Advertisement
Model Numbers: CL-30P-DDF, CL-20F-DDF,
IMPORTANT: Read and understand all of the directions in this manual before assembling,
starting, or servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for
future reference.
For ventilating use only. Do not use to exhaust hazardous chemicals or use near
WARNING
any flammable liquids or gases as sparks from motor may ignite fumes. Never use
the fan in spaces which contain products such as gasoline, solvents, paint thinners, dust particles,
volatile or airborne combustibles, or any unknown chemicals.
This product meets and exceeds the requirements of OSHA 1910.212(a)(5), the standard which
regulates electric fan blade safety, and is certified under UL# E234000, established and made
effective April 10, 2003, and updated March 23, 2005, by Underwriters Laboratories, Inc
Please note the serial number of your fan, and write it on the back of this User's Manual for future reference.
Distributed by: TRACTOR SUPPLY COMPANY 200 POWELL PLACE
CL-24O-DDF, CL-30-DDF
READ AND SAVE THESE INSTRUCTIONS
BRENTWOOD, TN 37027
For customer support, call: 1-866-641-4540
User's Manual and
Operating Instructions
.
950450280-12
Advertisement
Table of Contents
Related Manuals for CountyLine CL-30P-DDF
Summary of Contents for CountyLine CL-30P-DDF
- Page 1 User’s Manual and Operating Instructions Model Numbers: CL-30P-DDF, CL-20F-DDF, CL-24O-DDF, CL-30-DDF READ AND SAVE THESE INSTRUCTIONS IMPORTANT: Read and understand all of the directions in this manual before assembling, starting, or servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for future reference.
-
Page 2: Table Of Contents
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE Table of Contents Safety Information..........2 30” Drum Fan..........8-10 20” Floor Fan............3 Troubleshooting..........11 24” Barrel Fan..........4-5 Warranty........... Back Cover 30” Pedestal Fan..........6-7 Safety Information IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY, SERVICE OR USE OF THIS FAN. -
Page 3: 20" Floor Fan
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 20” FLOOR FAN Installation and Assembly (requires Phillips head screwdriver) If the Wall Mount Kit is applied, the 2. Slide Frame Support L and Frame Support R into WARNING Support Frame (Item 21) and line up holes for screw. -
Page 4: Exploded View And Parts List
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 24” BARREL FAN Installation and Assembly - Floor 1. Locate fan in safe, desired position on level ground, and connect to approved power source. Exploded View Figure 2: Exploded View of CL-24O-DDF Replacement Parts... - Page 5 NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 24” BARREL FAN Installation and Assembly - Wall Mount (requires flat head screwdriver) If the Wall Mount Kit is applied, the 1. Attach Wall Mount (item 17 on page 4) to wood stud as WARNING shown below.
-
Page 6: 30" Pedestal Fan
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” PEDESTAL FAN Installation and Assembly - Insert Tilt Adjustment Knob and tighten. REQUIRED TOOLS: 8. Remove 4 screws on motor, and attach the Rear Grille. Pliers Tighten screws only after all 4 screws are reattached to Knife... - Page 7 NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” PEDESTAL FAN Exploded View Figure 6: Exploded View of CL-30P-DDF Replacement Parts Item # Description Part Number Item # Description Part Number Logo Plate 95-043-0360 Latch Spring...
-
Page 8: 30" Drum Fan
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” FLOOR FAN -OPTIONAL CEILING MOUNT Exploded View Figure 7: Exploded View of CL-30-DDF Replacement Parts Item# Description Part Number Item# Description Part Number Front Guard 95-032-0140 Wheel Axle 95-008-0260... - Page 9 NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” FLOOR FAN -OPTIONAL CEILING MOUNT Floor Installation NOTE: This fan uses a folding wheel design. For quick assembly, simply swing the wheels out and snap to Simply locate fan in safe, desired position on level lock in place.
- Page 10 NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” FLOOR FAN -OPTIONAL CEILING MOUNT Ceiling Kit Exploded View Figure 10: Exploded View of CL-30-DDF (ceiling mount kit) Ceiling Kit Replacement Parts Item# Description Part Number Item# Description Part Number...
-
Page 11: Troubleshooting
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE Troubleshooting Guide Problem Possible Cause Corrective Action Fan does not operate 1. No power Inspect power cord for damage. Be sure unit is plugged in and turned on 2. -
Page 12: Warranty
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE If the manufacturer finds the item to be in normal operating condition, or 1 YEAR LIMITED WARRANTY not defective, the item will be returned freight collect. This Limited Warranty is in lieu of all other express warranties.
Need help?
Do you have a question about the CL-30P-DDF and is the answer not in the manual?
Questions and answers
My 30” pedestal fan runs for about 2 minutes and stops , what do I need to check
If the CountyLine CL-30P-DDF 30” pedestal fan runs for about 2 minutes and then stops, check the following:
1. Power supply – Ensure the fan is plugged in and the outlet is working.
2. Motor condition – A faulty motor may cause the fan to stop; consider replacing the motor.
3. Capacitor – A bad capacitor can cause startup or runtime issues; replace if needed.
4. Switch – A defective switch may interrupt power; inspect and replace if necessary.
5. Obstructions – Check for any blockage around the blades that may cause overheating or shutdown.
Always unplug the fan before inspection or maintenance.
This answer is automatically generated