Primergy bx920 s4 server blade upgrade and maintenance manual (266 pages)
Summary of Contents for Fujitsu Primergy BX900
Page 1
System Message Guide PRIMERGY BX900/BX400 Blade Server Systems Ethernet Connection Blade Module SB6 / SB11a / SB11 Switch and IBP Version English...
Page 3
PRIMERGY BX400/BX900 Connection Blades Ethernet Connection Blades PY CB Eth Switch/IBP 1 GB 18/6 (SB6) PY CB Eth Switch/IBP 1 GB 36/12 (SB11a) PY CB Eth Switch/IBP 1 GB 36/8+2 (SB11) System Message Guide Switch and IBP version Edition Jan 2012...
System Message Overview This guide describes the PRIMERGY BX900 Ethernet Connection Blade specific system messages that you might encounter. Basically, the guide does not describe how to install your connection blade or how to configure software features on your switch. It also provide detailed information about commands that have been created or changed for use by the connection blade.
Page 11
Message that appears during debugging only. Table 1-2 Message Severity Levels All syslog messages generated by a PRIMERGY BX900 switch other than the master switch are displayed ending with (Switch-x) where Switch is the ip address of stack master and x is the unit number of the stack member generating the message.
Message and Recovery Procedures This chapter describes the PRIMERGY BX900 switch system messages in alphabetical order by facility. Within each facility, the messages are listed by severity levels 0 to 7: 0 is the highest severity level and 7 is the lowest severity level. Each message is followed by an explanation and a recommended action.