Advertisement
Advertisement
Table of Contents
Related Manuals for Bilt DWO-3
Summary of Contents for Bilt DWO-3
- Page 1 DWO-3 Bluetooth Helmet Headset...
-
Page 2: Contents Of Retail Box
Bluetooth device). - MP3 connectivity (Bluetooth compatible version). COMPATIBILITY WITH YOUR HELMET The BiLT™ Bluetooth helmet headset is easy to install inside the helmet. When buying your headset or your helmet, please ask your dealer for compatibility of both. Note: The use of two speakers may be illegal in certain countries. Please check the local regulations... -
Page 3: Functions
- Please use the USB cable gently, do not pull it too hard or the headset may be damaged. The BiLT™ Bluetooth helmet headset is a water-resistant device, designed - In order to keep the battery capacity and extend it’s life, please store the for use under moderate rain or snow conditions. -
Page 4: Installation
Blue and Red blue LED indicators flash alternately, - Fit the velcro tabs into the cut-out on the above BiLT™ helmet, or where the headsets are on pairing mode (the Bluetooth headset can be searched applicable on other helmets then attach the speaker to the velcro tab (note: short and paired only when it is on pairing mode). -
Page 5: Intercom Operation
Bluetooth Helmet Headset OPERATION INTERCOM OPERATION 1. Pairing Intercom Headsets Note: 1. Some mobile phones don't need to input pairing password, because it can automatically complete the pairing 1.1 Please press and hold Button 1 until Red/Blue lights flashes alternately to process. -
Page 6: Specifications
Bluetooth Helmet Headset OPERATION SPECIFICATIONS MUSIC OPERATION DWO - 3 Please refer to the devices user manual first. 1 PLAY / PAUSE Under Bluetooth A2DP music play state, short press the button 2 to play or pause the music. 2 TRACK FORWARD Right twist button 2 to forward track. -
Page 7: Troubleshooting
> Increase the separation between the equipment and receiver. guarantee that the BiLT™ Bluetooth helmet headset can connect with all types > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Page 8 Bluetooth Helmet Headset...
Need help?
Do you have a question about the DWO-3 and is the answer not in the manual?
Questions and answers
How do I unpair the helmet from an old phone
To unpair the Bilt DWO-3 helmet from an old phone, turn off the Bluetooth headset, then pair it again with a new device. During pairing, ensure the headset and the mobile phone are within 1 meter. Press and hold Button 1 on the Bluetooth helmet headset for about 8 seconds until the blue and red LEDs flash alternately. This puts the headset into pairing mode, allowing it to connect to a new device, effectively replacing the old pairing.
This answer is automatically generated
How do I know how much charge is left on my helmet
To check the battery charge level on your Bilt DWO-3 helmet:
- A red LED flashing once every 3 seconds indicates charging is in progress.
- A red LED shining steadily means charging is complete.
- A red LED flashing twice every 60 minutes signals the battery is low.
- A blue light flashing every 3 seconds indicates the headset is in a connected state and fully charged.
This answer is automatically generated