Page 3
Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Energy Star Compliant Product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products practices. Products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default.
Table of Contents Federal Communication Commission (FCC) Statement Energy Star Compliant Product Regulatory Certifications Introduction Features Optional Features About the User Guide Abbreviations and Acronyms Chapters in the Manual Installation Unpacking the Unit Preparing to Connect Connecting the Accessories and Power Supply Connecting to the Server Specifications Hardware...
Introduction Thin Clients are terminal devices that connect to multi-user application servers operating under Citrix MetaFrame and Windows Server 2000/2003 operating systems. This guide covers installation procedure and hardware details of Itona TC 15yy series.. 1. Power Button. 2. USB Ports. Figure 1: ItonaTC15yy Itona TC 15yy series delivers smart and robust solutions for Thin Client computing.
Optional Features Wireless LAN is an optional features available for Itona TC15yy series. Note: The optional features cannot be upgraded after the purchase of the product. Please contact the reseller or dealer from whom you purchased the product for information about optional features.
Chapters in the Manual Chapter No Chapter Name Description Introduction Contains an overview of the product, information about this guide and abbreviations used in this guide. Installation Contains the procedure to set up the hardware. Specifications Contains hardware, mechanical, electrical, interface and operating environment specifications.
You have to install the client before you can use it. Installation involves setting up the hardware and connecting the peripherals required for normal use. To install the Itona TC15yy series hardware, perform the following steps: 1. Unpack the unit.
The various connectors available on the rear panel of the client are shown in Figure 2. 1. Wireless LAN 2. DVI-I Port 3. Ethernet Port 4. Mic 5. 3 USB port 6. DC input 16V /2.5A 7. Pedestal 8. Line Out Figure 2: Itona TC15yy Series Rear View Installation...
Connectors Connector Symbol DVI-I port USB port Audio output (LINE OUT) port Microphone input port RJ45 Ethernet port Table 3: Connector Symbols Note: Before connecting any cables, ensure that the power cable is unplugged from the unit. To connect various accessories and power supply: 1.
Page 13
Figure 3: LAN Connection through TCP/IP 3. Press the power button to switch on the ItonaTC15yy series thin client. The front panel LED lights up and the client starts with a beep sound. The Connection Manager screen appears. Note: To configure the client, refer to the Software User’s Guide. Installation...
Specifications Hardware Processor VIA C7 / TC1000 VGA Memory Shared Video Memory 32MB max Flash IDE 44Pin / 90D DDR2 SO DIMM Networking 10/100/1000Mbps Power Supply External Adapter Display Support 1920x1200 60Hz 16/32 Bits Mechanical Height 190 mm Width 36.5 mm Depth 142 mm Weight...
Troubleshooting This chapter contains solutions for problems you may encounter while using the product. Problem Solution The power-LED on front panel Ensure that the power cord is plugged into an AC outlet. does not glow when the client Check the fuse in the power-plug, if available. is switched on.
Appendix Connectors The following section provides pin details for various connectors on the rear panel of the client. 10/100/1000 Ethernet LAN Port RJ-45 modular 8-pin jack. 10/100/1000 Mbps. Signal TxD+ TxD- RxD+ RxD- DVI-I Port Pin C1 to C5 carry the analogue signal.24+ 5 pin DVI Connector. Signal Signal Signal...
Page 17
DDC Clock Hot Plug Detect Analog Green DDC Data TMDS Data 0- Analog Blue Analog Vertical Analog Horizontal TMDS Data 0+ Sync Sync TMDS Data 1- Analog Ground TMDS Data 0/5 (analog R, G & B Shield return) TMDS Data 1+ TMDS Data 5- Audio / Microphone Port Standard audio jacks.
Need help?
Do you have a question about the Itona TC15yy and is the answer not in the manual?
Questions and answers