Using Your Kettle; Before First Use; Removing The Filter - Morphy Richards Accent User Manual

102002 rev3.qxp_Layout 1 23/01/2015 10:01 Page 5

Using your kettle

Fill the kettle with water through either the Spout
(4) or Lid (3), do not fill past the MAX line.
When boiled, the kettle will automatically
switch off. Remove from the Cordless Base.

Before first use

Before using the appliance for the first time, fill
with water, boil and pour away.
1
Place the kettle on the Cordless Base
press the On/Off Switch (6).
3
Pour the water from the kettle.
WARNING: When boiled, allow a few
seconds before pouring.

Removing the Filter

1.
Open the Lid (3).
2.
Lift the Filter (10)
3.
To refit the Filter, slide it into the side wall guides
of the filter holder until it clicks into place.
WARNING: Unless the filter is fitted correctly,
the kettle lid may not close and lock securely.
(8) and
upwards from its holder.
2
4
3