add
queue members to a queue.
Permission to send and receive UserEvent.
Ability to read and write configuration files.
Receive DTMF events. Read-only.
Ability to get information about the system.
Receive NewExten and Var Set events. Read-only.
Permission to originate new calls. Write-only.
Select all or deselect all.
Figure 7-1-2 Putty Access
Figure 7-2-1 Asterisk Command Interface
DGW-100XR User Manual
51