Mrp40 (Morse Code) - West Mountain Radio RIGblaster Advantage User Manual

MRP40
Although there are free CW (Morse Code) decoding programs the
performance of many leave a lot to be desired. MRP40 by Norbert Pieper is
an excellent CW decoder, even under weak signal conditions & QSB.
It supports transmission of Morse Code from the PC keyboard using the
CW/FSK jack on the RIGblaster Advantage.
A 30 day trial version of the software is available to download from:
http://www.polar-electric.com/
Configuration is simple. It will require the optional CW keying cable
(SKU 58120-984 - or use a stereo 1/8" to stereo 1/4" patch cable) to be
connected between the RIGblaster Advantage CW/FSK jack and the
transceiver's CW keying jack. Select CW mode on the transceiver.
Complete the following steps to configure MRP40 with the RIGblaster
Advantage:
1. Choose "Options" on the MRP40 window.
2. Move the mouse cursor to "Show..." and then choose Soundcard..."
3. Assign "RIGBlaster Advantage Audio" in each of the RX and TX drop-
down boxes.
4. Enter the preferred sidetone frequency. As we will be using your
transceiver's CW mode this should match the sidetone frequency.
32
West Mountain Radio Operating Manual