Removing the Processor
1.
Follow the procedures in
2.
Remove the:
a.
hard drive
b.
cover
3.
Perform the following steps as shown in the illustration:
a. Press the release lever down [1].
b. Move the lever outward to release it from the retention hook that secures it [2].
c. Lift the processor cover and remove the processor from its socket [3].
Installing the Processor
1.
Insert the processor into the processor socket. Ensure that the processor is properly seated.
2.
Press the release lever down and then move it inward to secure it with the retention hook.
3.
Install the:
a.
hard drive
b.
cover
4.
Follow the procedures in
Removing the Memory
1.
Follow the procedures in
2.
Remove the:
a.
cover
b.
processor fan module
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
32
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Need help?
Do you have a question about the OptiPlex 3020M and is the answer not in the manual?
Questions and answers