Sanyo DC-D9 Instruction Manual page 3

Mini component system
Hide thumbs Also See for DC-D9:
Table of Contents

Advertisement

CONNECTIONS
FM outdoor aerial
AM loop aerial
I
&,_______
..=.
.. . . -., . . . .,,
,.,;
J
..
. .
. . ..- .. . ..
.,".
.$< -.
. .
Note:
Do not connect the mains lead
to an AC outlet until all con-
nections have been made.
L==@
o
2
To an AC outlet
When the unit is first connected, the display switches automatically
to
the demonstration
mode.
To cancel this mode, turn the power on.
The system is not disconnected
from the mains unless the mains lead is
unplugged from the AC outlet.
Speakers
Connect the connector of the left speaker lead to the "L" SPEAKERS
socket and the connector of the right speaker lead to the "R" socket.
If you have difficulty inserting the speaker lead connector, turn it over and
reinsert it.
FM aerial
The FM indoor aerial is sufficient to receive most local FM broadcasts and
should be connected to the EXT. ANT terminal. Extend the aerial wire as
straight as possible and, while listening to the sound from the system,
secure it in a position which yields minimal distortion and noise.
In fringe areas or where reception is distorted or noisy, an FM outdoor
aerial (not supplied) should be connected instead of the indoor aerial. The
terminals will accept 75-ohm coaxial cable. Consult your dealer.
AM loop aerial
Assemble the loop aerial as shown in figure.
Unwind the aerial wires, then connect them to the AM LOOP ANT
terminals.
Place the loop aerial in a position which yields the best AM
reception, or attach it to a wall or other surface as shown in figure.
supplied)
Note:
To minimize
noise, the speaker, mains and any other leads should not
come close to the FM indoor or outdoor aerial lead and AM loop aerial. Do
not place the aerial leads close to the system.
Video equipment
Connect leads (not supplied) from the audio output sockets of a video
equipment
to the VIDEO sockets.
Headphones
Connect stereo headphones
(not supplied) to the PHONES socket for
monitoring or for private listening. The speakers are automatically
discon-
nected when headphones
are connected.
-2-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents