Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SCD-5083
Summary of Contents for Samsung SCD-5083
-
Page 1: Dome Camera
Super High Resolution WDR Dome Camera User Manual SCD-5083... -
Page 2: User Manual
Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. - Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-5083 SERIES • NTSC MODEL • PAL MODEL SCD-5083N SCD-5083P ■ MODEL DESCRIPTION • SCD-5083X SIGNAL SYSTEM • SIGNAL SYSTEM...
-
Page 4: Safety Information
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. - Page 5 If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
-
Page 6: Fcc Statement
safety information fCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. -
Page 7: Important Safety Instructions
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents... -
Page 8: Table Of Contents
contents inTroDuCTion Features Components and Accessories Component names and functions insTallaTion Before installation Installation Adjusting the monitoring direction for the camera ConnECTion Connecting to Monitor Connecting to Power Using Coaxial Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension _ contents... -
Page 9: Introduction
Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved. ssnr4 (samsung super noise reduction) function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place. -
Page 10: Components And Accessories
- English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese ComPonEnTs anD aCCEssoriEs Check if the following items are included in the product package. Quick Manual SCD-5083 SCD-5083 Quick Manual Screws Video Output Cable... -
Page 11: Component Names And Functions
ComPonEnT namEs anD funCTions ➍ ⓬ ⓫ ❿ Dome Cover shield Case rotate base : control rotating angle of camera. Vari-focal lens module : 2.8 ~ 10.5mm (F1.2). ➍ function setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. -
Page 12: Installation
Installation bEforE insTallaTion Ensure you read out the following instructions before installing the camera: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. ... - Page 13 installation Attach the installation template to the selected area and punch 2 holes as shown in the figure. Use the 2 supplied screws to fix the camera to the 2 punched holes. Set the <TOP FRONT> mark FRONT imprinted on the camera to face the direction of camera monitoring.
-
Page 14: Adjusting The Monitoring
Installation aDJusTing ThE moniToring DirECTion for ThE CamEra FRONT Tilt Lens rotation Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. -
Page 15: Connection
ConnECTing To moniTor Connect the Video OUT port on the rear panel of the camera to a monitor. Monitor SCD-5083 As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. -
Page 16: Using Coaxial Communications
connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 As shown in the table above, voltage decreases as the wire gets longer. ... - Page 17 Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Recommended Cable Distance Specification 300m...
-
Page 18: Menu Setup
camera operation mEnu ConfiguraTion main sETuP ● BASIC ● DAY/NIGHT ● BACKLIGHT PROFILE INDOOR USER ● ● ● SSDR ● ● OUTDOOR INDOOR ● ● ● WHITE BAL ● AWC SET MANUAL MERCURY ● ● ● BRIGHTNESS ● LENS ●... - Page 19 MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE Press the Function Setup switch. Main SETUP menu is displayed on the monitor screen.
- Page 20 If you select the traffic monitoring mode, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
- Page 21 White bal (White balance) Use the White Balance function to adjust the screen color. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’ . ▶...
- Page 22 camera operation ExPosurE When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. Select a desired mode using the EXPOSURE SETUP Function Setup switch. ▶ BRIGHTNESS ---- ---- brighTnEss : Adjusts the video ...
- Page 23 baCKlighT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. Select a desired mode using the Function Setup switch depending on the camera purpose.
- Page 24 camera operation WDr : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. LEVEL : Select one from low, WDR SETUP med, high to adjust the LEVEL MIDDLE ▶ 1. brightness of the WDR RETURN setup.
- Page 25 sPECial When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. Select a desired mode using the SPECIAL SETUP Function Setup switch. DISPLAY ▶ 1. DisPlaY COMM ADJ IMAGE ADJ ❶...
-
Page 26: Image Adj
camera operation FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) LANGUAGE : You can select the menu language according to your requirements. RETURN : Return to the SPECIAL menu. Comm aDJ (Communication adjustment) : ... - Page 27 DaY/nighT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. ❷ Select a desired mode using the Function Setup switch according to the picture display you want.
- Page 28 camera operation EXTERN : Ground to the grounding terminal to allow automatic switching between COLOR and B/W (Black/White). COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. DEfog : Y ou can use the defog mode to allow the camera to automatically ...
-
Page 29: Video Analytics
SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area. RETURN : Return to the SPECIAL menu. Dis (Digital image stabilizer) : T his function mitigates any picture movement due to external factors such as wind. ViDEo analYTiCs ... - Page 30 camera operation MOTION : This product MOTION DET generates signals DET. SIZE ▶ each time an object DET. AREA movement is detected NON DET. AREA in the four areas of 4. INDICATOR the screen so efficient ALARM OUT monitoring can be RETURN achieved.
- Page 31 INTELLIGENCE : Set the intelligent INTELLIGENCE video detection SENSITIVITY ▶ ---- ---- function. DET. SIZE SENSITIVITY : Set the sensitivity 3. FENCE of the motion 4. APPEAR detection. When 5. INDICATOR you adjust the ALARM OUT higher level, the RETURN more sensitive.
- Page 32 camera operation 2) AREA FENCE SEL POS : Selects a AREA FENCE position from SEL POS ▶ POS1 POS1 ~ POS4. X POS ------ X POS / Y POS : Adjust Y POS ------ the size and position of the DIRECTION selected area fence.
- Page 33 If the camera shoots an object a short distance away, the video analysis function can be degraded. In the following cases, motion detection or video analysis event performance can be degraded or malfunctions can occur. - If an object’s brightness or color is similar to that of the background - If there is little movement near the screen edge - If multiple movements keeps occurring randomly, such as scene switching or sudden light changes...
- Page 34 troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. Check that the power cord and line connection between the ...
- Page 35 specifications sPECifiCaTions sCD-5083n sCD-5083P Video Imaging Device 1/3” 1.3M CMOS 1312(H) x 1069(V) Total Pixels 1305(H) x 1049(V) Effective Pixels Progressive Scan Scanning System Internal Synchronization Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Color:1000TVL Horizontal Resolution B/W:1000TVL...
- Page 36 specifications sCD-5083n sCD-5083P SSDR ( Off / On ) Contrast Enhancement Digital Noise Reduction SSNR 4 ( Off / On ) Defog AUTO / MANUAL / OFF Purple Fringe Reduction Purple Fringe Reduction ( Off / Low / Middle / High) Digital Image Stabilization Off / On Tampering Off / On...
-
Page 37: Dimension
DimEnsion Unit: mm English_3... - Page 38 MEMO...
- Page 39 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660...