Wiring Connection - Kenwood KDC-262U Instruction Manual

Wiring connection

/
Front output
Rear/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
/ :
Fuse (10 A)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Brown
Gray/Black (Mute control wire)
Green
Green/Black
Purple
Blue/White
Purple/Black
(Power control wire/
Antenna control wire)
Red
(Ignition wire)
Yellow Light blue/yellow
(Battery wire) (Steering remote
control wire)
/ / /
:
Rear/ subwoofer output
To the terminal that is grounded when the
telephone rings or during conversation
( 14)
(To connect the Kenwood navigation system,
refer your navigation manual.)
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter
Part list for installation
When connecting to
an external amplifier,
connect its ground wire
(A) Faceplate
to the car's chassis to
avoid damaging the
unit.
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
17
ENGLISH