Web Operation; Network Connection; Login And Main Interface - WatchNet MPIX Series User Manual

5 Web Operation

These series network camera products support the Web access and management via PC.
Web includes several modules: Monitor channel preview, system configuration, alarm and etc.

5.1 Network Connection

Please follow the steps listed below for network connection.

Make sure the network camera has connected to the network properly.

Please set the IP address, subnet mask and gateway of the PC and the network camera
respectively. Network camera default IP address is 192.168.1.108. Subnet mask is 255.255.255.0.
Gateway is 192.168.1.1

Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.

5.2 Login and Main Interface

Open IE and input network camera address in the address bar.
For example, if your camera IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 5-1.
The login interface is shown as below. See Figure 5-2.
Please input your user name and password.
Default factory name is admin and password is 1234.
Figure 5-1
Input your IP
address here
27