Advertisement
Quick Links
Travla C147
1U 15 INCH DUAL-MOTHERBOARD
mini-ITX RACKMOUNT CHASSIS
QUICK START
USER GUIDE
1.
Remove top cover
Remove screw "A" (x3)
1. Lift cover upward
2. Slide top cover to rear
Copyright © 2003-2005 Casetronic Engineering Group
2
1
Screw Idenfication Guide
A
5
Index
1) Remove Top Cover
2) Install 3.5" HDD to drive bay holder
3) Install compact flash to drive bay holder
4) Install 2.5" HDDs to drive bay holder
5) Install drive bay holder with 2.5" HDDs to
1U chassis
6) Install drive bay holder with 3.5" HDDs to
1U chassis
7) Install motherboards to 1U chassis
Front Connectors
Power Switch
USB 2.0
IOIO
Compact Flash
Combo Inlet
WARNING: Install and service to
this product is performed only by
qualified personnel to avoid risk of
injuries.
B
C
5
5
A. Flat head screw #6-5mm
B. Flat head screw M3-5mm
C. Hex head screw #6-5mm
Rear Connectors
Rear Mainboard
Connectors
Advertisement
Summary of Contents for Travla C147
- Page 1 Screw Idenfication Guide Travla C147 1U 15 INCH DUAL-MOTHERBOARD mini-ITX RACKMOUNT CHASSIS A. Flat head screw #6-5mm QUICK START B. Flat head screw M3-5mm USER GUIDE C. Hex head screw #6-5mm Index 1) Remove Top Cover 2) Install 3.5" HDD to drive bay holder 3) Install compact flash to drive bay holder 4) Install 2.5"...
- Page 2 1. Place motherboards onto 1U chassis with the right I/O gasket Case designs are subjected to change without prior notice. Please visit www.Travla.com for more information to this product. 2. Install screw "C" (x8) Copyright © 2003-2005 Casetronic Engineering Group.
Need help?
Do you have a question about the C147 and is the answer not in the manual?
Questions and answers