Hp V1910-24G-Poe (365W) Switch Je007A; Front Panel; Rear Panel; Power Supply System - HP V1910 Series Getting Started Manual

HP V1910-24G-PoE (365W) Switch JE007A

Front panel

Figure 9 HP V1910-24G-PoE (365W) Switch JE007A front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(3) RPS status LED (RPS)
(5) Power LED (Power)
(7) Console port

Rear panel

Figure 10 HP V1910-24G-PoE (365W) Switch JE007A rear panel
(1) DC power receptacle
(3) AC receptacle

Power supply system

The HP V1910-24G-PoE (365W) Switch JE007A can adopt AC power input, or DC power input, or both
to provide backup
 AC power input:
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60 Hz
Input voltage range: 90 VAC to 264 VAC, 47 Hz or 63 Hz
DC power input

Rated voltage range: –52 VDC to –55 VDC
CAUTION:
Only the RPS recommended by HP can be used for the HP V1910-24G-PoE (365W) Switch JE007A. The
–48 VDC power supply in the equipment room cannot be used directly. Otherwise, the switch may be
damaged.
1 2 3
(2) Port status LED mode switching button
(4) Port status LED
(6) Port mode LED
(8) Port 1000Base-X SFP interface
4
(2) Screw hole of the plug
(4) Grounding screw
6