Removing The Paper Feed Tray Lower Safety Switch - Riso RP-255 Technical Manual

FIRST PAPER FEED SECTION

8. Removing the Paper Feed Tray Lower Safety Switch

(1) Remove the screws (shoulder screw, M4 x 30: 2 pcs), securing the printer to the Risograph stand.
(2) Remove the rear cover.
(3) Slide out the machine from the Risograph stand (in the direction shown by the arrow in the
photograph) far enough to allow a screwdriver to be inserted in the mounting screws on the grip
handle [A]. Make sure that the rubber feet do not slip off the Risograph stand.
(4) From underneath the machine, remove the mounting screws (bind, M4 x 8: 2 pcs), and remove the
grip handle [A].
(5) Unplug the top connector [B].
(6) Unplug the switch connector [C] from the stay connector [D].
(7) Remove the mounting screws (washer, M3 x 14: 2 pcs), and remove the paper feed tray lower
safety switch [E].
0432
A: Grip handle
B: Top connector
C: Switch connector
D: Stay connector
E: Paper feed tray lower safety switch
A
D
E
[4 -18 ]
0433
B
C
0434