System Pin; Telephone Reset - Gigaset A540 User Manual

Call protection with Blacklist
i
When activated, calls from numbers in the Blacklist are shown in the display only. Your phone does not ring.
• The setting applies to all registered handsets and the base.
• You can store up to 15 numbers.
• The blocked calls are stored in the calls list and recorded on the answer machine. However, call
screening will be deactivated in this case.
Activating/deactivating the Blacklist
¤ ¤
q Settings
Menu
OK ( ³ = activated)
Editing the Blacklist
¤ ¤
q Settings
Menu
OK... then
• New entry:
• Delete entry:
• Close Blacklist:
Copying a number to the Blacklist from the calls list or while playing back a message
¤
• From the calls list:
. . . open calls list
¤ ¤
• While playing back a message:
q Copy to Blacklist
Menu

System PIN

Changing the system PIN
¤ ¤
q Settings
Menu
PIN with ~ (default setting: 0000)
Resetting the system PIN
i
The system PIN can be reset to 0000 at any time, if the PIN has been lost.
• All base settings are reset!
• All handsets are de-registered!
¤
Remove the power cable from the base
simultaneously reconnect the power cable to the base
least another 5 seconds

Telephone reset

¤ ¤
The base and handset settings can be reset independently of one another.
q Settings
Menu
i
security question with OK
• When resetting the handset (Reset Handset), audio and display settings will be deleted.
• When resetting the base (Base Reset) ECO DECT, answer machine and system settings are reset and
call lists/answer machine lists are deleted.
The following are not affected:
• Date / time,
• Registration of handsets to the base and the current selection of the base,
• System PIN,
• Entries in phonebook,
• Redial list.
¤ ¤
q Telephony
OK
¤ ¤
q Telephony
OK
¤
New
¤
. . . select entry with q
¤
press End call key a
¤
. . . select entry with q
¤
OK
¤ ¤ ¤
q System
OK ¤ ¤
OK
¤
Hold down the registration/paging key on the base and
¤ ¤ ¤
q System
OK
¤ ¤
q Call Protection
OK
¤ ¤
q Call Protection
OK
¤
Del.
¤ ¤
q Copy to Blacklist
Menu
¤ ¤
q System PIN
OK
. . . enter new system PIN with ~ (4 digits; 0 - 9)
¤
Hold down the registration/paging key for at
¤
q Reset Handset/Base Reset
OK
Adjusting the telephone settings
¤ ¤
OK Activation
¤ ¤
q Black List
OK
¤
OK
¤
. . . enter the current system
OK
¤ ¤
. . . Answer the
OK
¤
¤
¤
OK
25