Samsung HW-HM60C User Manual page 10

REMOTE CONTROL
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Press SOUND EFFECT on the remote control to select a sound
mode. Select the STANDARD mode if you want to enjoy the
original sound. We recommend that you select a Sound Effect
mode based on the source material and your personal taste.
If there is more than one file on the device you are playing, and
you press the # button, the previous file is selected.
Press the Bluetooth POWER button on the remote to turn the
If the SoundStand is connected to a digital TV and the video
appears out of sync with the audio, press the Audio Sync buttons
Press the AUDIO SYNC +/- buttons to set the audio delay from 0
to 300 ms. In USB mode, TV mode, or BT mode, the Audio Sync
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's
battery cover
counterclockwise to
remove it as shown in the
figure above.
Turns the SoundStand on and off.
Adjusts the volume level of the unit.
SOUND EFFECT
Bluetooth POWER
Bluetooth Power function on and off.
See pages 16 and 17 for details.
AUDIO SYNC
to sync the audio with the video.
function may not work.
2. Insert a 3V lithium battery. Keep
the positive (+) pole facing up
when inserting the battery. Put the
battery cover on and align the '●'
marks side by side as shown in the
figure above.
10
POWER
POWER
MUTE
VOL
VOLUME
SOUND
EFFECT
Bluetooth
Skip Back
POWER
3. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
SOURCE
MUTE
WOOFER
LEVEL
Surr.
Sound
DIMMER
SYNC
SYNC
REPEAT