Description Of The Control Panel - Toshiba 3560 Operator's Manual

2. DESCRIPTION OF THE CONTROL PANEL

TOTAL COUNTER Display
The total number of copies made after the
copier was installed is shown here.
CLIP TRAY
Put paper clips removed from the originals
here for safe keeping.
TIMER Lamp (
This lamp lights if the timer has been set.
During the OFF (auto-shutoff) period, you
can turn on the copier by pressing PRINT key
to make copies.
ENERGY SAVER
When the copier is not used for a fairly long
period of time such as during lunch time,
press this key and the copier will go into the
energy-saving mode, turning all its display
lamps off. To resume copying, press this key
again. After about 30 seconds, the copier will
become ready for copying.
INTERRUPT
When you want to make a copy of a different
original during a multicopy run, press this
key. During interrupt copying, copies can be
made only one by one. To return to the
previous multicopying run, press this key
again.
12
page 90)
Key
Key ( page 42)
8 8 8 8 8 0 0
MESSAGE Display (
The status of the machine, operation proce-
dure and various instructions to the user are
shown in pictorials and text.
INFO Key
Use the key to display the appropriate opera-
tion procedure and to answer the questions
from the copier. The key is also used for other
purposes.
FUNCTION CLEAR
When you press this key, all the modes you
have selected will be cleared to the standard
status.
ZOOM / /
Pressing the key decreases the repro-
duction ratio to 50% at increments of 1%.
Pressing the key increases it to 200%.
Pressing the key will return to the
actual-size (100%) mode.
ORIGINAL SIZE
Use these keys to set the size of the original.
When an original size is set with the paper
size already selected, the correct reproduc-
tion radio will automatically be calculated and
shown on the message display.
page 14)
Key( page 21/46)
Keys ( page 41)
Keys ( page 40)