Servo Installation; Horizontal Stabilizer Installa- Tion - Black Horse Model Extra 300S Instruction Manual Book

SERVO INSTALLATION.

1) Install the rubber grommets and brass
eyelets onto the rudder and elevator servo.
2) Install the metal connector onto servo
arm.
3) Using a modeling knife, remove the
covering at servo tray and at fuselage slot.
Remove covering.
4) Drill 1,6mm pilot holes through the block
of wood for each of the mounting screws
provided with the servo.
8
EXTRA 300S.
Right size.
Repeat the procedure for the other
servo.
HORIZONTAL STABILIZER INSTALLA-
1) Using a modeling knife, carefully re-
move the covering from over the vertical sta-
bilizer mounting slot in the top of the fuselage.
2) Draw a center line onto the horizontal
stabilizer. Then slide the horizont al into the
fuselage.
Left size.
TION.
Remove covering.