INTRODUCTION Congratulations on your purchase and welcome to the finest line of suspension bikes available! About Off Road, Stunt, Downhill and Freeriding This manual is designed to be used in conjunction with the Bicycle Owner’s Manual and owner’s manuals supplied by the manufacturer of the front and rear suspension components.
As activities such as racing, jumping, severe off road riding, and stunt riding are extremely dangerous, SAFETY should always be the first consideration. Don’t ride in the race, ride hard off road, try the jump, or do the stunt, UNLESS YOU CAN DO SO SAFELY.
FORK SETUP INFORMATION WARNING! SX and SX Trail frames are compatible ONLY with single crown forks that have travel of 7.1” (180mm) or less. Use of different styled forks or forks with longer travel may result in catastrophic failure of the frame which may result in serious personal injury or death.
DOWN TUBE CABLE GUIDE INSTALLATION Specialized SX Trail frames are equipped with bolt-on down tube cable guides. For proper housing placement and function, the hydraulic rear brake housing goes in the larger middle slot, the gear cables go on the outside (Fig. 1).
Stand Over height is measured vertically at the centerpoint of the TT measurement. Headset: 1 1/8” top, 1.5” bottom Derailleur Hanger: 9895-4020 Seatpost diameter: 30.9mm SX Trail Eye to Eye: 216mm (8.5”) Front derailleur clamp: E-Type Direct Mount (DMD) SX Trail Shock Stroke: 63.5mm (2.5”) Seat Collar: 34.9mm SX Eye to Eye: 190.5mm (7.5”)
COIL SPRING RATE SPECIFICATIONS BIKE MODEL SMALL MEDIUM LARGE SX TRAIL II / I NOTE: SX Frames use a Fox RP23 air shock, providing 100mm of travel. Please refer to the setup steps from Fox Racing Shox.
The Specialized Derailleur guard is available separately through your Specialized authorized dealer. The guard works with solid or Q/R axle types and is compatible with all Mountain bike models using the Rev2 Alloy Mtn Derailleur Hanger (SX framesets). Guard Part#...
FRAME SCHEMATIC NOTE - Bearing and Bolt Kits are available only through your Specialized authorized dealer. To retain your warranty and for your safety, all maintenance should be performed by your Specialized authorized dealer.
SETUP DATA DATE RIDER WEIGHT FORK PSI FORK REBOUND DAMPING (# of clicks from full slow) FORK COMPRESSION DAMPING (# of clicks from full firm) SHOCK PSI SHOCK REBOUND DAMPING (# of clicks from full slow) SHOCK COMPRESSION DAMPING (# of clicks from full firm)
Page 16
SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 www.specialized.com...
Need help?
Do you have a question about the SX and is the answer not in the manual?
Questions and answers