Advertisement
Quick Links
Advertisement
Related Manuals for Specialised Welding Products MIG 160
Summary of Contents for Specialised Welding Products MIG 160
- Page 1 INSTRUCTION MANUAL MIG 160 / MIG 200 / MIG 300 / MIG 300S...
-
Page 2: Table Of Contents
9-10 eC deCLARATION OF CONFORMITy Trakis Nagykoros Kft declares that the following machines: Classic MIG 160 / 200 / 300 / 300S blue brand MIG 160 / 200 / 300 /300S correspond to the following edicts and standards: MSZ eN 60974-1:2006... - Page 3 wARNING Fume welding vaporises metals, and anything that is resting on the surface. This gives rise to fume, which is condensed find particulate material. The fume is mostly oxides of the metals, including any alloying elements, but it also contains gases produced in the arc, such as ozone or oxides of nitrogen, and decomposition products from any paints or coating which was on the metal surface.
-
Page 4: Installation
INSTALLATION electrical Connection The migs comprise of three models, all single phase. Always ensure the machine is connected to the correct supply, with the correct size of fuses or circuit breakers as shown below. If circuit breakers are used they must be type four otherwise tripping may occur although there is no machine fault. -
Page 5: Operation
OpeRATION Controls On/Off Switch Is the illuminated rocker switch which lights up red when the machine is switched on. Voltage Control 160 has six voltage settings 1 being the lowest. Switch 200 has eight voltage settings 1 being the lowest. Voltage Control 300 / 300S the left-hand switch has two settings which alters Switch voltage output in large steps, the right-hand switch has eight... -
Page 6: Welding Parameters
Model MIG 160 MIG 200 MIG 300 / 300S wF2/ 4F2 Input 230v/50-60hz 230v/50-60hz 230v/50-60hz Output 140A 200A 315A 150A 250A 120A 200A 100% 150A Voltage Steps wire Size 0.6 - 0.8 mm 0.6-1.0 mm 0.6 - 1.2 mm 0.6 - 1.2 mm... -
Page 7: Troubleshooting
TROUbLeShOOTING FAULT ReASON ReMedy Set is dead 1. On/Off switch is off Turn it on 2. Fuse in mains supply blown Replace fuse Nothing happens when 1. Torch switch defective Check for torch fault by shorting the torch trigger is pressed 2. -
Page 8: Spare Parts List
SpARe pARTS LIST TRAKIS pART NUMbeR deSCRIpTION MAChINe w 9391 potentiometer 10 KA 300 / 4F2 w 9392 potentiometer 10 Kb 160 / 200 w 9393 potentiometer 470 KA 300 / 4F2 w 9394 ON/OFF switch 160 / 200 / 300 / 300S w 9395 Reel hub Assembly TRAKIS 160 / 200 / 300 / 4F2... -
Page 9: Torch Consumable List
TORCh CONSUMAbLe LIST Swp 15 MIG TORCh & ACCeSSORIeS 6567 6007 6020 6009 6033 Swp 15 MIG TORCh COde deSCRIpTION 6000 Swp 15 x 3 mtr Mig Torch - 002.0449 6001 Swp 15 x 4 mtr Mig Torch - 002.0450 SwAN NeCKS 6033 Swan Neck - 002.0009... - Page 10 TORCh CONSUMAbLe LIST (CONTINUed) Swp 25 MIG TORCh & ACCeSSORIeS 6023 6568 6010 6569 6011 6034 6021 6012 6570 Swp 25 MIG TORCh COde deSCRIpTION 6002 Swp 25 x 3 mtr Mig Torch - 004.0312 6003 Swp 25 x 4 mtr Mig Torch - 004.0313 6598 Swp 25 x 5 mtr Mig Torch - 004.0314 SwAN NeCKS...
- Page 11 Specialised welding products Ltd 14 Farringdon Industrial Centre Farringdon, Nr Alton hampshire GU34 3dp...
Need help?
Do you have a question about the MIG 160 and is the answer not in the manual?
Questions and answers