Appendices; Specifications; General - Sony PMW-100 Operating Instructions Manual

Appendices

Specifications

General

Mass
Camcorder only: approx. 1.5 kg
(3 lb 4.9 oz)
With lens hood (1), eyecup (1), battery
pack BP-U30 (1), SxS memory card
(1): approx. 1.8 kg (3 lb 15 oz)
Dimensions
Approx. W167 mm × H164 mm ×
5
D335 mm (6 /
(Outermost dimensions. Depth is the
length from the tip of a front
microphone to an EVF eyecup.)
Approx. W167 mm × H164 mm ×
5
D278 mm (6 /
(Not including extruding parts. Depth
is the length from the tip of a front
microphone to the back of the unit.)
Power requirements
DC 12 V (11.0 V ~ 17.0 V)
Power consumption
Approx. 12 W (while recording with
LCD Off, EVF On and I/O Select Off)
Approx. 14 W (while recording with
LCD On, EVF On and I/O Select HD
SDI & HD HDMI)
Inrush current
(1) Maximum possible inrush current at
initial switch-on (Voltage changes
caused by manual switching): 50 A
peak, 9.5 A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds (Voltage
changes caused at zero-crossing): 3 A
peak, 0.7 A r.m.s. (240V AC)
Operating temperature
0°C ~ +40°C
1 1
× 6 / × 13 / inches)
8 2 4
1 1
× 6 / × 11 / inches)
8 2 8
Storage temperature
–20°C ~ +60°C
Continuous operation time
(While recording with LCD Off, EVF
On and I/O Select Off)
With battery pack BP-U90: approx. 6
hours
With battery pack BP-U60: approx. 4
hours
With battery pack BP-U30: approx. 2
hours
Recording format (video)
UDF
HD422 mode: MPEG-2 422P@HL,
50Mbps / CBR
HD420 mode: MPEG-2 MP@HL,
35Mbps / VBR
DVCAM mode: DVCAM
FAT
HQ 1920 mode: MPEG-2 MP@HL,
35Mbps / VBR
HQ 1440 mode: MPEG-2 MP@HL,
35Mbps / VBR
HQ 1280 mode: MPEG-2 MP@HL,
35Mbps / VBR
SP 1440 mode: MPEG-2 MP@H-14,
25 Mbps / CBR
DVCAM mode: DVCAM
Recording format (audio)
UDF
HD422 mode: LPCM (24-bit, 48 kHz, 4
channels)
Other modes: LPCM (16-bit, 48 kHz, 4
channels)
FAT
HD Mode: LPCM (16-bit, 48 kHz, 4
channels)
SD Mode: LPCM (16-bit, 48 kHz, 2
channels)
Recording frame rate
UDF
HD422 mode: MPEG-2 422P@HL,
50Mbps / CBR
Specifications 25