Related Manuals for Yale Keyfree Connected
Summary of Contents for Yale Keyfree Connected
- Page 1 Keyfree User Guide Connected DO NOT FIT KEYFREE UNTIL DOOR INSTALLATION IS COMPLETE. PLEASE READ THE INSTRUCTIONS BEFORE USING KEYFREE. KFCON-UG Rev. 001...
- Page 2 INTRODUCTION Keyfree Helpine: 01902 364606 Email: smartlocks@yale.co.uk Website: www.yale.co.uk...
-
Page 3: Table Of Contents
CONTENTS Introduction Safety Precautions Product Features Getting Started Lock Overview Set/Change Master Code Set/Delete User Code Opening and locking Set One Day Codes Register/Delete Key Fobs Change Relock Time Silent Mode On/Off Smart Home Connecting to a Home Automation System Extra Features Passage Mode Child Safety Mode... -
Page 4: Safety Precautions
Safety Precautions Please read this carefully Locking from the outside When you leave your home be sure to Be careful not to let any unauthorized To maintain the high quality finish, lift up the handle in the given time so users discover your PIN code. -
Page 5: Smart Home
By adding the corresponding module, your Keyfree lock can be integrated with your home automation system. Key Fob Entry (Optional) A Yale key fob can be assigned to allow the lock to be unlocked remotely. Emergency Backup In the event of power failure in the lock, a 9 volt battery (PP3) can be connected to the front of the lock... - Page 6 Lock Overview Basic Contents The contents of this product may be subject to change without notice for performance or quality improvement. ¨ Basic Contents Keyfree User Guide Connected DO NOT FIT KEYFREE UNTIL DOOR INSTALLATION IS COMPLETE. PLEASE READ THE INSTRUCTIONS BEFORE USING KEYFREE. KFCON-UG Rev.
- Page 7 Lock Overview Front (Front Body, install on the outside of the door) (Front Body, installed on the outside of the door) Pull down Emergency Cover Keypad (10-Key) Enter button Lever Handle 9V Emergency button battery (Sold separately) Emergency Power Supply Terminal Reset button Keyhole...
- Page 8 Changing Master Code Registration The master code is the main password to the lock. As well as allowing entry through the door, it is also used to configure the lock including adding and removing users. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin...
- Page 9 Setting a User Code The lock can hold up to 20 unique user codes, each one has a slot in the locks memory from 1 to 20. If a new code is written to a slot that already holds a code it will overwrite it. Because of this it is important to record which codes are stored in each slot.
- Page 10 Deleting a User Code To stop a user having access their code will need to be deleted. Before doing this you will first need to know which slot in the locks memory their code is in. Please see the user code log at the back of the guide. Step Icon Expected Feedback...
-
Page 11: Opening And Locking
Opening & Locking Securely Locking Your Door Inside: Press push button & lift the handle. This can be done anytime and will always fully secure your door. Outside: Close the door and lift up the handle within the set connection time Once the lever disengages you must enter your PIN or press any button on the key fob and lift up the lever within the connection time to securely lock your door. - Page 12 Setting a One Day Code The one day code is a code that will automatically expire after 24 hours. This allows short term access to be granted to someone. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin If you have forgotten the master code please Enter the master code, 2 tone beep...
- Page 13 Deleting a One Day Code A one day code can be deleted if it is no longer wanted. If not it will expire at the end of the 24 hour period. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin If you have forgotten the master code please Enter the master code, 2 tone beep...
- Page 14 Register Key Fob Yale key fobs allow you to open the lock at a distance of up to 15 metres. This requires both the Yale key fob and the corresponding lock module to work. Up to 5 key fobs can be registered on 1 lock, and like the user codes they each have their unique slot in the lock memory.
- Page 15 Delete Previously Paired Key Fob If a key fob is lost or stolen it can be removed from the lock so that it can no longer be used to open it. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin If you have forgotten the master code please Enter the master code, 2 tone beep...
-
Page 16: Change Relock Time
Change PIN Relock Time The relock time is the amount of time it takes for the external handle to disengage after the lock has been unlocked with a correct PIN. The default is 7 seconds. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin If you have forgotten the master code please... - Page 17 Change Remote Relock Time The lock can be set to unlock for longer periods of time unlocked remotely by a key fob or a home automation system. Step Icon Expected Feedback Description Press any button Press any button on the keypad to begin If you have forgotten the master code please Enter the master code, 2 tone beep...
-
Page 18: Silent Mode On/Off
Silent Mode On/Off The lock can be toggled between two modes. Sound assisted mode will provide a variety of sounds to provide feedback from the lock, where as in the default silent mode the only sounds will be an alarm, a low battery warning and feedback while changing settings in the lock’s menu. - Page 19 Smart Home Lock Module The Yale Keyfree lock can have a removable wireless communication module within the lock. This module is used for all wireless communications to both home automation systems and key fobs. In order to connect to a home automation system a new module may be required for the lock, however changing the module has the potential to disrupt the current wireless communications.
-
Page 20: Connecting To A Home Automation System
Smart Home Connecting to a Home Automation System Connecting to a home automation system is a two way process and may require the home automation system to be configured to look for a new device, please consult the manual that came with the system for more information. Step Icon Expected Feedback... - Page 21 Smart Home Disconnecting from a Home Automation System For security reasons a lock will not connect to a new home automation system if it is linked to another. If you have changed your home automation system please run through the disconnecting settings before adding the new one. Step Icon Expected Feedback...
-
Page 22: Passage Mode
Extra Features Child Safety Mode With child safety mode activation alarm activated, depressing inside handle will sound the alarm for 10 seconds to notify the door is open to any persons inside. Inputting your pin or pressing the key fob will cancel the alarm. If required the mode will then need to be activated. Step Icon Description... -
Page 23: Intrusion Alarm
Extra Features Intrusion Alarm The alarm sound continues for 30 minutes or until it is disarmed. Damage Alarm : If the circuit board of outer handle is damaged the alarm will sound. Or if the front handle is seperated from the door. -
Page 24: Incorrect Pin Lockout
Extra Features Incorrect PIN Lockout For security if the wrong PIN is entered 5 consecutive times the lock will lockout for 3 minutes. This is indicated by the lights on the keypad flashing. To Release Lockout Method Press any button inside of battery cover. Method Depress inside lever handle. -
Page 25: Emergency Power
Emergency Power Emergency Power Supply for Discharged Batteries If the batteries in the lock have completely failed emergency power can be provided by a 9V battery on the front body. To Supply Emergency Power Step Icon Description Open the emergency cover. Keep contacting the 9V battery onto the Contact the 9V battery emergency power supply terminal. - Page 26 Within 5 seconds of the two tone sound reconnect the cable running to the exterior escutcheon. The lock will play a three tone ascending tone and say “welcome to the Yale digital world” the master code is now set to 123456.
-
Page 27: Specifications
Specifications Specifications Operating Temperature -15˚C - 55˚C (5-131˚ F) Lasts appoximately 1 year (when lock is used 10 times a day) Contact Details Keyfree Helpine: 01902 364606 Email: smartlocks@yale.co.uk Website: www.yale.co.uk... - Page 28 Please keep your proof of purchase safe, this must be submitted when making a claim under this guarantee. Please note that it is a condition of this guarantee that your Yale product: Yale installation and maintenance instructions provided to you at the time of purchase.
-
Page 29: User Code Log
User Code Log Pin Codes Slot Number Name Pin Code (Optional) -
Page 30: Key Fob Log
Key Fob Log Key Fob Slot Number Name...
Need help?
Do you have a question about the Keyfree Connected and is the answer not in the manual?
Questions and answers