Kenwood KDC-MP628 Service Manual page 18

KDC-MP628/MP7028/MP728
MP8029/W7031/W7031Y
● FM/AM channel space switching
(KDC-MP628/MP7028/MP728/MP8029)
From the Power OFF condition, while pressing [1] and [5] keys
down simultaneously, press the [SRC] key and turn power ON.
● Security
• Forced Power ON mode
While "– – – –" is being displayed, by resetting while pressing
[ ] (NEXT) key and [4] key simultaneously, it is possible to
turn the power ON for 30 minutes only.
● Method of clearing the programmable security
code (KDC-MP628/MP7028/MP728)
1. While "– – – –" is being displayed, press [
least 3 seconds while pressing [AUTO] key.
This makes "– – – –" display disappear.
2. Using the remote controller, input "KCAR".
Press remote controller [5] key 2 times (Input for "K") and
then press [ ] key.
Press remote controller [2] key 3 times (Input for "C") and
then press [ ] key.
Press remote controller [2] key once (Input for "A") and then
press [ ] key.
Press remote controller [7] key 2 times (Input for "R") and
then press [ ] key.
3. The security is released and the unit enters the STANDBY
mode.
4. If a wrong code is input, the unit goes into the Code Re-
quest mode.
18
TEST MODE
• How to register the security code on the "Car Au-
dio Passport" after replacement of the E2PROM
(KDC-MP8029/W7031/W7031Y)
1. Enter the test mode. (Refer to the section on "How to Enter
the Test Mode.")
2. Enter the MENU by long pressing [
second.
While "Security" is being displayed, press [
least 1 second and enter the security registration mode.
3. Using [FM] / [AM] / [
[FM] key : Number up / [AM] key : Number down
[ ] key : Cursor Right / [
4. Press [
TER". Then, re-enter the code using the method in above
] key for at
No. "3".
5. Press [
PROVED".
6. Release the test mode. (Refer to the section on "How to
Release the Test Mode.")
Note : The security code for this model cannot be deleted by
"all clear" command.
] (NEXT) key for one
] / [ ] keys, enter the code.
] key : Cursor Left
] key for at least 3 seconds to display "RE-EN-
] key for at least 3 seconds to display "AP-
] key for at