Getting Started; Insert Batteries On The Remote Control Unit - Motorola SCOUTTRAINER25 User Manual

2. Getting Started

2.1

Insert Batteries on the Remote Control Unit

The Remote Control Unit uses 2x AAA-sized alkaline batteries.
Small cross-head
or flat end
screwdriver.
1. Use a small cross-head or flat end screwdriver to unscrew the battery
compartment cover as shown above.
2. Fit the batteries into the compartment in the correct polarity as shown
below.
3. Close the battery compartment cover and gently tighten the screw in a
clockwise direction using a small cross-head or flat end screwdriver.
4. Press and hold the POWER KEY
on or off.
Getting Started
+
+
to power the Remote Control Unit
9