Intended use d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep Your Black & Decker rotary tool has been designed for the cord away from heat, oil, sharp edges or moving following applications using the appropriate accessories: parts.
b. Do not use the power tool if the switch does not turn it Take special care when sanding paint which is possibly on and off. Any power tool that cannot be controlled with lead based or when sanding some woods (e.g. MDF) and the switch is dangerous and must be repaired.
Overview Warning! 1. On/off switch 2. Spindle lock Let the tool work at its own pace. Do not overload. 3. Speed control knob If you are not sure about the correct speed setting, start 4. Collet with a low speed setting and gradually increase it until you 5.
Protecting the environment EC declaration of conformity RT650 Separate collection. This product must not be Black & Decker declares that these products conform to: disposed of with normal household waste. 2006/95/EC, EN 60745 Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not Level of sound pressure according to EN 60745: dispose of it with household waste.
Page 7
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk...
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...
Need help?
Do you have a question about the RT 650 and is the answer not in the manual?
Questions and answers