Safety Instructions - Sungrow SG10KTL User Manual

1 Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS
The SG10KTL, SG12KTL, SG15KTL and SG20KTL have been designed and tested
strictly according to the international safety regulations. As electrical and electronic
equipment, safety instructions related to them must be complied with during
installation, commissioning, operation and maintenance. Incorrect operation or
work may result in damage to:
The life and well-being of the operator or a third party
The inverter and other properties that belong to the operator or a third party
Therefore, the following general safety instructions must be read and always kept in
mind prior to any work. All detailed work-related safety warnings and notes will be
specified at the critical points in corresponding chapter.
All installation and electrical work must only be performed by qualified
personnel. They have
been trained specially;
already completely read through and understood the manual and other
related documents;
been familiar with safety requirements for electrical system.
Technical personnel mentioned above may perform the following work:
Install the inverter onto the wall
Connect the inverter into the PV power system
Connect other devices into the PV power system
Commission the inverter
Maintain and service the inverter
1