Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for N-Com Bluetooth Kit3 PLUS
Summary of Contents for N-Com Bluetooth Kit3 PLUS
- Page 1 Firmware Version: 4.0x USER INSTRUCTIONS AND SAFETY...
- Page 2 Firmware version, visit the website www.n-com.it REFERENCE STANDARDS The products of the N-Com line are in compliance with standards as per the table below: Bluetooth The Bluetooth system complies with the main safety requirements...
-
Page 3: Table Of Contents
Contents WARNINGS AND SAFETY ____ 4 12. N-COM INTERCOM VIA CABLE 21 1.1.Road safety _________________ 4 13. N-COM BIKE-TO-BIKE 1.2.Switching on the system in safe INTERCOM ______________ 22 environments ____________________ 5 13.1. Bike-to-Bike pair up ______22 1.3.Interferences ________________ 5 13.2. -
Page 4: Warnings And Safety
1. WARNINGS AND SAFETY Read this User Manual carefully, as well as the User Manuals for other N-Com kits that you will be using with the N-Com Bluetooth Kit3 PLUS. Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. -
Page 5: Switching On The System In Safe Environments
When using the N-Com system, comply with all limitations and instructions related to the use of cell phones. Do not turn on your cell phone or the N-Com system whenever their use is forbidden or when the devices can cause interference or dangerous situations. -
Page 6: Qualified Personnel
Carry out all operations on the electronic equipment and on the N-Com system with the vehicle stopped, in compliance with Traffic Regulations. Caution: Bluetooth Kit3 PLUS allows radio reception. Any radio licence fees are to the user’s charge. 1.5. -
Page 7: Disposal
1.7. Disposal Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following instructions: The presence of a crossed-out wheelie bin indicates that in the ... -
Page 8: Content Of The Packaging
2. CONTENT OF THE PACKAGING The N-Com Bluetooth Kit3 PLUS package contains: e-box Bluetooth Kit3 PLUS PC connection cable Multimedia Wire2 Rechargeable battery Battery charger... -
Page 9: Installation
3. INSTALLATION Bluetooth Kit3 PLUS can be installed on all Nolan helmets pre-set for the N-Com system. In order to use the N-Com Bluetooth Kit3 PLUS system, the Nolan helmet must be equipped with the Basic Kit2 (or Basic Kit), sold separately. -
Page 10: Basic Functions
The switch from one function to the next is confirmed by a vocal message that indicates the system status. When Bluetooth Kit3 PLUS is turned on, the menu is always in the “BASE” mode. Depending on the menu position, you can manage the various audio devices and the... -
Page 11: N-Com Wizard
The programme can be downloaded from the Internet site www.n-com.it, in the “Download” section. In order to use it, a helmet equipped with Bluetooth Kit3 PLUS must be connected to the PC, using the USB cable supplied with the system. -
Page 12: N-Com App
Android application used to configure and control the N-Com system directly from a Smartphone. With the N-Com App, you can carry out most of the functions included in the N-Com Wizard program or, alternatively, it can be used as a wireless Bluetooth keypad. -
Page 13: Pairing Up Bluetooth Devices
Select the N-Com device. If a password is requested, enter 0000 (four zeros); Bluetooth Kit3 PLUS will confirm the pairing up by means of a tone in the headset, and the LEDs will stop flashing; Turn off and on both the mobile phone and the Bluetooth Kit3 PLUS to store the pairing up data. -
Page 14: Affiliation Reset Function
Press “” and “” at the same time for 4 seconds, and release them when you hear a beep. The N-Com will emit a special acoustic signal to confirm and will then turn itself off. This function can also be turned on through PC using the “N-Com Wizard”... -
Page 15: Mobile Phone Functions
4 seconds Conference call function Bluetooth Kit3 PLUS allows a conference call with Rider and Pillion Passenger. When a call comes in on a mobile phone connected via Bluetooth to Bluetooth Kit3 PLUS, the Rider-Pillion Passenger intercom is temporarily turned off. However, if you wish to share the phone call with the other helmet, simply turn on the intercom manually during the phone call (by briefly pressing “on”). -
Page 16: Gps Satellite Navigator 17.2. Functions
7. GPS SATELLITE NAVIGATOR FUNCTIONS Bluetooth Kit3 PLUS is compatible with the most common satellite navigators for motorcycles. By connecting the N-Com system to the GPS, all instructions will be transferred to the helmet. Every time the navigator communicates instructions, the intercom via Bluetooth with the Pillion Passenger is cut off and automatically restored at the end of the communication. -
Page 17: Stereo Fm Radio
8. STEREO FM RADIO Bluetooth Kit3 PLUS is equipped with Stereo FM radio with RDS (Radio Data System) technology, which automatically selects the strongest signal available for the FM radio you want to listen to, regardless of your location. You can scroll through the band of frequencies using the automatic search function, pre-set up to 6 favourite radio stations and change stations among the pre-set ones. -
Page 18: Bluetooth A2Dp Music Player
9. BLUETOOTH A2DP MUSIC PLAYER You can listen to high quality music by connecting Bluetooth Kit3 PLUS to a device equipped with Bluetooth A2DP (Advanced Audio Distribution Profile) protocol. The Bluetooth Kit3 PLUS system is also equipped with Bluetooth AVRCP (Audio Video Remote Control Profile) protocol, which allows you to stop and resume music reproduction directly from the helmet (with devices equipped with AVRCP). -
Page 19: Audio Devices With Cable Connection
MP3 players, i-Pods, Satellite navigators, GMRS and PMR radio and audio systems pre-fitted on motorcycles (MCS). To find out about all the available cables, please visit the website www.n-com.it in the “Cable connection compatibility” section. -
Page 20: N-Com Rider-Passenger Intercom Mode
11. N-COM RIDER-PASSENGER INTERCOM MODE In order to use Bluetooth Kit3 PLUS in wireless intercom mode, both helmets have to be equipped with a Bluetooth kit. In order for two Bluetooth Kits to communicate with one another, they have to be paired up first. -
Page 21: N-Com Intercom Via Cable
12. N-COM INTERCOM VIA CABLE In order to use N-Com Bluetooth Kit3 PLUS as intercom via cable, you need to use an Intercom Wire (sold separately) to connect the two helmets. Install the Basic Kit2 + Bluetooth Kit3 PLUS in the Rider's helmet. -
Page 22: N-Com Bike-To-Bike Intercom
N.B.: The range of the communication varies depending on the N-Com systems used. The Bluetooth Kit3 PLUS system stores up to 4 different Bluetooth Kit3 PLUS systems, so that “calls” can be made to these devices. -
Page 23: Making A Bike-To-Bike Call
You can display the memory settings of your device (and check the names of the paired up devices) using the “N-Com Wizard” programme for PC. To make it easier to recognize the N-Com systems paired up in “Bike-to- Bike” mode, you can rename them using the “N-Com Wizard”. - Page 24 The search for automatic reconnection lasts 2 minutes, at the end of which reconnection must be carried out through the “Bike- to-Bike Call”. For additional information, please visit the website www.n-com.it...
-
Page 25: Universal Intercom
14.1. Pairing up the UNIVERSAL INTERCOM To pair up an N-Com system and an intercom of another brand (from now on called Intercom B), the following procedure needs to be carried out: Put the N-Com system in the “Pair up Mode” by pressing the “on” key for ... -
Page 26: Function
The N-Com systems keeps an active connection to a mobile phone or to a GPS even during Bluetooth communication with other intercom systems. It may be that the intercom system hooked up to the N-Com does not allow for simultaneous connection to a mobile phone. -
Page 27: Battery
15. BATTERY Before using the N-Com device for the first time, recharge the battery completely for at least 10 hours. To obtain best performances from the battery, it is recommended to completely recharge the battery the first few times. Afterwards, you can recharge the battery for shorter periods. -
Page 28: Summary Table Of Controls
16. SUMMARY TABLE OF CONTROLS Button Pressure Brief Long Brief Long Brief Long Brief Long Turning on (2s) Turning off (4s) Increase Volume Decrease Volume Scroll menu (Base, Radio, Bike to Bike) (2s) Answer phone call Voice call... - Page 29 (2s) Disconnect A2PD device (2s) Play music (Play) (2s) Pause Function (Pause) (2s) Next track (Forward) (4s) Activate N-Com intercom or Universal Intercom Deactivate N-Com intercom or Universal Intercom Automatic search for new station (2s) Change station (pre-set stations) (2s)
- Page 30 Bike 1 pair up (2s) Bike 2 pair up (2s) Bike 3 pair up (4s) Bike 4 pair up (4s) Bike-to-Bike menu enabling/disabling Erase pair ups** (4s) *Briefly press at the same time. **With N-Com system in Pairing up Mode.
-
Page 31: Limited Warranty
Negligence and normal wear of internal and external parts. Any damage caused by an accident; Any change or modification made to the helmet or to the N-com system by the user or by third parties. Color changes or damages caused by exposure to harmful chemical products. -
Page 32: Validity Of This Limited Warranty
Nolangroup. Tampering with the internal electronic card or with other parts of the N-Com system shall invalidate the warranty. Moreover, the defects covered by this warranty do not include all those specific and subjective situations that may come up during the active use of the helmet such as, for example, comfort problems while riding or aerodynamic noises. -
Page 33: Procedure For The Forwarding Of Claims
Name and stamp of the authorized dealer. Product purchase date. Buyer’s name and address. Nolangroup reserves itself the right to not carry out repairs under warranty if the aforementioned information is removed or modified after the original purchase of the product from the dealer. -
Page 34: Product Identification
Legislative Decree 2 February 2002 n. 24. 17.5. Product identification N-Com products are identified by means of a code that allows product traceability and identification. The identification code is found underneath the bar code printed on the product packaging. -
Page 35: Warranty Registration Form
18. WARRANTY REGISTRATION FORM Product name: Bluetooth Kit3 PLUS Identification code Buyer’s Information Name Last name Address Phone e-mail Dealer’s stamp Date of purchase... - Page 36 Bluetooth Kit3 PLUS - 25/07/2013 13:50:00 Printed on recycled paper...
Need help?
Do you have a question about the Bluetooth Kit3 PLUS and is the answer not in the manual?
Questions and answers