Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Matrix MR111
Summary of Contents for Matrix MR111
- Page 1 MR111 Range Cooker Manual for Installation, Use and Maintenance GB, IE...
- Page 2 Important This appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may lead to premature failure of the appliance. The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product.
-
Page 3: User Information
User information: Read the instructions carefully before using the cooker. Keep the instructions in a safe place for future reference. Follow the instructions for first use (page 4). Always use oven gloves when removing shelves and trays from the cooker. Always grill with the door closed. -
Page 4: Before First Use
Before first use • Before using the oven for the first time we recommend that you clean the oven with soapy water, rinse carefully dry thoroughly, and then heat at maximum temperature on the grill function for 15 minutes and the fan oven function for one hour. -
Page 5: Using Your Hob
Using your hob Gas burners: 1. Left Rapid 3.0kW 2. Left Semi-rapid 1.75kW 3. Triple-ring/Wok 3.7kW 4. Right Semi-rapid 1.75kW 5. Right Rapid 3.0kW Control panel: 6. Timer control 7. Front left rapid burner control 8. Rear left semi-rapid burner control 9. -
Page 6: Igniting The Burners
Igniting the Burners The hob is fitted with a flame failure device. Flame failure devices operate by shutting off the supply of gas to the burner in the event that the flame is extinguished accidentally. To ignite the burners, follow these instructions: 1. - Page 7 Correct use of the Wok Pan Adaptor The wok pan adaptor is a special stand that is designed to be fitted over the triple ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the triple ring burner as shown in Fig.5.
- Page 8 Oven controls and use Cooking function knob To set the function, turn the cooking function knob clockwise to the required function. Each of the oven functions uses different elements within the oven to offer you the best choice of cooking every time. These are explained below: Oven Light This function switches on the oven light without using any heating elements to illuminate the oven cavity.
- Page 9 Temperature knob • To set the temperature, turn the temperature knob clockwise to the required temperature. • Once the oven has reached the required temperature, the temperature indicator lamp on the control panel will switch off. • The temperature indicator lamp will light up when the oven elements are working. Timer knob The oven is equipped with a cut off timer to switch off the oven after a preset time of up to 120 minutes.
-
Page 10: Care And Maintenance
Care and Maintenance Cleaning the Cooker IMPORTANT: Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance. You should always allow the cooker to cool fully after use before undertaking any cleaning or maintenance. • Steam cleaners must not be used when cleaning this appliance •... - Page 11 Cleaning the oven interior To clean the oven interior, suitable proprietary chemical cleaners may be used after first consulting with the manufacturer’s recommendations and testing a small sample on the oven cavity. Do not use metal scrapers or harsh cleaners on the oven door glass. These could cause scratches, which may result in the glass shattering.
-
Page 12: Removing The Oven Door
Removing the Oven Door The oven door can easily be removed as follows: • Open the door to the full extent (fig. 10) • Open the lever A completely on the left and right hinge see (fig. 11) • Hold the door as shown in fig. 14 Fig. -
Page 13: Control Knobs
Care and Maintenance Flexible gas pipe Check the flexible gas pipe connecting the gas supply to the cooker regularly. It must be always in perfect condition; in case of damage contact Customer Care for advice. Control knobs Should any of the control knobs become stiff, do not use force. Contact Customer Care for advice. Changing the oven light 1. -
Page 14: Installation Section
Installation section The manufacturer will not be held responsible for any damage to property or injury to persons/animals resulting from incorrect installation of this appliance. We recommend you seek the help of another individual when installing this appliance to prevent damage or injury. - Page 15 Notes: • Do not position this appliance adjacent to a refrigeration unit. The heat generated may cause the refrigeration unit to fail. • This appliance is designed to be installed adjacent to cabinet units capable of withstanding temperatures of 65°C or greater above ambient temperature.
- Page 16 Electricity supply to your oven Warning! This appliance must be earthed. This appliance must be connected by a competent person, using fixed wiring via a double pole switched fused spur outlet. We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C.
-
Page 17: Gas Supply Requirements
Gas Supply Requirements IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED PERSON. • This installation must comply with the Gas Safety (installation and use) Regulations 1984. • This appliance is category II2H3+ and is designed for use in the UK and Ireland. The installation must comply with the Gas Safety (installation and use) Regulations 1984. -
Page 18: Natural Gas To Lpg Conversion
Natural Gas to LPG conversion This appliance can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar, or butane operation at a nominal inlet pressure of 28/30mbar. This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). - Page 19 Setting up the Range Cooker for Use Regulation of the hob burner minimum flow rates 1. Natural gas Light the burner and turn it to the minimum position. Remove the gas control knob and turn the adjustment screw at the side of the valve shaft until the required minimum flame is achieved.
- Page 20 Serviced by To contact our Customer Care Department, or for Service, please contact us on the details below. Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
Need help?
Do you have a question about the MR111 and is the answer not in the manual?
Questions and answers