Page 1 OPERATING GUIDE...
Page 2: Table Of Contents
Contents >>> CONTENTS Operating instructions Adjusting the unit holder’s position Contents 24-month warranty Registration Attaching the Navigation device Repairs Removing the Navigation device Warranty Emissions and disposal Devices with magnetic holders Safety instructions Switching the Navigation device on/ Overview of the scope of Delivery The Navigation device off (model dependent) Overview of the navigation device...
Page 3 CONTENTS >>> Transferring pictures route guidance Selecting Info box data fields Entering address by speech (selected 3D city view Faults models) The Route overview button Navigation Mode Speech Dialogue System (selected The Guidance info button What is navigation? models) The Route options button Selecting Navigation Explanation of symbols Selecting the vehicle profile...
Page 4 >>> CONTENTS Traffic announcements using TMC SituationScan Calling up the telephone mode (only (depending on the model) The detour assistant selected models) Live Traffic - Traffic The Park Assistant Telephone menu (only selected Announcements via Data The departure assistant models) Connection (model dependent) Map display options Dialing a number...
Page 5 CONTENTS >>> Design by day Tools Design by night Travel Guide (model dependent) Setting the colour Rear View camera Language Displaying Rear view camera Keyboard layout (depending on the model) Sounds Image viewer* Rear view camera (depending on the The image viewer menu model) Selecting an image Screen animations...
Page 6: 24-Month Warranty
24-month warranty (battery: 6 months) thorised by the manufacturer or by the for BECKER units, beginning on the day manufacturer himself. of delivery to the final customer (buyer). This warranty does not affect or...
Page 7: Safety Instructions
• Navigation devices from Becker could contain magnets. Do not bring them near magnetic data carriers (notebooks) or cards (EC cards, credit cards etc.). These could get damaged or be rendered unusable if brought into contact. Magnets can impair the function of cardiac pacemakers! Persons with cardiac pacemakers should not carry the device to close to their bodies.
Page 8 • Only use original BECKER accessories. This way it is ensured that all relevant provisions will be met and that health risks and damages to the product are avoided. Dispose of the used product or the battery according to the legal regulations in effect.
Page 9: The Navigation Device
The Navigation device This operating manual contains the This product is a high performance PND The use of the GPS = Global Positioning description of your Becker navigation (Personal Navigation Device) for use in system eliminates the tedious process equipment.
Page 10: Telephone (Selected Models)
>>> THE NAVIGATION DEVICE Unpacking the Navigation device Telephone (selected models) Your Navigation device is equipped with Bluetooth® wireless technology. Via Note: Bluetooth®, you may connect to a cell Your Navigation device is delivered in a phone equipped with Bluetooth® stable packaging.
Page 11: Overview Of Functions
 : optional              Becker Speech Dialogue System    Becker OneShot speech control          Speed camera warning ...
Page 12 >>> THE NAVIGATION DEVICE  : standard Navigation system - : not available  : optional     Becker Speech Dialogue System   Becker OneShot speech control   Speed camera warning     Driver warnings ...
Page 13: Scope Of Delivery
THE NAVIGATION DEVICE >>> Description of the device Scope of delivery Complaints In case of complaints, please consult The navigation device consists of the your dealer. The equipment may be sent basic unit and the accessories included in directly to United Navigation in its the scope of delivery.
Page 14: The Basic Unit
>>> THE NAVIGATION DEVICE The basic unit Cable for power supply from cigarette USB connection cable lighter The basic unit consists of the complete With the USB connection cable provided, electronic unit: it is possible to connect the Navigation This cable allows the unit to be connect- device to a standard PC with a USB •...
Page 15: Cable For Vehicle Integration
THE NAVIGATION DEVICE >>> The power supply must satisfy the Information about the Registration following requirements: documentation You can register your product using our • Alternating current 100-240 volts software service. We will then inform 50-60 Hertz you of any new updates and other news. Quick Start Guide Cable for vehicle integration The Quick Start Guide is designed to...
Page 16: Overview Of The Scope Of Delivery
>>> OVERVIEW OF THE SCOPE OF DELIVERY Scope of delivery Overview of the scope of Delivery 1 Basic device – PND (Personal Navigation Device) 2 USB connection cable 3 Unit holder with carrier plate (the design depending on the model) 4 Cable for power supply via the vehicle cigarette lighter (12/24 Volt) with integrated TMC-antenna (depending on the model)
Page 17: Overview Of The Navigation Device
OVERVIEW OF THE NAVIGATION DEVICE >>> 4 Microphone (depending on the model, sometimes in the Front of unit with controls and displays Overview of the navigation device right top corner, too)) 1 Back button Model dependent: either on the left bottom side of the screen or in the left top corner of the housing.
Page 18 >>> OVERVIEW OF THE NAVIGATION DEVICE (model dependent) Model dependent, the arrangement of the connections can differ on the bottom side of the device. Underside of the unit Top of the unit 2 Slot for Micro SD card 1 ON/OFF switch 3 Mini USB connection / connection for power supply 4 Connection for reversing camera 5 Connection for vehicle integration...
Page 19: Maintenance And Care
GENERAL OPERATION >>> Maintenance and care Your mobile navigation system was • Do not store your mobile navigation General operation designed and manufactured with great system in cold environments. During The unit is maintenance-free. care and should be treated with equal operation, when the unit warms up to For proper care, a commercially care.
Page 20: Battery Quality Declaration
>>> GENERAL OPERATION Battery quality declaration Display quality declaration Power supply The capacity of the rechargeable battery In some cases, for technical reasons, a Note: in your mobile navigation system few discoloured dots (pixels) may be You can charge the Navigation device decreases with every...
Page 21: Connection For The Cigarette Lighter
GENERAL OPERATION >>> Using the battery Connection for the cigarette lighter The internal power supply is via the Note: integrated rechargeable battery. The If the cigarette lighter has recently been rechargeable battery is maintenance- used and is still hot, wait until the lighter free and does not require any particular socket has cooled down.
Page 22: Connection To The Mains Outlet
>>> GENERAL OPERATION TMC antenna (depending on the GPS antenna Connection to the mains outlet model) ¤ Danger! Unit antenna The supplied TMC antenna is integrated Make sure that your hands are not wet The GPS antenna is integrated into the into the cable for power supply.
Page 23: Cable For Vehicle Integration
GENERAL OPERATION >>> Cable for vehicle integration Memory card Note: (depending on model, optional) Once the cable is connected, the Your Navigation device has a slot for a loudspeaker of the basic device is micro SD memory card. With a 4-pin 3.5mm jack cable you can switched off.
Page 24: Inserting And Ejecting The Memory Card
>>> GENERAL OPERATION Unit bracket Inserting the memory card > Remove the memory card from its The Navigation device can be attached packaging without touching or soiling directly to the windscreen with the unit the contact bar. holder. > Hold the memory card so that the contact strip is facing towards the rear Note: of the unit.
Page 25: On The Windscreen
GENERAL OPERATION >>> On the windscreen The unit holder can be attached directly to the windscreen using the suction mechanism. > Press the carrier plate onto the four retaining lugs of the unit holder. > Select a suitable spot to attach. >...
Page 26: Adjusting The Unit Holder's Position
>>> GENERAL OPERATION Switching the Navigation device Adjusting the unit holder’s position Devices with magnetic holders > Loosen the fastening screws The unlocking button is not present. on/off (model dependent) until the carrier plate can be First place the navigation device with the moved without using excessive force.
Page 27: Switching On
GENERAL OPERATION >>> > Press the button for the required Switching on language. > Press the button on the top of the > The selection is confirmed by pressing Navigation device. unit switched manufacturer's logo appears on the touchscreen. > If you agree to the request contained in this prompt, press the button.
Page 28 >>> GENERAL OPERATION For devices without the I/O switch on the Basic information about the Operation underside: When you touch a button on the touch touch screen > Press the switch on the top of the screen, the button in question is briefly navigation device for longer than The Navigation device is fitted with a shown outlined in red to confirm the...
Page 29: Basic Information About The Touch
GENERAL OPERATION >>> Basic information about the You can tell whether a telephone is If route guidance is already active, the already connected by the symbol on the current destination address and a button menus button. for cancelling route guidance will be Phone displayed between the two rows of During operations, you are assisted by...
Page 30: Entries Made With The Entry Menu
>>> GENERAL OPERATION Entries made with the entry menu Entering characters Accepting proposals Characters are entered by pressing the During entry, the Navigation device Some applications require entries to be keys in the central area. makes proposals in the uppermost line. made via the entry menu.
Page 31: Scrolling Through The Lists
GENERAL OPERATION >>> The selection list appears. Scrolling through the lists If you have already entered some of the letters of the selection you want, you can use the selection list to display all the destinations containing the combination of letters in question. >...
Page 32: Other Character Sets
>>> GENERAL OPERATION Other character sets Entering numbers Switching between upper and lower case: Different character sets can be selected Switch to the numbers keyboard in order During free text entry, it is possible to for the keyboard of the Navigation to enter figures.
Page 33: Deleting Characters
GENERAL OPERATION >>> Content Manager Deleting characters The back button To delete the last character, use the back button is located on the The Content Manager is a PC-based key. bottom left of the device. application containing a number of important functions to help you manage the content on your Navigation device.
Page 34: Installing The Content Manager
> If the application does not start automati- Note: cally, please start the file "CONTENT- When connect Becker MANAGER" manually in the folder Navigation device to the PC for the first "Becker_Content_Manager_Setup". time, the PC installs all the necessary > Select a language from the list and...
Page 35: Transferring Pictures
Manager with the version already Images*, music* and videos* can be > Select installed. Becker stored on a separate Micro SD memory > Click on Content Manager • If the new version is a critical update, card (not included in the scope of...
Page 36: Faults
You can also try to find a solution to your problem in the FAQ in the Support area Becker homepage (www.mybecker.com). Note: Never attempt to open the unit yourself.
Page 37: Navigation Mode
NAVIGATION MODE >>> What is navigation? Signals from at least three satellites are Navigation Mode ¤ Safety instructions required to determine your position; The term "navigation" (lat. navigare = to • Road traffic regulations always take your height above sea level can be travel by sea) is generally understood to priority.
Page 38: Selecting Navigation
>>> NAVIGATION MODE Selecting Navigation Note: The menu items Navigation mode is called up from the Set current position (fast main menu. New destinations can be Select from last destinations access mode) can also be used to select entered in the menu " ".
Page 39: Smart Guess
NAVIGATION MODE >>> Last destinations list The destination list The destination list displays, line by line, The last destinations visited and saved all destinations available for fast dialling. destinations are displayed in the Last Each line of the destination list is divided destinations list and can be selected into two fields.
Page 40: Icons Used
>>> NAVIGATION MODE Icons used Operating the last destinations list Displaying or editing a destination The following icons are used in the Any destination stored in fast access Start with existing destination destination list: mode can be displayed and edited. The existing destinations are listed in the >...
Page 41: Personal Destinations
NAVIGATION MODE >>> Personal destinations Selecting a destination from Personal Option Meaning Using the button destinations Personal destinations The protection is re- Remove you can call up Google points of ™ moved from the desti- You can call up Google points of inter- ™...
Page 42: Editing Personal Destinations
>>> NAVIGATION MODE Editing Personal destinations Selecting a destination from Contacts > In the list of your own destinations, ® ® You can call up Microsoft Outlook press the button in front of the contacts that have been imported into destination that you wish to edit.
Page 43: The New Destination Menu
NAVIGATION MODE >>> 10 entries, a list of contacts is displayed The New destination menu straight away. > In the input menu, select the first letters of the entry you are looking for. > Press the button when the name you want is displayed in the top line.
Page 44: Layout Of The New Destination Menu
>>> NAVIGATION MODE Layout of the New destination menu Select on map Entering the address With the button , you can Select on map button in the Enter address Enter address select a destination directly on the map destination input menu opens the menu The various steps from selecting an and start route guidance.
Page 45: Selecting A Country
NAVIGATION MODE >>> Selecting a country Selecting an address and starting route Note: You can select a country from those guidance If required, press the arrow keys available using the button for the country You can enter the exact destination or use the scroll wheel on of destination.
Page 46 >>> NAVIGATION MODE Selecting a town Using the town list Note: The destination can be entered by either Once a few letters of the desired town If two words need to be entered you using the name or ZIP code. have been entered you can display a list must separate them with the character When you enter the letters of a place, the...
Page 47 NAVIGATION MODE >>> Selecting the street Using the street list Selecting the Intersection In the menu field the street and Once a few letters of the desired street After entering the destination town and Street house number can be entered separate- have been entered you can display a list street, you can enter a junction so as to ly using a letter and number field.
Page 48 >>> NAVIGATION MODE Selecting a house number Displaying the route Storing a destination After entering the destination town and Once the address has been entered, the In the address input menu, the Save street, you can enter a house number so address input menu allows the route to button opens a menu where a name can as to further limit the choice.
Page 49 NAVIGATION MODE >>> If the route guidance is already running Note: Note: and a waypoint has already been entered The symbols above the progress bar If there is no GPS signal when the route you will be asked whether the new refer to restrictions that you may have is calculated, the following will be destination should replace the old...
Page 50: Route Guidance
>>> NAVIGATION MODE If your entry is unique, after a short time Entering address by speech (selected models) You can start the spoken address entry the menu for entering addresses will be from the address entry menu by press- displayed with your entry filled in. ing the button.
Page 51: Models)
NAVIGATION MODE >>> If your entry was not unique or the Entries identified with the symbol Please speak Navigation device was not able to open up a further list when they are uniquely assign your entry, you will be selected. This can be necessary if, for shown appropriate lists.
Page 52: Route
NAVIGATION MODE or you have not set a home address (be- • Block road With the Live POI Search your Becker cause this is the first time you have used If there is not currently a route activated, navigation device establishes a connec- the device), these fields are greyed out.
Page 53: Point Of Interest In The Vicinity
NAVIGATION MODE >>> > In the main menu, press the button Point of interest in the vicinity Note: > Press the button. New destination POI nearby You can only select points of interest in the area in question if the GPS reception is adequate for determining a position.
Page 54: Point Of Interest Near To An Address
>>> NAVIGATION MODE If you have selected the category, any > Select the desired point of interest. Point of interest near to an address points of interest belonging to the > Press POI near location relevant category and available within the area in question will now be displayed.
Page 55: Point Of Interest Near To Destination
NAVIGATION MODE >>> By pressing of the button next to Entering a point of interest directly the selected POI, you can display the > Press the button. POI search by name additionally available information for the destination. Point of interest near to destination >...
Page 56: Calling Special Destination Phone Number
>>> NAVIGATION MODE > Press the to begin route guidance Additional point of interest information Travel Guide (model dependent) Start to the point of interest straight away. Any additional information that is The Travel Guide acts in a similar fashion However, you can also display your provided for a point of interest can also to the "Enter point of interest"...
Page 57: Selecting A Destination From The Map
NAVIGATION MODE >>> You can also search for points of interest Selecting a destination from the map in the vicinity of your chosen point using You may also select a destination directly the POI nearby button. from the displayed map. However, you can also store your chosen point in fast access mode ( Save...
Page 58: Coordinate Entry
>>> NAVIGATION MODE > Then enter the desired values using Coordinate entry Route planning the buttons You can also enter your destination using The route planning menu allows you to The entry field at the beginning may be geographic coordinates. create and select individual routes.
Page 59 NAVIGATION MODE >>> By pressing you can now add Add stage a stage to the route. After pressing you can Rename route give the route a new name. Pressing will allow you to Delete route delete the route from the stored routes. Note: Selecting and starting a route >...
Page 60: Simulation Of The Route
>>> NAVIGATION MODE Simulation of the route Creating a new route Notice (depending on model): There is a play button on the left > Drücken Sie in der Routenplanung die Here you can define a loading time. under the map, used to start a simulation Taste Create new route This, in turn, has an impact on the calcu-...
Page 61: Editing A Route
NAVIGATION MODE >>> Editing a route Option Meaning > Select the route you wish to edit. The stage is moved Move down > Press the button in front of the backwards by one stage you wish to edit. position. The stage is deleted Delete stage from the route.
Page 62: Optimising A Route
>>> NAVIGATION MODE Navigation settings This will take you to the navigation Optimising a route If you have entered several destinations settings menu. The navigation settings contain all the for a route, you can use the Navigation settings that are relevant to the device to optimise the order of the Configuration navigation functions.
Page 63: The Map View Button
NAVIGATION MODE >>> > Press the button to select The Map view button whether to use 2D or 3D mode. You can select whether the map is to be > Press the button to select the displayed in 3D or 2D mode, in a split entire map.
Page 64: Auto Zoom
>>> NAVIGATION MODE The following setting options are • Auto zoom Street names 2D Street names 3D available in the extended settings: You can select whether the street > Press the button in the Auto zoom names should be displayed ( ) or not extended settings.
Page 65: Selecting Info Box Data Fields
NAVIGATION MODE >>> Select POI categories You can select which POI symbols are to be displayed on the map. > Press the button Select POI categories in the extended settings. > You can then switch the display of Touch the first field to select one of the entire categories on ( ) or off ( possible options.
Page 66: The Route Overview Button
>>> NAVIGATION MODE Under these options, you can select > Confirm your setting in the Advanced The Route overview button displays for the travel without a selected menu by pressing the button. With the options in this setup menu you route.
Page 67: The Guidance Info Button
NAVIGATION MODE >>> The Guidance info button Setting Meaning In the settings window Guidance info When this function is Signposts select which additional activated, you receive information you would like displayed additional important during route guidance. information at traffic > Press the button in the Guidance info junctions about the...
Page 68: The Route Options Button
>>> NAVIGATION MODE The Route options button Setting Meaning Setting Meaning You can edit your driving profile in the When this function is Tunnel View If this function is Country info settings window. The Route options enabled, you will activated, you will see a settings made here have an effect on the automatically receive three-dimensional...
Page 69: Selecting The Vehicle Profile
NAVIGATION MODE >>> The different profiles are displayed and The window for selecting the maximum Selecting the vehicle profile (depending on you can select the desired profile by speed is displayed. model) This setting influences the calculation of pressing the appropriate button. the expected time of arrival and blocks Saved profile truck with trailer e.g.
Page 70: Truck And Mobile Home Functions (Depending On Model)
>>> NAVIGATION MODE You have different operation options in Truck and mobile home functions (depending Notes: the car or truck profile menus displayed. on model) In the map display, roads are displayed You can select or set the vehicle profile. You do not have any further setting op- with a light red contour if no specific in- For the truck profiles (depending on the...
Page 71: Setting Truck Profiles
NAVIGATION MODE >>> With the three saved truck profiles you Setting trailer and axles Setting truck profiles have the option to customize the truck > In the profile settings, press the button Notes: symbol and name for the trailer and axle settings. This function is only available with mod- The window is displayed for select- els with optimized route navigation for...
Page 72: Selecting Vehicle Category And Name
>>> NAVIGATION MODE > Press the button next to the weight to > Select the required tunnel category. Selecting vehicle category and name be entered. If you do not select any of the available Once you have changed one of the truck An entry menu will appear.
Page 73: Selecting The Route Type
NAVIGATION MODE >>> > Press the button to change the Selecting the route type Time-dependent route guidance displayed symbol. > After pressing the button, If this function is switched on ( Route type select one of the following options. information (statistical information) on the possible speed on certain segments Option Meaning...
Page 74: Avoiding Particular Types Of Road
>>> NAVIGATION MODE Avoiding particular types of road The TMC button Setting Meaning After pressing the button you can Avoid You can configure settings for the This button allows you Rerouting exclude various types of road (e.g. reception of traffic announcements in to choose whether the ), from motorways...
Page 75: The Traffic Button (Model Dependent)
NAVIGATION MODE >>> • The Traffic Button (model dependent) The Voice guidance button Volume You can select the standard volume for When the navigation device has access In the settings window Voice guidance voice announcements for each start of to the server, the heading and an- you can make settings relating to the Traffic...
Page 76: Setting The Voice
>>> NAVIGATION MODE • Setting the Voice Setting the Volume Announce streets Using the button In the settings window you can set With the settings window, you Announce streets Voice Volume you can switch the announcement of the voice that will make the navigation can set the standard volume for voice the names of streets into which you announcements for the language that...
Page 77: The Warnings Button
NAVIGATION MODE >>> • • The Warnings button Driver alerts (depending on the Environmental zones (depending on model) model) In the settings window you can Warnings You can have signs displayed, for You can let yourself be warned about select which warnings are to be example for dangerous curves or environmental zones.
Page 78: Setting Environmental Zones (Depending On Model)
>>> NAVIGATION MODE The following signs are available in the Setting Driver alerts Setting environmental zones (depending on If this information is saved in the map individual categories: model) material and is supported by your • Curve warnings navigation device, you can display This category includes warning signs information signs, e.g.
Page 79: Setting Speed Info
NAVIGATION MODE >>> tively. By pressing the symbol with the Setting Speed info bell, you can set the audible warning sig- settings window allows Speed info nal ( audible warning signal acti- to select whether speed limits are vated). displayed in parallel to the navigation. >...
Page 80: The Blocked Roads Button
>>> NAVIGATION MODE > Select the blocked road you want. The Blocked roads button Setting Meaning In the settings window Blocked roads Select the amount over Out of city you can unblock previously permanently the speed limit at which blocked roads (See "Blocking a section of you would like to receive the road permanently"...
Page 81: The Vehicle Data Button
NAVIGATION MODE >>> You can now set whether or not the road The Vehicle data button Note: should be blocked for each day of the This menu allows the calculation of an Press the , button to set a Block 24 h week.
Page 82: The Format Button
>>> NAVIGATION MODE The Format button The Time button In the settings window you can You can select the time zone relevant for Format > Press the button to enter Extra-urban set the measurement units to be used your location in the settings Time the average fuel consumption of the...
Page 83: Resetting Navigation Mode
NAVIGATION MODE >>> Traffic announcements using The Reset button Note: You can reset the navigation settings to TMC (depending on the model) As the traffic announcements are their factory settings. transmitted by radio stations, we cannot The settings will then be reset. The fast Your Navigation device can receive assume responsibility...
Page 84: Live Traffic - Traffic
>>> NAVIGATION MODE Live Traffic - Traffic Announce- Displaying TMC messages on the map Notice: Current TMC messages are displayed on ments via Data Connection The data transmission via your mobile the map graphically. Sections of the phone may involve additional costs de- (model dependent) route where there are traffic problems pending on the mobile phone contract.
Page 85: Using Tmc
NAVIGATION MODE >>> The part of the route with the travel Using TMC direction When the Navigation device has been at- If a TMC message lies on your route, tached to the carrier plate (power supply the message is indicated by the sign with the integrated TMC antenna con- nected), your Navigation device will re- Traffic announcements received via...
Page 86: Reading A Message
>>> NAVIGATION MODE Reading a message Taking announcements into > Press on the desired message in the consideration when calculating routes list. The message display appears on Your Navigation device can take traffic the top of the screen, while a map is announcements into consideration when displayed below it with the related calculating a route.
Page 87: The Map Display
NAVIGATION MODE >>> The red route or route marked blue for The map display Structure of the map display an obstruction shows the previous route. The structure depends on the settings The map display is used primarily for The route marked yellow displays the made in "Map display options"...
Page 88: Map Display With Route Guidance
>>> NAVIGATION MODE Speed limit on the road currently Power level/telephone status Your current position is displayed on the being driven (display (depending on the model) map via the position icon. available for all roads), signs for the Button for calling up the options driver alerts will also be displayed Traffic lane recommendation (only Zoom buttons...
Page 89: Split Screen With Route Guidance
NAVIGATION MODE >>> If you press the Info box again, more or Information is also displayed in the Split screen with route guidance less fields are displayed. At least one bottom left corner in the preview area. field and a maximum of three fields can be displayed.
Page 90: Route Guidance With Arrow Display
>>> NAVIGATION MODE Traffic lane recommendation (only Route guidance with arrow display Note: appears on some multi-lane roads; If you follow the lane recommendation, green arrows = recommended the next driving maneuver is possible lanes) without changing lanes. Note: Next driving maneuver If you follow the lane recommendation, Current street or street to which the the next driving maneuver is possible...
Page 91: Map Display With Junction View
NAVIGATION MODE >>> Tunnel view Note: When your enter a longer tunnel, a three The tunnel view provides a schematic dimensional tunnel view appears. If view of the route layout of the tunnel. there is no maneuvres performed in the The whole tunnel layout, the first route next 1000m in the tunnel, the lane of the section and the vehicle position are...
Page 92: Using The Map Display
>>> NAVIGATION MODE An x now appears next to the speaker Using the map display Changing the announcement volume The volume of announcements can be symbol . With pressing the Repeating the last announcement adjusted. button, you can make the volume control During route guidance, the system elements disappear.
Page 93: Map Zooming
NAVIGATION MODE >>> Map zooming Moving the map Map orientation The map can be zoomed into in steps by You can move the map to any point. When a route is activated, the map view using the zoom buttons. > To do this, press the map briefly. can be oriented in different ways.
Page 94: The Route Overview
>>> NAVIGATION MODE The viewing angle will be lower and the number of TMC announcements and You can orient the map for example in horizon is moved back after a while into POIs are displayed. the direction of travel. the image. >...
Page 95: The Detour Assistant
NAVIGATION MODE >>> The red line in the middle of the screen > Press the symbol. Note: represents your route. If this line ends A message is displayed with the If there is a traffic jam announcement with two points, then the list continues question "You are probably standing in a on the route, the TMC symbol and you can scroll through the complete...
Page 96: Map Display Options
>>> NAVIGATION MODE lot to the destination are governing for Map display options Note: the selection. The scope of the displayed functions In the map display options, you can > Touch a parking possibility on the map depends on whether route guidance or change the settings for route guidance, to select it.
Page 97: Displaying The Whole Route
New route Displaying the whole route Move route (model-dependent) (Only available when route guidance is Becker RouteMove allows you to move active.) your route with a single movement of You can have the whole route to the your finger, providing a rapid means of destination displayed on the map.
Page 98 >>> NAVIGATION MODE Blocking route sections/roads > Select to block Block for current route You can block individual route sections/ the section of the route for the current roads. The Navigation device then calcu- route guidance session only. lates a sensible diversion to avoid the Note: blocked section.
Page 99: Change Route Options
NAVIGATION MODE >>> Selecting alternative routes Change route options Canceling route guidance You can have the different routes (Only available when route guidance is (Only available when route guidance is displayed by the navigation device. active.) active.) > When the whole route is displayed, You can change the route options (route You can cancel the active route guidance.
Page 100: Entering/Deleting A Stopover
>>> NAVIGATION MODE Entering/deleting a stopover Blocking route temporarily (Only available when route guidance is Using the option, you Block road ahead active.) can block a stretch of road ahead With this function, you can enter a temporarily. This determines a certain stopover, or you can delete an entered stretch of road that should not be used.
Page 101: Setting Day/Night Display
NAVIGATION MODE >>> If route guidance is active, you can select Setting day/night display Displaying current position (Where am I?) a road length between 200 m and 50 km. You can switch the Navigation device As soon as you selected the stretch, a You can display your current position, display from day to night and vice versa.
Page 102 >>> NAVIGATION MODE number 112 (depending on model) if a your disposal. Also see chapter "Tele- mobile telephone is connected to your phone calls" on page 116. navigation system and has reception. With the Hospital button, you can change Before dialling the emergency call directly to the places of interest category number, you must confirm this once Hospital in the current vicinity.
Page 103: Entering The Destination
NAVIGATION MODE >>> Displaying/selecting different routes Entering the destination Skipping a destination You can use the Navigation device to (Only available when route guidance is If a planned route with several destina- display various routes. not active.) tions is active, you may delete the cur- >...
Page 104: Supplementary Functions For Trucks And Mobile Homes (Selected Models Only)
>>> SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) Depending on the selected settings (see Supplementary functions for trucks and mobile homes (selected models only) Zooming in on the map page 71 onwards), a number of helpful You can gradually zoom in and out of the supplementary functions are made map using the Zoom buttons.
Page 105: Warnings Without Planned Route
SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) >>> described in the chapter "Feedback after On the avoided (blue) route, the restric- Warnings without planned route route calculation". When the driver warnings function is ac- tions are displayed with signs. Select a You have the following options: tivated in the navigation settings, you will traffic sign on the map to display a de-...
Page 106: Other Additional Functions
>>> OTHER ADDITIONAL FUNCTIONS (ONLY SELECTED MODELS) Height profile for alternative routes: Other additional functions (only selected models) Display height profile You can display a height profile from the Show route or Alternative routes view. To do this, select the button.
Page 107: Selected Models)
TELEPHONE MODE >>> If your navigation device has an Calling up the telephone mode If Bluetooth® wireless technology is Telephone mode integrated Bluetooth® wireless activated and the Navigation device is (only selected models) technology interface, you can connect it already connected to a cell phone, the to a mobile phone equipped with telephone menu is displayed.
Page 108: Telephone Menu
>>> TELEPHONE MODE The Navigation device now attempts to Telephone menu (only selected In the upper area of the telephone menu, reconnect the cell phone last connected. the signal strength of the cell phone, the models) When the connection is established, the charging level of the cell phone, the tele- telephone menu is displayed after a phone name and the network provider...
Page 109: Phonebook
TELEPHONE MODE >>> > In the telephone menu, press the Phonebook Dial Note: In the phonebook, the system displays button. the phonebook entries loaded from the Press the button to delete the SIM card and from the memory of the characters entered.
Page 110 >>> TELEPHONE MODE > In the input menu, select the first Note: Icon Meaning letters of the entry you are looking for. You may also first have a list displayed Private phone number Note: that corresponds letter • For example,if you entered the letters combination entered.
Page 111: Scrolling Through The Call List
TELEPHONE MODE >>> Each row of the call list is divided into Call list Icons used fields. Each list field is designed as a The following icons are used in the call In the call list, the last dialled, answered button.
Page 112: Dialing An Available Number
>>> TELEPHONE MODE Dialing an available number Lists loaded from cell phone Selection Meaning You can dial the numbers/names in the > In call list, call The data for the entry is Show details call list directly. corresponding list using the Missed displayed (number and >...
Page 113: Connecting Bluetooth® Telephones
TELEPHONE MODE >>> The device list shows line by line all cell Connecting Bluetooth® telephones Selection Meaning phones that were already connected to So that you may make and receive calls The device is moved one Move up the Navigation device. with your Navigation device, a cell phone position forwards/back- Move down...
Page 114: Automatic Connection
>>> TELEPHONE MODE Automatic connection Searching for cell phones After activation, your Navigation device Note: attempts to establish a connection to the Prior to a search, switch on Bluetooth® cell phone last connected. on the cell phone to be searched for. You can switch this function on or off as >...
Page 115: Connect New Devices
TELEPHONE MODE >>> Connect new devices Connecting a mobile phone Disconnecting a connected telephone You can initiate a connection to another You can also attempt to establish a You may disconnect the connection to a mobile phone using the button connection to the Navigation device from Devices cell phone currently connected via...
Page 116: Telephone Calls
>>> TELEPHONE MODE Telephone calls If you have switched on the automatic Accepting a call call acceptance described For an incoming call, a ringing tone will In the telephone calls section, you can "Automatic call acceptance" on page 119, sound. Also the following is displayed. find a summary of the control options the time to call acceptance is also that are available for establishing a call,...
Page 117: Ending A Call
TELEPHONE MODE >>> > To call the options menu of the call Ending a call During a call screen, press the button. Options You can end an active call. During a call, you have various control options. > In the call screen, press the End call button.
Page 118: Telephone Settings
>>> TELEPHONE MODE • Telephone settings Start Private mode Hands free You can transfer a call back to the cell In the menu, various pages with the The telephone settings include all the phone. The hands-free function is then functions are available: settings relevant for the telephone ended.
Page 119: Automatic Connection
TELEPHONE MODE >>> Bluetooth® Automatic call acceptance Telephone volume With the ® button, you can With this function, you can set whether With this function, you can set the Bluetooth switch Bluetooth® on or off. or not or after which time an incoming volume of the ringtone and the volume call is accepted automatically.
Page 120: Updating The Phonebook
>>> TELEPHONE MODE Updating the phonebook Bluetooth® name With this function, you can update or With this function, you can assign a retransfer stored phonebook name for your Navigation device. This entries in the Navigation device. assigned name will then be displayed by other Bluetooth®...
Page 121: Travel Guide (Model Dependent)
TOOLS >>> Under Tools, the following functions Travel Guide (model Press the button and then re- Tools are grouped together, depending on turn to the screen last viewed. De- dependent) the model: pending on the model, the button will be on the map. •...
Page 122: The Image Viewer Menu
>>> TOOLS The image viewer menu Selecting an image In the image viewer menu, you can select images, start a slide show and call up the settings. A message is displayed stating that the image viewer must not be used when >...
Page 123: Enlarging The Image
TOOLS >>> Press the buttons to the left and right of Enlarging the image Displaying image information the image to move to the next or > Show the image menu. > Show the image menu. previous image. > Press the button.
Page 124: Slide Show
>>> TOOLS Slide show Traffic forecast (depending on model) In the slide show, all the pictures in the With the traffic forecast, you can observe current folder level are automatically the expected flow of traffic. displayed sequentially. The data is based on historical traffic >...
Page 125: Country Information
TOOLS >>> • With the buttons you Country information can change the section of the The country information enables you to map. display country-specific information for numerous countries (maximum permit- • With the button you can ted speed, alcohol limits, etc.). display the complete route on the screen if available.
Page 126: Blocking A Section Of The Road
>>> TOOLS Blocking a section of the road The points will be marked by the letters Symbol Meaning A and B. permanently Speed limit in built-up areas > Define the direction of blockage for the road section (from A to B or from B With the Block option you can block indi- Speed limit outside built-up to A).
Page 127: Trip Computer
TOOLS >>> > Using the buttons set the first peri- Trip computer (depending on od when the road is to be blocked on model) this day. > Using the buttons set the second The Trip computer provides a data period when the road is to be blocked display with average speeds, maximum on this day if necessary.
Page 128 >>> TOOLS Travel time without breaks in the Press the button to stop the Stop journey recording. The time continues if you Travel time with breaks in the press the button again after Start journey stopping the recording. Compass Press the button to delete all Reset Calls up the stopwatch with lap...
Page 129: Operation
SETTINGS >>> Selecting system settings Settings The system settings menu Operation You can select the various settings You can change various basic settings Selection options optionsfrom the system settings menu. for all applications on the Navigation Select the desired menu item by press- device.
Page 130: The Individual Menu Items
>>> SETTINGS The individual menu items Automatic on/off The Navigation device can switch Battery automatically to sleep mode when the Your Navigation device may be operated vehicle ignition is switched off. using an external power supply unit or Prerequisite for this: an integrated rechargeable battery.
Page 131: Day/Night Display
SETTINGS >>> • Bottom icon: The function is switched Day/night display Brightness off, the Navigation device does not You can set the Navigation device display You can set the brightness of the display switch off automatically. to day, night or automatic. separately for day and night display.
Page 132: Design By Day
>>> SETTINGS > Confirm your selection by pressing the Design by day Design by night With this option, the menu and map Two schemes with different contrasts back button . The new night display during the day can be switched to are available to select for the map display will take effect when activating the colours and contrast of night display.
Page 133: Setting The Colour
SETTINGS >>> Scrolling Setting the colour Language You can change the colour of the icons The texts on the touch screen can be Using the buttons or the scroll and other design elements. displayed in a variety of languages. wheel, it is possible to scroll through the list in the direction of the relevant arrow.
Page 134: Keyboard Layout
>>> SETTINGS Keyboard layout Selection Meaning You can switch the sequence of the Manual It is possible to manually keyboard layout by selecting the switch over to the reversing corresponding key. camera. In the menu, Tools a corresponding menu item is then available Sounds >...
Page 135: Driver Profiles (Depending On Model)
SETTINGS >>> The following .. are stored in the driver Driver profiles (depending on model) Renaming driver profile profiles: You can select 4 different driver profiles. • Home address • Last destinations • Planned routes • Blocked roads • Last calls You can rename the selected profile by •...
Page 136: Deleting Driver Profile
>>> SETTINGS Deleting driver profile Driver profile Pro (model dependent) Besides the functions described in the previous chapter, a Bluetooth® tele- phone can be used for automatically changing the profile on devices with Driver Profile Pro. Whenever the naviga- tion device is switched on and the last Press the Set Auto-connect button.
Page 137: Service Information
SETTINGS >>> Service information Factory settings Calibration (model dependent) following button displays You can reset your Navigation device to If the touch screen responds incorrectly information regarding the Navigation the factory settings. when buttons are pressed, it needs to be device.
Page 138: Wifi Settings (Model Dependent)
>>> WIFI SETTINGS (MODEL DEPENDENT) You can establish a data connection to a network, you can select it from this list WiFi settings (model dependent) WiFi network (a telephone, for example) without having to enter a password Notice: from your navigation system. This func- again.
Page 139: Technical Terminology
TECHNICAL TERMINOLOGY >>> JPG/JPEG Technical terminology (Greenwich Mean Time) (Global Positioning System) (Joint Photographic Experts Group) Central European Time standard GPS determines your actual geographi- The JPEG is the most common type of Standard time at 0 degree longitude (the cal position by the use of satellites.
Page 140 >>> TECHNICAL TERMINOLOGY Stylus A stylus is an input pointer which is used (Traffic Message Channel) for the operation of touch-screens, mo- Traffic announcements transmitted by bile phones or PDAs. most FM stations via RDS. Basis for The stylus consists basically of a plastic dynamic navigation.
Page 141: Index
index INDEX >>> Call lists ......111 Numerics Connecting a telephone ...113 3D display .
Page 142 >>> INDEX ID3 tag ......139 Navigation ......37 Restrictions Image viewer .
Page 143 INDEX >>> Short route ......73 Slide show ..... . .124 Vehicle profile Speed limit .
Page 144: Model Overview And Technical Specifications
>>> MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications  : standard Navigation system - : not available : optional Weight 200 g 200 g 200 g 200 g 300 g 300 g 220 g 330 g 330 g 200 g Processor in MHz Flash memory...
Page 145 MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS >>>  : standard Navigation system - : not available : optional Weight 311 g 320 g 320 g 320 g Processor in MHz Flash memory 4 GB 4 GB 8 GB 8 GB SD-RAM 256 MB 256 MB 256 MB...
Page 146: Notice
>>> NOTICE Dear customer, NOTICE In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonized national regulations. This designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility.
Page 147: Disposal Of The Unit
NOTICE >>> Disposal of the unit Customer information on the disposal of electrical and electronic devices (private households) According to the self-proclaimed corporate principles of United Navigation GmbH, your product has been developed and manufactured from high-quality, recyclable materials and components. This symbol on the product and/or accompanying documentation means that electrical and electronic products must be disposed of separately from the houshold garbage at the end of its service life.
Page 148: Disposal Of The Battery
>>> NOTICE Disposal of the battery Duty to supply information according to battery legislation (BattV) Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteries via specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.
Page 149: Removing The Battery
NOTICE >>> > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Unscrew and remove the housing screws (model dependent) using a small screwdriver. > Lever off the rear of the housing using a flat-blade screwdriver (placed at the slits on the sides of the housing).
Page 150 >>> NOTICE For devices without screws on the bottom side of the device (model dependent): > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Lever off the front cover using a flat-headed screw driver (placed between the display and display frame). >...
Page 151 - Germany...

This manual is also suitable for:

Active.5 lmu plus be b10 Active.6 ce lmu be b30 Active.6 lmu plus be b40 Professional.5 lmu be b20 Professional.6 lmu be b50 Transit.6 lmube b50 ... Show all

Becker active.5 CE LMU BE B00 Operating Manual

Contents

Warranty

Safety Instructions

The Navigation Device

Overview of the Scope of Delivery

Overview of the Navigation Device

General Operation

Navigation Mode

Supplementary Functions for Trucks and Mobile Homes (Selected Models Only)

Models)

Other Additional Functions

Tools

Wifi Settings (Model Dependent)

Technical Terminology

Index

Specifications

Model Overview and Technical

Notice

Quick Links

Need help?

Questions and answers

Related Manuals for Becker active.5 CE LMU BE B00

Summary of Contents for Becker active.5 CE LMU BE B00