Kobalt KM2040X-06 User Manual page 17

20 in., 40 v lithium-ion dual blade mower
Table of Contents

Advertisement

OPERATING INSTRUCTIONS
Mulching tips
Note: Inspect the area where the mower is to be used and remove all stones, sticks, wire, bones, and
other debris that might be thrown by the rotating blade.
Release the switch to turn the mower OFF when crossing any graveled area (stones can be
thrown by the blade).
Set mower to the highest cutting height when mowing on uneven ground or in tall weeds.
For effective mulching, do not cut wet grass because it tends to stick to the underside of the deck,
preventing proper mulching of grass clippings. New or thick grass may require a narrower cut. The
ground speed should be adjusted to the condition of the lawn. If mowing has been delayed and the
grass has been allowed to grow longer than 4 in. (10 cm), mow the lawn twice in order to reduce
the grass height to a maximum of 3-1/4 in. (8.3 cm).
Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the grass gets
too long, start at the highest cutting position and work down to the desired cutting height.
WARNING
If you strike a foreign object, stop the motor and remove the battery. Thoroughly inspect the mower
for any damage. Repair any damage before operating the mower. Excessive vibration of the mower
during operation is an indication of damage. Thoroughly inspect the mower and repair any damage
before operating the mower.
3. Emptying the grass catcher bag
• Stop the mower and allow blades to completely stop.
Lift the rear discharge cover.
Lift the grass catcher by its handle to remove from
mower.
Empty grass clippings.
Lift the rear discharge cover and reinstall the grass
catcher as described earlier in this manual.
Note: When you start the mower, the full bag indicator
of the grass catcher will lift up. Once the grass catcher
is full, the full bag indicator will fall. So the grass
catcher bag needs to be emptied.
Replacing the cutting blade
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or
other materials when performing any maintenance on the blades. Always remove the battery when
servicing or transporting the mower.
3
kobalttools.com
17
Full bag
indicator

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KM2040X-06 and is the answer not in the manual?

Questions and answers

Bill Boswell
April 4, 2025

Mowers starts then stops after 5-10 seconds - Red light under the battery cover comes on.

1 comments:
Mr. Anderson
April 4, 2025

The Kobalt KM2040X-06 mower may start and then stop after 5–10 seconds with a red light under the battery cover due to the battery not being fully seated and secure in the battery port. Ensure the battery clicks into place and the latch snaps to avoid power interruption.

This answer is automatically generated

Tom Redlinger
April 12, 2025

What is the amount of horsepower on a 40 V self propelled 6 Amp Kolbolt mower?

1 comments:
Mr. Anderson
April 12, 2025

The horsepower of the Kobalt KM2040X-06 40V self-propelled mower is not provided in the available information.

This answer is automatically generated

Dorothy Davis
April 27, 2025

blade won't turn

Table of Contents

Save PDF