Disassembly - Nikon SB-800 Repair Manual

FSA03501-R.3613.A

Disassembly

WARNING
警告
● Due to an internal high voltage area, be sure to discharge the main condenser before
removing covers according to the instructions of the repair manuals.
*Note:For dissembling/(re)assembling this product, lead-free solder is used except both ends of
Xe-tube on Page D8/A3.
Side Rubber
・ Remove right-and-left side rubbers.
・Discharge the main condenser at 2 holes under the side rubbers (#143) by using
discharging tool.
#144
#143
Cover (E) unit
・Take out each screw, and lift the cover (E) unit (#118) up slowly
in the direction indicated by the arrow.
＊ Note: Be careful not to cut off the inside wires.
#136×2
#161×2
・The battery lid comes off.
#118
Battery lid
#103×2
- D1 ･ SB-800 -