Table of Contents
Advertisement
TABLE OF CONTENTS
Before driving
1
2
When driving
Interior
3
features
Maintenance
4
and care
When trouble
5
arises
Vehicle
6
specifications
7
For owners
Index
VENZA_OM_OM73023U_(U)
Adjusting and operating features such as door locks,
mirrors, and steering column
Driving, stopping and safe-driving information
Air conditioning and audio systems, as well as other in-
terior features for a comfortable driving experience
Cleaning and protecting your vehicle, performing do-it-
yourself maintenance, and maintenance information
What to do if the vehicle needs to be towed, gets a flat
tire, or is involved in an accident
Detailed vehicle information
Reporting safety defects for U.S. owners, and seat belt
and SRS airbag instructions for Canadian owners
Alphabetical listing of information contained in this
manual
I n f o r ma t i o n P r o v i d e d b y :
1
Advertisement
Table of Contents
Related Manuals for Toyota 2015 Venza
Summary of Contents for Toyota 2015 Venza
- Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column When driving Driving, stopping and safe-driving information Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Index For vehicles with an Entune Premium Audio with Navigation or Entune Audio Plus, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL” for information regarding the equipment listed below. • Navigation system • Audio system 1-4. Opening and closing Before driving the windows and moon roof Power windows..... - Page 3 2-3. Operating the lights When driving and wipers Headlight switch ....212 Automatic High Beam..216 2-1. Driving procedures Fog light switch....223 Driving the vehicle....162 Windshield wipers Engine (ignition) switch and washer....... 225 (vehicles with smart Rear window wiper key system).......
- Page 4 TABLE OF CONTENTS Index ® Registering a Bluetooth Interior features audio player for the first time ...... 366 ® Registering a Bluetooth 3-1. Using the air conditioning phone for the first time..367 system and defogger ® Registering a Bluetooth Automatic air conditioning device .......
- Page 5 3-3. Using the interior lights Maintenance and care Interior lights list ....430 • Personal/interior light main switch........ 431 4-1. Maintenance and care • Personal/interior lights Cleaning and protecting the and luggage compartment vehicle exterior ....470 light ........432 Cleaning and protecting the vehicle interior ....
- Page 6 TABLE OF CONTENTS Index When trouble arises Vehicle specifications 5-1. Essential information 6-1. Specifications Emergency flashers ... 554 Maintenance data (fuel, oil level, etc.) ... 612 If your vehicle needs to be towed ...... 555 Fuel information....626 If you think something is Tire information....
- Page 7 Index Abbreviation list....674 Alphabetical index .... 676 What to do if..... 685 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 8 Pictorial index Exterior Windshield wipers P. 225 Moon roof P. 100 Hood P. 487 Outside rear view mirrors P. 92 Side turn signal lights P. 185 Fog lights P. 223 Headlights P. 212 Daytime running lights P. 214 Front turn signal lights P.
- Page 9 Rear window defogger P. 316 Tail lights P. 212 Fuel filler door P. 105 Rear window wiper P. 229 Side doors P. 50 Back door License plate Tires P. 56 light P. 212 ●Rotation P. 506 ●Replacement P. 579 Rear view monitor system ...
- Page 10 Pictorial index Interior Head restraints P. 78 Seat belts P. 81 SRS driver airbag P. 119 Power window switches P. 96 SRS front passenger airbag P. 119 Floor mats Rear seats P. 70 P. 453 Glove box P. 435 Console boxes P.
- Page 11 Assist grips P. 452 Personal/interior lights P. 431, 432 Personal/interior lights SRS curtain shield airbags P. 431, 432 P. 119 Vanity mirrors P. 446 Garage door opener switches P. 457 Moon roof switches P. 100 Overhead console P. 438 Sun visors P.
- Page 12 Pictorial index Interior Driving position memory switches P. 73 Inside lock button P. 51 Door lock switch P. 51 Power window switches P. 96 Window lock switch P. 96 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 13 Shift lever Seat heater switches P. 180 P. 449 Shift lock override button P. 593 Auxiliary box P. 442 Console box Cup holders P. 436 P. 439 AUX port/USB port Auxiliary box P. 442 P. 325 Power outlet P. 447 ...
- Page 14 Pictorial index Instrument panel Windshield wipers and washer switch P. 225 Rear window wiper and washer switch P. 229 Headlight switch P. 212 Turn signal lever Engine (ignition) switch (vehicles with P. 185 Fog light switch P. 223 smart key system) P.
- Page 15 VSC OFF switch P. 258 Intuitive parking assist switch P. 235 Power back door switch P. 57 Outside rear view mirror switches P. 92 Auxiliary box P. 442 Power back door main switch P. 59 : If equipped : Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
- Page 16 Pictorial index Instrument panel Telephone switch P. 396 Talk switch Audio remote control switches P. 323, 396 P. 426 Cruise control switch P. 231 Engine (ignition) switch (vehicles without smart key system) P. 177 Emergency flasher Multi-information display switches switch P.
- Page 17 Air conditioning system P. 306 Rear window defogger switch P. 316 : Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 18 Pictorial index Luggage compartment Power back door switch P. 58 Back door handle P. 57 Luggage cover P. 455 Luggage compartment light P. 432 Shopping bag Shopping bag hook P. 455 hook P. 455 Rear seat lever P. 71 Auxiliary box P.
- Page 19 Power outlet P. 447 Rear seat lever P. 71 : If equipped VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 20: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle. - Page 21 ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 22 Furthermore, these computers do not record con- versations, sounds or pictures. ● Data usage Toyota may use the data recorded in these computers to diagnose malfunc- tions, conduct research and development, and improve quality. Toyota will not disclose the recorded data to a third party except: •...
- Page 23 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
- Page 24 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency •...
- Page 25 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
- Page 26 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
-
Page 27: Before Driving
Before driving 1-1. Key information 1-4. Opening and closing the windows and moon roof Keys ........28 Power windows ....96 1-2. Opening, closing and Moon roof......100 locking the doors Sunshade......104 Smart key system ....30 1-5. Refueling Wireless remote control ...... -
Page 28: Key Information
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles with smart key system Electronic keys • Operating the smart key system (P. 30) • Operating wireless remote control function (P. 45) Mechanical keys Key number plate Vehicles without smart key system Keys Operating the wireless remote... - Page 29 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made at your Toyota dealer using the key number plate. (P. 594) ■...
-
Page 30: Opening, Closing And Locking The Doors
1-2. Opening, closing and locking the doors Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (P. 31) Locks and unlocks the doors (P. - Page 31 1-2. Opening, closing and locking the doors Unlocking and locking the doors Front door handle Grip the driver’s door handle to unlock the door. Grip the passen- ger’s door handle to unlock all the doors. Make sure to touch the sensor on the back of the handle.
- Page 32 1-2. Opening, closing and locking the doors Back door Press the unlock button to unlock the door. The door cannot be unlocked for 3 seconds after the door is locked. Lock the back door again when you leave the vehicle. The back door will not lock automatically after it has been opened and then closed.
- Page 33 1-2. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside cabin Antennas inside cabin Antenna outside luggage com- partment VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 34 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlock- ing the doors The system can be oper- ated when the electronic key is within about 2.3 ft. (0.7 m) of an outside door handle.
- Page 35 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ When the door cannot be locked using the topside sensor area If the door will not lock even when the topside sensor area is touched, try touch- ing both the topside and underside sen-...
- Page 36 1-2. Opening, closing and locking the doors ■ Switching the door unlock function It is possible to set which doors the entry function unlocks. STEP Turn the “ENGINE START STOP” switch OFF. STEP When the indicator on the key surface is turned off, press and hold for approximately 5 seconds while pressing the key.
- Page 37 1-2. Opening, closing and locking the doors ■ Battery-saving function In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. ● When the entry function has not been used for 2 weeks or more ●...
- Page 38 1-2. Opening, closing and locking the doors ■ To operate the system properly Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from outside of the vehicle.
- Page 39 1-2. Opening, closing and locking the doors ● Even if the electronic key is not inside the vehicle, it may be possible to start the engine if the electronic key is near the window. ● The doors may unlock or lock if a large amount of water splashes on the door handle, such as in the rain or in a car wash when the electronic key is within the effective range.
- Page 40 1-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
- Page 41 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The “ENGINE START STOP” switch was turned to ACCESSORY mode Turn the “ENGINE while the driver’s door was START STOP” switch open (or the driver’s door OFF and close the was opened while the Interior alarm driver’s door...
- Page 42 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the engine without the Start the engine with pings once electronic key being the electronic key present, or the electronic...
- Page 43 1-2. Opening, closing and locking the doors ■ If the smart key system does not operate properly ● Locking and unlocking the doors: Use the mechanical key. (P. 595) ● Starting the engine (P. 596) ■ When the electronic key battery is fully depleted P.
- Page 44 (P. 33) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
-
Page 45: Wireless Remote Control
1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles with smart key system Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. - Page 46 1-2. Opening, closing and locking the doors Vehicles without smart key system Locks all doors Pressing holding: Sounds alarm (P. 115) Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Pressing holding: Opens...
- Page 47 1-2. Opening, closing and locking the doors ■ Door lock buzzer If a door or back door is not fully closed, a buzzer sounds continuously for 10 seconds if an attempt to lock the door is made. Fully close the door to stop the buzzer, and lock the vehicle once more.
- Page 48 1-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles with smart key system P. 35 Vehicles without smart key system The wireless remote control function may not operate normally in the fol- lowing situations. ●Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves ●When carrying a portable radio, cellular phone or other wireless com- munication device...
- Page 49 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 50: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) P. 30 ■ Wireless remote control P. -
Page 51: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door The front doors can be opened by pulling the inside handles even if the lock buttons are in the lock position. -
Page 52: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors Locking the driver’s doors from the outside without a key STEP Move the inside lock button to the lock position. STEP Close the door. Vehicles with smart key system The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle. -
Page 53: Information
1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked Shifting the shift lever out of “P” locks all door locking function doors. Shift position linked Shifting the shift lever to “P”... -
Page 54: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors STEP Vehicles with smart key system: Close all the doors and switch the “ENGINE START STOP” switch to IGNITION ON mode. (Perform STEP within 20 sec- onds.) Vehicles without smart key system: Close all the doors and switch the engine switch to the “ON” STEP position. -
Page 55: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors ■ Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, however, the system may not operate. -
Page 56: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be opened using the back door opener. The back door can be locked and unlocked using the entry function (vehicles with smart key system), wireless remote control or door lock switch. In addition, the power back door (if equipped) can be opened using the power back door switch or wireless remote control. -
Page 57: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors ■ Opening/closing the back door from inside the vehicle (vehicles with power back door) Push and hold the switch to open/close. Pressing switch again while the power back door is operating will cause the opera- tion to reverse. -
Page 58: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors Power back door switch (vehicles with power back door) Push the switch to close. Pressing the switch again while the power back door is closing will cause it to open again. However, the reverse operation cannot be performed for the first second after pressing the switch to close the door. -
Page 59: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors Canceling the power back door system (vehicles with power back door) Turn the main switch off to dis- able the power back door sys- tem. Inoperative Operative The back door cannot be oper- ated even with the wireless remote control or power back door switch. -
Page 60: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors ■ The power back door can be opened/closed when (vehicles with power back door) Vehicles with smart key system ● The “ENGINE START STOP” switch is in IGNITION ON mode, and the shift lever is in “P”. ●... -
Page 61: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors CAUTION ■ While driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. -
Page 62: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it. -
Page 63: Venza_Om_Om73023U_(U
If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. ■ Back door closer ●... -
Page 64: Venza_Om_Om73023U_(U
When installing an accessory part to the back door, using a genuine Toyota part is recom- mended. VENZA_OM_OM73023U_(U) -
Page 65: Venza_Om_Om73023U_(U
Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other Damper stay than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it. -
Page 66: Venza_Om_Om73023U_(U
1-2. Opening, closing and locking the doors NOTICE ■ To prevent back door closer malfunction Do not apply excessive force to the back door while the back door closer is operating. ■ To prevent damage to the power back door (vehicles with power back door) ●... -
Page 67: Adjustable Components (Seats, Mirrors, Steering Wheel)
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Power seat Seat position fore/aft control switch Seatback angle control switch Seat cushion (front) angle control switch (driver’s side only) Vertical height control switch (driver’s side only) Lumbar support control switch Manual seat Seat position fore/aft adjust- ment lever... -
Page 68: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward and upward to help reduce the risk of whiplash on the seat occupant. -
Page 69: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment ● Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, during an accident the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury. -
Page 70: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Seatback angle adjustment lever Pull up the lever until the lock is completely released. Folding down the rear seatbacks ■ Before folding down the rear seatbacks Stow the seat belt buckles and STEP lower the head restraints to the lowest position. -
Page 71: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Pass the outer seat belts and STEP plates through the seat belt hangers. This prevents the shoulder belt from being damaged. Make sure that the seat belts are removed from the hangers before using them. -
Page 72: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment Do not recline the seat more than necessary when the vehicle is in motion, to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident. -
Page 73: Driving Position Memory
1-3. Adjustable components (seats, mirrors, steering wheel) Driving position memory Your preferred driving position (the position of the driver’s seat and angle of the outside rear view mirrors) can be memorized and recalled by pressing a button. It is also possible to set this function to activate automatically when the doors are unlocked. -
Page 74: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Recalling the memorized position STEP Check that the shift lever is in P. STEP Vehicles with smart key system: Turn the “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system: Turn the engine switch is in the “ON”... -
Page 75: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Power easy access system The auto away/return function enables easy access by activat- ing when the driver attempts to enter or exit the vehicle. Auto away function (exiting the vehicle) When all of the following actions have been performed, the seat will move backward: ●... -
Page 76: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Operating the driving position memory after turning the “ENGINE START STOP” switch off (vehicles with smart key system) or the key is removed from the engine switch (vehicle without smart key system) Memorized seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. -
Page 77: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 78: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front and rear outboard seats Vertical adjustment Pull the head restraint up. Lock Down release button Push the head restraints down while pressing the lock release button. -
Page 79: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position when using. -
Page 80: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ●... -
Page 81: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the... -
Page 82: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed until you hear a click. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to... -
Page 83: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend, and you can move around fully. -
Page 84: Venza_Om_Om73023U_(U
Each seat belt should be used by one person only. Do not use a seat belt for more than one person at the same time, including children. ● Toyota recommends that children should be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●... -
Page 85: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (P. 81) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. -
Page 86: Venza_Om_Om73023U_(U
● Do not attempt to install, remove, modify, disassemble or dispose of a seat belt. Have any necessary repairs carried out by your Toyota dealer. Inap- propriate handling of the pretensioner may cause it to activate or operate improperly and may cause death or serious injury. -
Page 87: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender, if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system, because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of a sudden stop, sudden swerve or an accident. -
Page 88: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically. -
Page 89: Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver’s seating posture. Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. -
Page 90: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Automatic anti-glare function Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode ON/OFF When the automatic anti-glare function is in ON mode, the indi- cator illuminates. -
Page 91: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error To ensure correct functioning of the sen- sors, do not touch or cover the sensors. CAUTION ■ While driving Do not adjust the position of the mirror. Doing so may lead to mishandling of the vehicle and an accident, or result- ing in death or serious injury. -
Page 92: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left Folding back the mirrors (power type) Press the switch to fold the mir- rors. -
Page 93: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors (manual type) Push backward to fold the mir- rors. Blind Spot Mirrors The Blind Spot Mirrors increase the view of surrounding area to assist the driver when checking surrounding area before chang- ing lanes. -
Page 94: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) Linked mirror function when reversing (if equipped) When the mirror select switch is in the L or R position, the outside rear view mirrors will automatically angle downwards when the vehi- cle is reversing in order to give a better view of the ground. To disable this function, move the mirror select switch to the neutral position (between L and R). -
Page 95: Venza_Om_Om73023U_(U
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ While driving Observe the following precautions. Failing to do so may result in losing control of the vehicle and cause an acci- dent, resulting in death or serious injury. ● Do not adjust the mirrors. ●... -
Page 96: Opening And Closing The Windows And Moon Roof
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. One-touch closing Closing One-touch opening Opening :To stop the window partway, operate the switch in the opposite direction. Window lock switch Press the switch down to lock passenger window switches. -
Page 97: Venza_Om_Om73023U_(U
1-4. Opening and closing the windows and moon roof ■ The power windows can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■... -
Page 98: Venza_Om_Om73023U_(U
If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■ Customization Settings (e.g. -
Page 99: Venza_Om_Om73023U_(U
1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● The driver is responsible for all the power window operations, including the operation for the passengers. -
Page 100: Moon Roof
1-4. Opening and closing the windows and moon roof Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully open position to reduce wind noise. -
Page 101: Information
1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■... -
Page 102: Venza_Om_Om73023U_(U
If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 103: Venza_Om_Om73023U_(U
1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving. -
Page 104: Sunshade
1-4. Opening and closing the windows and moon roof Sunshade The sunshade can be opened and closed manually. Front Slide the sunshade. The front sunshade will open automatically when the moon roof is opened. (P. 100) Rear Slide the sunshade. ... -
Page 105: Refueling
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle ● Vehicles with smart key system Turn the “ENGINE START STOP” switch off and ensure that all the doors and windows are closed. ●... - Page 106 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction.
- Page 107 1-5. Refueling CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so, may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any static electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite.
- Page 108 Do not top off the fuel tank ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
-
Page 109: Theft Deterrent System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts. - Page 110 1-6. Theft deterrent system Vehicles without smart key system: The indicator light flashes after the key has been removed from the engine switch to indicate that the system is operating. The indicator light stops flash- ing after the registered key has been inserted into the engine switch to indicate that the sys- tem has been canceled.
- Page 111 1-6. Theft deterrent system ● For vehicles sold in Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. NOTICE ■...
-
Page 112: Alarm
1-6. Theft deterrent system Alarm The system sounds the alarm and flashes lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set. ● A locked door is unlocked or opened in any way other than by using the entry function (vehicles with smart key system), the wireless remote control door lock function or the mechanical key. - Page 113 1-6. Theft deterrent system ■ Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm. ● Unlock the doors using the entry function (vehicles with smart key system) or the wireless remote control. ● Start the engine. (The alarm will be deactivated or stopped after a few seconds.) ■...
- Page 114 1-6. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations. (Stopping the alarm deactivates the alarm system.) ● The doors are unlocked using the mechanical key. ● A person inside the vehicle opens a door or hood.
- Page 115 1-6. Theft deterrent system ■ Panic mode Vehicles with smart key system When is pressed for longer than about one second, an alarm will sound for about 60 seconds and the vehicle lights will flash or come on to deter any person from trying to break into or damage your vehicle.
-
Page 116: Theft Prevention Labels (U.s.a.)
1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law. ITY16C012 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 117: Safety Information
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required. -
Page 118: Information
1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger. -
Page 119: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-... -
Page 120: Information
1-7. Safety information Side and curtain shield airbags Side airbags Can help protect the torso of the front seat occupants. Curtain shield airbags Can help protect primarily the head of front and rear outboard seat occupants. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 121: Information
1-7. Safety information Airbag system components Front passenger airbag Driver airbag Curtain shield airbag Side impact sensors (front door) Seat belt pretensioners and force limiters Driver’s seat belt buckle switch Side airbag Driver’s seat position sensor “AIR BAG ON/OFF” indicator light Knee airbag Front passenger occupant... -
Page 122: Information
1-7. Safety information Your vehicle is equipped with “ADVANCED AIRBAGS” designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc. shown in the system com- ponents diagram above. -
Page 123: Information
1-7. Safety information ■ SRS airbag deployment conditions (front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform). -
Page 124: Information
1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●... -
Page 125: Information
1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment. -
Page 126: Information
1-7. Safety information ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●... -
Page 127: Information
1-7. Safety information ● The surface of the seats with the side airbag is scratched, cracked, or other- wise damaged. ● The portion of the front, center and rear pillars or roof side rail garnishes (pad- ding) containing the curtain shield air- bags inside is scratched, cracked or otherwise damaged. -
Page 128: Information
1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts. -
Page 129: Information
An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children. -
Page 130: Information
1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. -
Page 131: Information
1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board or steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy. -
Page 132: Information
If the areas where the SRS airbags are stored, such as the steering wheel pad and front, center and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 133: Replacement
Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbag may malfunction or deploy (inflate) accidentally, causing death or serious injury. -
Page 134: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. SRS warning light Front passenger’s seat belt reminder light “AIR BAG ON”... -
Page 135: Information
1-7. Safety information Condition and operation in the front passenger occupant classi- fication system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seat... -
Page 136: Information
1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” Not illumi- indicator lights nated Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag Devices... -
Page 137: Information
1-7. Safety information ■ System malfunction “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Curtain shield airbag Activated... -
Page 138: Information
1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt tab has not been left inserted into the buckle before someone sits in the front passenger seat. -
Page 139: Information
Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction in the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks. -
Page 140: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems. -
Page 141: Information
1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing Infant seat/convertible seat Forward facing Convertible seat VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 142: Information
1-7. Safety information Booster seat ■ When installing the child restraint system on the front passenger seat When you have to use a child restraint system on the front passenger seat, adjust the following: ● The seatback to the most upright posi- tion ●... -
Page 143: Information
● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat. -
Page 144: Information
1-7. Safety information CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or an accident. -
Page 145: Information
1-7. Safety information CAUTION ■ When the child restraint system is not in use ● Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compart- ment. -
Page 146: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system. -
Page 147: Information
1-7. Safety information Anchor bracket (for top tether strap) Anchor brackets are provided for all rear seats. Installation with LATCH system Fold the seatback while pulling STEP the lever. Return the seatback and secure it as upright as possi- ble (1st lock position). Adjust the seatback to the 3rd lock position. -
Page 148: Information
1-7. Safety information Type A STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the hooks of the lower straps onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. STEP If the child restraint has a top tether strap, the top... -
Page 149: Information
1-7. Safety information Type B STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the buckles onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. STEP If the child restraint has a top tether strap, the top tether strap should be latched... -
Page 150: Information
1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear-facing Infant seat/convertible seat ■ Place the child restraint system STEP on the rear seat facing the rear of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle. -
Page 151: Information
1-7. Safety information Fully extend the shoulder belt STEP and then allow it to retract slightly in order to activate the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. -
Page 152: Information
1-7. Safety information Forward-facing Convertible seat ■ Place the child restraint system STEP on the seat facing the front of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. -
Page 153: Information
1-7. Safety information Fully extend the shoulder strap STEP and then allow it to retract slightly into the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. -
Page 154: Information
1-7. Safety information ■ Booster seat Place the booster seat on the STEP seat facing the front of the vehi- cle. Sit the child in the booster seat. STEP Fit the seat belt to the booster seat according to the manufac- turer’s instructions and insert the plate into the buckle. -
Page 155: Information
1-7. Safety information Removing a child restraint installed with a seat belt Press the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap STEP Secure the child restraint using a seat belt or lower anchors, and do the following. -
Page 156: Information
1-7. Safety information Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Outside only: Adjust the head STEP restraint to the downmost posi- tion. -
Page 157: Information
1-7. Safety information CAUTION ■ When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving or an accident. -
Page 158: Information
1-7. Safety information CAUTION ■ When installing a child restraint system ● When installing a child restraint system in the rear center seat, adjust both seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sudden swerving or an accident. -
Page 159: Information
1-7. Safety information CAUTION ■ Do not use a seat belt extender If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of sud- den braking, sudden swerving or an accident. -
Page 160: Information
1-7. Safety information VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 161: When Driving
When driving 2-1. Driving procedures 2-3. Operating the lights and wipers Driving the vehicle.... 162 Headlight switch....212 Engine (ignition) switch (vehicles with smart Automatic High Beam ..216 key system)....173 Fog light switch ....223 Engine (ignition) switch Windshield wipers (vehicles without smart and washer .... -
Page 162: Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine P. 173, 177 ■ Driving STEP With the brake pedal depressed, shift the shift lever to “D”. (P. 180) STEP Release the parking brake. - Page 163 2-1. Driving procedures STEP Vehicles with smart key system: Turn the “ENGINE START STOP” switch off and stop the engine. Vehicles without smart key system: Turn the engine switch to the “LOCK” position and stop the engine. STEP Lock the door, making sure that you have the key on your person.
- Page 164 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down. ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel.
- Page 165 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. VENZA_OM_OM73023U_(U)
- Page 166 2-1. Driving procedures CAUTION ● Do not shift the shift lever to “P” while the vehicle is moving. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the shift lever to “R” while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.
- Page 167 2-1. Driving procedures CAUTION ● Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury.
- Page 168 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have your Toyota dealer check and replace the brake pads as soon as pos- sible. The rotor damage can result if the pads are not replaced when needed.
- Page 169 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
- Page 170 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
- Page 171 2-1. Driving procedures NOTICE ■ While driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not use the accelerator pedal or depress accelerator and brake pedals together to hold the vehicle on a hill.
- Page 172 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ● Brake function ●...
-
Page 173: Engine (Ignition) Switch (Vehicles With Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in “P”. - Page 174 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) Emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
- Page 175 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 109) Contact your Toyota dealer. ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.
- Page 176 ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 177: Engine (Ignition) Switch (Vehicles Without Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles without smart key system) ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in “P”. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”... -
Page 178: Venza_Om_Om73023U_(U
2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” STEP Shift the shift lever to “P”. STEP Push in the key and turn to the “LOCK” position. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”... -
Page 179: Venza_Om_Om73023U_(U
2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■... -
Page 180: Automatic Transmission
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Vehicles with smart key system: While the “ENGINE START STOP” switch is in IGNITION ON mode, depress the brake pedal and move the shift lever. -
Page 181: Venza_Om_Om73023U_(U
2-1. Driving procedures ■ Shift position uses Shift position Function Parking the vehicle or starting the engine Reversing Neutral Normal driving S mode driving (P. 182) : Shifting to the D position allows the system to select a gear suitable for the driving conditions. -
Page 182: Venza_Om_Om73023U_(U
2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S mode driving position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is set automatically to 5 or 4 accord- ing to vehicle speed. -
Page 183: Venza_Om_Om73023U_(U
2-1. Driving procedures ■ Shift ranges and their functions ● Automatically selecting gears between 1 and 6 according to vehicle speed and driving condition. (However the gear is limited according to selected shift range.) ● You can choose from 6 levels of engine braking force. ●... -
Page 184: Venza_Om_Om73023U_(U
S mode driving position This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.) ■... -
Page 185: Turn Signal Lever
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change. -
Page 186: Parking Brake
2-1. Driving procedures Parking brake Sets the parking brake (Depressing the pedal again releases the parking brake.) U.S.A. Canada : Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. ■ Usage in winter time P. -
Page 187: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P. -
Page 188: Instrument Cluster
2-2. Instrument cluster Gauges and meters Vehicles with smart key system The following gauges, meters and display illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The following gauges, meters and displays illuminate when the engine switch is in the “ON”... -
Page 189: Venza_Om_Om73023U_(U
2-2. Instrument cluster Odometer/trip meter and trip meter reset button Switches between odometer and trip meter displays. Pushing and hold- ing the button will reset the trip meter when the trip meter is being dis- played. Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. -
Page 190: Venza_Om_Om73023U_(U
2-2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. ● The engine may be overheating if the engine coolant temperature gauge is in the red zone (“H”). -
Page 191: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated. -
Page 192: Venza_Om_Om73023U_(U
2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Cruise control “SET” indicator (P. 231) (P. 185) 1, 2 Headlight high beam Slip indicator (P. 257) indicator (P. 213) Headlight indicator VSC OFF indicator (P. -
Page 193: Venza_Om_Om73023U_(U
Have the vehicle inspected by your Toyota dealer. : The indicator flashes to indicate that the system is operating. -
Page 194: Multi-Information Display (Tft Type)
2-2. Instrument cluster Multi-information display (TFT type) The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. ● Clock (P. 199) Indicates and sets the time. ● Outside temperature Indicates the outside temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). -
Page 195: Information
2-2. Instrument cluster Switching the display “INFO” button “SELECT RESET” button To reset the functions below, press the “SELECT RESET” but- ton. • Average Fuel Economy • Average Speed • Trip Timer “SETUP” button Trip information Display items can be switched by pressing the “INFO” button. ■... -
Page 196: Venza_Om_Om73023U_(U
2-2. Instrument cluster ■ Distance to Empty Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. ● This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played. -
Page 197: Information
2-2. Instrument cluster ■ Trip Timer Displays the elapsed time since the timer was reset. The timer only functions when the engine is running. The timer can be started and paused by pressing the “SELECT RESET” button, and reset by pressing and holding the “SELECT RESET” button when the trip timer is displayed. -
Page 198: Information
2-2. Instrument cluster Setting up the displays STEP Press the “SETUP” button while the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 10 seconds, the display will revert to the previous screen. -
Page 199: Venza_Om_Om73023U_(U
2-2. Instrument cluster ■ Setting the clock STEP Select “Clock” on the “Display Settings” screen, and press the “SELECT RESET” button. Press the “INFO” button to adjust STEP the hours and the “SETUP” but- ton to adjust the minutes. Press and hold the buttons to adjust the time more quickly. -
Page 200: Information
2-2. Instrument cluster ■ Selecting the language STEP Select “Language” on the “Display Settings” screen, and press the “SELECT RESET” button. Select the language you want to STEP read by pressing the “INFO” or “SETUP” button. Press the “SELECT RESET” but- ton to set the language. -
Page 201: Information
2-2. Instrument cluster When a 2-line layout is selected STEP STEP , the “Layout” screen is displayed. First, using the “INFO” and “SETUP” buttons, select the item you wish to display in the first line, and then press the “SELECT RESET” button. Using the “INFO”... -
Page 202: Venza_Om_Om73023U_(U
2-2. Instrument cluster ● Setting the brightness Select “Brightness” STEP “Screen Settings” screen, and press the “SELECT RESET” but- ton. Press the “INFO” or “SETUP” STEP button to adjust the brightness. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit screen. -
Page 203: Venza_Om_Om73023U_(U
2-2. Instrument cluster ● Setting the contrast Select “Contrast” on the “Screen STEP Settings” screen, and press the “SELECT RESET” button. Press the “INFO” or “SETUP” STEP button to adjust the contrast. +: Strengthen -: Weaken Press the “SELECT RESET” but- ton to exit screen. -
Page 204: Information
2-2. Instrument cluster ■ If the vehicle is moved while settings are being changed on the multi- information display If the vehicle speed exceeds approxi- mately 3 mph (5 km/h) while the settings are being changed, “Please Stop Vehicle to Change Settings” will be displayed on the multi-information display, and setting mode will exit after several seconds. -
Page 205: Information
2-2. Instrument cluster ■ When “--”, “E” or “F” is displayed on the outside temperature display The system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Outside temperature display In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. -
Page 206: Multi-Information Display (Lcd Type)
2-2. Instrument cluster Multi-information display (LCD type) The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. ● Clock (P. 208) Indicates and sets the time. ● Outside temperature Indicates the outside temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). -
Page 207: Information
2-2. Instrument cluster Switching the display “INFO-CLOCK” button “RESET-H” button To reset the functions below, press the “RESET-H” button. • Average fuel consumption • Average vehicle speed “US/M-M” button Trip information Display items can be switched by pressing the “INFO-CLOCK” but- ton. -
Page 208: Venza_Om_Om73023U_(U
2-2. Instrument cluster ■ Driving range (RANGE) Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. ● This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played. -
Page 209: Venza_Om_Om73023U_(U
■ When “--”, “E” or “F” is displayed on the outside temperature display The system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Outside temperature display In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. -
Page 210: Fuel Consumption Information
2-2. Instrument cluster Fuel consumption information The fuel consumption information can be displayed on Entune Pre- mium Audio with Navigation, Entune Audio Plus and Entune Audio screen. Vehicles with Entune Premium Audio with Navigation and Entune Audio Plus Press the “APPS” button, and then select “Eco” on the screen. Vehicles with Entune Audio Press the “CAR”... -
Page 211: Information
2-2. Instrument cluster ■ Resetting the data Selecting “Clear” will reset the trip information data. ■ Cruising range Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. -
Page 212: Operating The Lights And Wipers
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows. Type A The daytime running lights turn on. (Type B only) The headlights, park- ing lights, daytime run- ning lights and so on turn on and off auto-... -
Page 213: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Vehicles with Automatic High Beam: When the light switch is in position, the Automatic High Beam system will be acti- vated. -
Page 214: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to others, the high beam headlights turn on automatically at a reduced intensity (vehicles with halogen head- lights) or the LED daytime running lights turn on automatically (vehicles with discharge headlights) whenever the engine is started and the park- ing brake is released. -
Page 215: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Vehicles without smart key system ● When the headlights are on: The headlights and tail lights turn off 30 seconds after a door is opened and closed if the engine switch has been switched to “ACC” or “LOCK” position. ●... -
Page 216: Automatic High Beam
2-3. Operating the lights and wipers Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. -
Page 217: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ■ Turning the high beam on/off manually Switching to low beam Pull the lever to original posi- tion. Switching to high beam Turn the light switch to position. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 218: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions When all of the following conditions are fulfilled, high beam will be automatically turned on (after approximately 1 second): ● Vehicle speed is above approximately 20 mph (32 km/h). ●... -
Page 219: Information
2-3. Operating the lights and wipers ■ Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning high beam on or off manually if nec- essary. -
Page 220: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ● In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestri- ans to the high beam. Therefore, you should consider turning the high beam on or off manually rather than relying on the Automatic High Beam system. -
Page 221: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ■ If the Automatic High Beam indicator flashes... It may indicate a malfunction in the system. Contact your Toyota dealer. ■ Customization The Automatic High Beam can be turned off. (Customizable features P. 645) ■... -
Page 222: Venza_Om_Om73023U_(U
Do not modify the vehicle. ● Do not replace windshield with a non-genuine windshield. Contact your Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 223: Fog Light Switch
2-3. Operating the lights and wipers Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. The fog lights can be used when the headlights are on low beam. Type A VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 224: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Type B VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 225: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation (when is selected). Type A Intermittent wiper operation speed wiper operation High speed wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency VENZA_OM_OM73023U_(U) -
Page 226: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. Type B Intermittent wiper operation speed wiper operation High speed wiper operation Temporary operation VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 227: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Wash/wipe operation Wipers operate automatically. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 228: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers ■ The windshield wiper and washer can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■... -
Page 229: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 230: Venza_Om_Om73023U_(U
2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation ■ The rear window wiper and washer can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON”... -
Page 231: Using Other Driving Systems
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Set the vehicle speed STEP Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on. -
Page 232: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Adjusting the speed setting To change the set speed, operate the lever until the desired set speed is obtained. Increases speed Decreases speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold the lever in the desired direction. -
Page 233: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied. Pushing lever resumes constant speed control. Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h). -
Page 234: Venza_Om_Om73023U_(U
If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. CAUTION ■... -
Page 235: Intuitive Parking Assist
2-4. Using other driving systems Intuitive parking assist The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, the audio sys- tem screen and a buzzer. Always check the surrounding area when using this system. -
Page 236: Information
2-4. Using other driving systems Display When the sensors detect an obstacle, the following displays inform the driver of the position and distance to the obstacle. Multi-information display Front corner sensor operation Rear corner sensor operation Back sensor operation Audio system screen (vehicles with an Entune Premium Audio with Navigation) When the rear view monitor sys- tem is not displayed. -
Page 237: Venza_Om_Om73023U_(U
2-4. Using other driving systems The distance display and buzzer When a sensor detects an obstacle, the direction of and the approxi- mate distance to the obstacle are displayed and the buzzer sounds. ■ Corner sensor operation and distance to an obstacle The system operates when the vehicle approaches within the fol- lowing distances to an obstacle. -
Page 238: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Back sensor operation and distance to an obstacle The system operates when the vehicle approaches within the fol- lowing distances to an obstacle. The indicator flashes and the buzzer sounds when the system is operating. Approximate distance to obstacle Indicator and buzzer / Color 4.9 to 2.0 ft. -
Page 239: Venza_Om_Om73023U_(U
2-4. Using other driving systems Detection range of the sensors Approximately 1.6 ft. (50 cm) Approximately 4.9 ft. (150 cm) Approximately 2.0 ft. (60 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obsta- cles that are extremely close to the vehicle. -
Page 240: Venza_Om_Om73023U_(U
STEP Select “Setup” on the screen. STEP Select “Vehicle” on the screen. STEP Select “TOYOTA Park Assist Settings” on the screen. STEP Select the desired item. The buzzer sound volume can be adjusted. On or off can be selected for intuitive parking assist display. -
Page 241: Information
• The vehicle is approaching a tall or curved curb. • In harsh sunlight or intense cold weather. • A non-genuine Toyota suspension (lowered suspension etc.) is installed. In addition to the examples above, there are instances in which, because of their shapes, signs and other objects may be judged by the sensor to be closer than they are. -
Page 242: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Certification (Canada only) This ISM device complies with Canadian ICES-001. CAUTION ■ When using the intuitive parking assist Observe the following precautions. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. -
Page 243: Rear View Monitor System
2-4. Using other driving systems Rear view monitor system The rear view monitor system assists the driver by displaying guide lines and an image of the view behind the vehicle while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen. -
Page 244: Venza_Om_Om73023U_(U
2-4. Using other driving systems Screen description Guide lines are displayed on the screen. Guide lines shown differ from those shown on the actual screen. Vehicle width extension guide lines (blue) The line indicates a guide path when the vehicle is being backed straight The displayed width is wider than the actual vehicle width. -
Page 245: Venza_Om_Om73023U_(U
2-4. Using other driving systems Rear view monitor system precautions ■ Area displayed on screen The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image on the rear view mon- itor system can be adjusted: refer to P. -
Page 246: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Rear view monitor system camera The camera for the rear view monitor system is located above the license plate. ● Using the camera If dirt or foreign matter (such as water droplets, snow, mud etc.) is adhering to the camera, it cannot transmit a clear image. -
Page 247: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Differences between the screen and the actual road The distance guide lines and the vehicle width extension guide lines may not actually be parallel with the dividing lines of the park- ing space, even when they appear to be so. Be sure to check visu- ally. -
Page 248: Venza_Om_Om73023U_(U
2-4. Using other driving systems ● When the ground behind the vehicle slopes down sharply The distance guide lines will appear to be farther from the vehicle than the actual distance. Because of this, objects will appear to be closer than they actually are. -
Page 249: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ When approaching three-dimensional objects It is not possible to determine the position of three-dimensional objects (such as vehicles) using the vehicle width extension guide lines and distance guide lines. When approaching a three-dimen- sional object that extends outward (such as the flatbed of a truck), be careful of the following. -
Page 250: Venza_Om_Om73023U_(U
If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 251: Venza_Om_Om73023U_(U
Have the vehicle The image is out area has received a strong inspected by your of alignment impact. Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 252: Venza_Om_Om73023U_(U
Solution Have the vehicle The camera position is out of inspected by your alignment. Toyota dealer. If this happens due to The guide lines • The vehicle is tilted (there is a these causes, it does are very far out... -
Page 253: Venza_Om_Om73023U_(U
2-4. Using other driving systems CAUTION ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to check visually behind and all around the vehicle before proceeding. Observe the following precautions to avoid an accident that could result in death or serious injuries. -
Page 254: Venza_Om_Om73023U_(U
2-4. Using other driving systems CAUTION ● In low temperatures, the screen may darken or the image may become faint. The image could distort when the vehicle is moving, or you may become unable to see the image on the screen. Be sure to check direct visually and with the mirrors all around the vehicle before proceeding. -
Page 255: Venza_Om_Om73023U_(U
● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 256: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■... -
Page 257: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ Active Torque Control 4WD (if equipped) Automatically switches from front-wheel drive to AWD (All- Wheel Drive) according to driving conditions, helping to ensure reliable handling and stability. Examples of conditions where the system will switch to AWD are when cornering, going uphill, starting off or accelerating, and when the road surface is slippery due to snow or rain etc. -
Page 258: Venza_Om_Om73023U_(U
2-4. Using other driving systems Disabling the TRAC system If the vehicle gets stuck in mud, dirt or snow, the TRAC system may reduce power from the engine to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it. -
Page 259: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ When the “TRAC OFF” indicator light comes on even if the VSC OFF switch has not been pressed TRAC and hill-start assist control cannot be operated. Contact your Toyota dealer. ■ Automatic reactivation of TRAC and VSC... -
Page 260: Venza_Om_Om73023U_(U
2-4. Using other driving systems ■ EPS operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. ■ Reduced effectiveness of EPS system The effectiveness of EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. -
Page 261: Tires
In addition, make sure that the tires are inflated to the speci- fied tire pressure level. The ABS and VSC will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction. -
Page 262: Hill-Start Assist Control
2-4. Using other driving systems Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely. - Page 263 • The shift lever is moved to “P”. • The parking brake is applied. • The brake pedal is depressed again. ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION ■ Hill-start assist control ●...
-
Page 264: Driving Information
2-5. Driving information Utility vehicle precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity. Utility vehicle feature ● Specific design characteristics give it a higher center of gravity than ordinary passenger cars. -
Page 265: Information
2-5. Driving information CAUTION ■ Utility vehicle precautions Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. -
Page 266: Information
2-5. Driving information Off-road driving Your vehicle is not designed to be driven off-road. However, in the event that off-road driving cannot be avoided, please observe the fol- lowing precautions to help avoid the areas prohibited to vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel. -
Page 267: Information
2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places. -
Page 268: Information
2-5. Driving information NOTICE ■ To prevent the water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ●... -
Page 269: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment when- ever possible. Be sure all items are secured in place. ●... -
Page 270: Information
2-5. Driving information Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit— (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”... -
Page 271: Information
2-5. Driving information Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 612) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. -
Page 272: Information
2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment. ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. -
Page 273: Information
2-5. Driving information CAUTION ■ Weight of the load ● Do not exceed the maximum axle weight rating or the total vehicle weight rating. ● Even if the total load of occupant’s weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury. -
Page 274: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, Trailer Weight Rating (TWR) and cargo capacity. Total load capacity (vehicle capacity weight): P. 612 ■ Total load capacity means the combined weight of occupants, cargo and luggage. -
Page 275: Tires
2-5. Driving information ■ Total load capacity and seating capacity These details are also described on the tire and loading information label. (P. 513) CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident. -
Page 276: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures. -
Page 277: Tires
2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing. -
Page 278: Tires
2-5. Driving information Selection tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain: 0.12 in. (3.0 mm) 1.18 in. (30.0 mm) 0.39 in. (10.0 mm) Cross chain: 0.16 in. -
Page 279: Tires
2-5. Driving information CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the size specified for your vehicle. ●... -
Page 280: Tires
NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota deal- ers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters. -
Page 281: Trailer Towing
To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc. -
Page 282: Information
2-5. Driving information Towing related terms ■ GCWR (Gross Combination Weight Rating) 2GR-FE engine (Without towing package) and 1AR-FE engine The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the... -
Page 283: Information
2-5. Driving information ■ GVWR (Gross Vehicle Weight Rating) 2GR-FE engine (Without towing package) and 1AR-FE engine The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the... -
Page 284: Information
2-5. Driving information ■ GAWR (Gross Axle Weight Rating) 2GR-FE engine (Without towing package) and 1AR-FE engine The maximum allowable gross Front GAWR axle weight. The gross axle weight is the load placed on each axle (front and rear). Rear GAWR 2GR-FE engine (With towing package) Front GAWR Rear GAWR... -
Page 285: Information
2-5. Driving information ■ TWR (Trailer Weight Rating) 2GR-FE engine (Without towing package) and 1AR-FE engine The maximum allowable gross (With brakes) trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. -
Page 286: Information
2-5. Driving information ■ Unbraked TWR (Unbraked Trailer Weight Rating) The trailer weight rating for tow- (Without brakes) ing a trailer without a trailer ser- vice brake system. ■ Tongue Weight 2GR-FE engine (Without towing package) and 1AR-FE engine The load placed on the trailer hitch ball. -
Page 287: Information
2-5. Driving information Weight limits ● The gross trailer weight must never exceed TWR described in the table. (P. 288) ● The gross combination weight must never exceed the GCWR described in the table. (P. 288) ● The gross vehicle weight must never exceed the GVWR indi- cated Certification... - Page 288 2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR and TWR Vehicles without towing package Driving Engine GCWR...
-
Page 289: Information
2-5. Driving information Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •... -
Page 290: Information
Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle. -
Page 291: Information
2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size. -
Page 292: Information
2-5. Driving information Positions for towing hitch receiver and hitch ball Weight carrying ball position: 46.5 in. (1180 mm) Hitch receiver pin hole posi- tion: 39.2 in. (996.5 mm) Connecting trailer lights Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle’s lights. -
Page 293: Tires
● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest. -
Page 294: Information
2-5. Driving information ● As stopping distance is increased when towing a trailer, vehicle-to- vehicle distance should be increased. For each 10 mph (16 km/h) of speed, allow at least one vehicle and trailer length. ● Avoid sudden braking as you may skid, resulting in the trailer jack- knifing and a loss of vehicle control. -
Page 295: Information
2-5. Driving information ● Avoid holding the brake pedal down too long or applying the brakes too frequently. This could cause the brakes to overheat and result in reduced braking efficiency. ● Due to the added load of the trailer, your vehicle’s engine may overheat on hot days (at temperatures over 85°F [30°C]) when driving up a long or steep grade. -
Page 296: Information
2-5. Driving information ● When restarting after parking on a slope: STEP With the transmission in P, start the engine. Be sure to keep the brake pedal pressed. STEP Shift into a forward gear. If reversing, shift into R. STEP Release the parking brake and brake pedal, and slowly pull or back away from the wheel blocks. -
Page 297: Tires
Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km). -
Page 298: Tires
2-5. Driving information ■ Maintenance ● If you tow a trailer, your vehicle will require more frequent maintenance due to the additional load. (See “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) ● Retighten the fixing bolts of the towing ball and bracket after approxi- mately 600 miles (1000 km) of trailer towing. -
Page 299: Information
2-5. Driving information CAUTION ■ Trailer towing precautions To tow a trailer safely, use extreme care and drive the vehicle in accordance with the trailer’s characteristics and operating conditions. Failure to do so could cause an accident resulting in death or serious injury. Vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch. -
Page 300: Information
2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not use cruise control when towing. ● Slow down and downshift before descending steep or long downhill grades. Do not make sudden downshifts while descending steep or long downhill grades. -
Page 301: Information
NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights. -
Page 302: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with four wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. -
Page 303: Information
2-5. Driving information VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 304: Interior Features
Interior features 3-1. Using the air conditioning Selecting the audio source ......336 system and defogger List screen operation..337 Automatic air conditioning system ......306 Optimal use of the audio system ......339 Rear window defogger ..316 Radio operation....340 CD player operation .. -
Page 305: Venza_Om_Om73023U_(U
Interior features ® Displaying a Bluetooth 3-3. Using the interior lights device details ....373 Interior lights list ....430 ® Detailed Bluetooth • Personal/interior light system settings ....375 main switch ....431 ® • Personal/interior lights Listening to Bluetooth and luggage Audio...... -
Page 306: Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger Automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Fan speed Changes the air Driver’s side temperature control outlets used dial and automatic mode switch Passenger’s side temperature control dial... -
Page 307: Information
3-1. Using the air conditioning system and defogger Multi-information display (TFT type) Automatic mode indicator Airflow display Driver’s side Passenger’s side temperature temperature setting display setting display Air conditioning on indicator Fan speed display The settings display will differ according to the situation. If pressed while in automatic mode, the status of all settings will be dis- played for a number of seconds. -
Page 308: Information
3-1. Using the air conditioning system and defogger Using the automatic mode STEP Press The air conditioning system will begin to operate. In outside air or recirculated air mode, air outlets, fan speed and air conditioning on/ off are automatically adjusted according to the temperature setting. “AUTO”... -
Page 309: Information
3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between dual and simulta- neous modes each time is pressed. -
Page 310: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Press “” (increase) or “” (decrease) on The fan speed is shown on the display. (7 levels) Pressing the button while in automatic mode will place the fan speed into manual mode. -
Page 311: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. Mainly air flows to the feet. Air flows to the feet and the windshield defogger operates. ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time the button is pressed. -
Page 312: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger Defogging the windshield Press The air conditioning system con- trol operates automatically. Recirculated air mode will auto- matically switch to outside air mode. It is not possible to return to recirculated air mode when the switch is on. -
Page 313: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger Front side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Rear center outlets Direct air flow to the left or right, up or down. -
Page 314: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions. As a result, the following may occur. ● Immediately after is pressed, the fan may stop for a while until warm or cool air is ready to flow. -
Page 315: Venza_Om_Om73023U_(U
3-1. Using the air conditioning system and defogger ■ When outside temperature reaches approximately 32°F (0°C) The air conditioning system may not operate even when is pressed. ■ Ventilation and air conditioning odors ● To let fresh air in, set the air conditioning system to the outside air mode. ●... -
Page 316: Rear Window Defogger
3-1. Using the air conditioning system and defogger Rear window defogger Clear the rear window using the defogger. On/off The defogger will automatically turn off after 15 or 60 minutes. This operation time changes according to the ambient tem- perature and vehicle speed. Pressing the switch again also turns the defogger off. - Page 317 3-1. Using the air conditioning system and defogger CAUTION ■ Outside rear view mirror defoggers and windshield wiper de-icer Do not touch the rear view mirror surfaces, the glass at the lower part of the windshield or to the side of the front pillars, as they can become very hot and burn you.
-
Page 318: Using The Audio System (Entune Audio)
3-2. Using the audio system (Entune Audio) Audio system types Refer to each type models depending on your system type. Vehicles with an Entune Premium Audio with Navigation Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. Vehicles with an Entune Audio Plus Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. - Page 319 3-2. Using the audio system (Entune Audio) Vehicles with an Entune Audio P. 320 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 320: Audio System
3-2. Using the audio system (Entune Audio) Audio system Operations such as listening to audio, using the hands-free phone, confirming vehicle information and changing audio system settings are started by using the following buttons. ■ Audio system operation buttons “AUDIO”... - Page 321 3-2. Using the audio system (Entune Audio) Operating the touch screen By touching the screen with your finger, you can control the audio system, etc. ■ Touch Quickly touch and release once. ● Changing and selecting various settings ■ Drag Touch the screen with your finger, and move the screen to the desired position.
- Page 322 3-2. Using the audio system (Entune Audio) NOTICE ■ To avoid damaging the touch screen ● To prevent damaging the screen, lightly touch the screen buttons with your finger. ● Do not use objects other than your finger to touch the screen. ●...
-
Page 323: Steering Wheel Audio Switches
3-2. Using the audio system (Entune Audio) Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navi- gation system. For details, refer to the manual provided with the audio system or navigation system. - Page 324 3-2. Using the audio system (Entune Audio) “”and “” button • Tab change • Press and hold: Seek up/down (radio sta- tions) Fast up/down (tracks/files/ videos) Enter switch • Displays the audio screen (Except when audio screen is displayed) • Displays preset/list screen (When audio screen is displayed)
-
Page 325: Usb Port/Aux Port
3-2. Using the audio system (Entune Audio) USB Port/AUX Port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the audio source selection screen and the device can be operated via audio system. -
Page 326: Basic Audio Operations
3-2. Using the audio system (Entune Audio) Basic Audio Operations Basic audio operations and functions common to each mode are explained in this section. ■ Operating the audio system Press this knob to turn the Press the button to seek up audio system on and off, and or down for a radio station, or turn it to adjust the volume. - Page 327 3-2. Using the audio system (Entune Audio) Random playback Select to change on/off. Repeat play Select to change on/off. ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating.
- Page 328 3-2. Using the audio system (Entune Audio) NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary when the engine is off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids on the audio system. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 329: Setup Menu
3-2. Using the audio system (Entune Audio) Setup menu You can adjust the audio system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen animation, etc. -
Page 330: General Settings
Select to delete personal data (P. 331) Select to update program ver- sions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This... - Page 331 3-2. Using the audio system (Entune Audio) ■ To return to the default settings Select “Default”, and then “Yes”. Delete personal data STEP Select “Delete Personal Data” on the “General Settings” screen. STEP Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted.
-
Page 332: Audio Settings
3-2. Using the audio system (Entune Audio) Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings STEP Press the “SETUP” button. STEP Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations. -
Page 333: Display Settings
3-2. Using the audio system (Entune Audio) Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings STEP Press the “SETUP” button. STEP Select “Display” on the “Setup” screen. Adjust the screen display Adjust the camera display Changes to day mode. - Page 334 3-2. Using the audio system (Entune Audio) Brightness, contrast, tone and color adjustment STEP Select “General” or “Camera” on the “Display Settings” screen. Select the desired item. STEP “-” “+” “Brightness” Darker Brighter “Contrast” Weaker Stronger VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 335: Voice Settings
3-2. Using the audio system (Entune Audio) Voice settings This screen is used for setting the voice command guidance system. Adjust the voice guidance vol- ume setting. voice recognition prompts “High”, “Low” or “Off”. Train voice recognition Set the voice prompt interrupt on/off. -
Page 336: Selecting The Audio Source
3-2. Using the audio system (Entune Audio) Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source STEP Press the “AUDIO” button to display the audio source selec- tion screen. If the audio source selection screen is not displayed, press the “AUDIO”... -
Page 337: List Screen Operation
3-2. Using the audio system (Entune Audio) List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display. - Page 338 3-2. Using the audio system (Entune Audio) Selecting, fast-forwarding and reversing tracks/files/songs ■ Selecting a track/file/song Press the “SEEK >” button or “< TRACK” button, or turn the “TUNE•SCROLL” knob to select the desired track/file/song num- ber. To fast-forward or reverse, press and hold the “SEEK >” button or “<...
-
Page 339: Optimal Use Of The Audio System
3-2. Using the audio system (Entune Audio) Optimal use of the audio system On the “Sound Settings” screen, sound quality (Treble/Mid/Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5. -
Page 340: Radio Operation
3-2. Using the audio system (Entune Audio) Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations... - Page 341 3-2. Using the audio system (Entune Audio) Setting station presets STEP Search for desired stations by turning the “TUNE•SCROLL” knob or pressing the “SEEK >” button or “< TRACK” button. STEP Select “(add new)”. To change the preset station to a different one, select and hold the preset station.
- Page 342 3-2. Using the audio system (Entune Audio) ■ Selecting a desired genre STEP Select “Station List”. STEP FM radio only: Select a desired genre of station and select a desired station. ● The genre list is in the following order: •...
-
Page 343: Cd Player Operation
3-2. Using the audio system (Entune Audio) CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. - Page 344 ■ Error messages If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehi- cle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •...
- Page 345 3-2. Using the audio system (Entune Audio) ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. ■ MP3, WMA and AAC files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression.
- Page 346 3-2. Using the audio system (Entune Audio) ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) • This system can play back AAC files encoded by iTunes. ● Compatible media Media that can be used for MP3, WMA and AAC playback are CD-Rs and CD-RWs.
- Page 347 3-2. Using the audio system (Entune Audio) ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
- Page 348 3-2. Using the audio system (Entune Audio) ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc.
- Page 349 3-2. Using the audio system (Entune Audio) NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, DualDiscs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ●...
-
Page 350: Listening To An Ipod
3-2. Using the audio system (Entune Audio) Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen. - Page 351 3-2. Using the audio system (Entune Audio) Selecting a play mode STEP Select “Browse” on the screen. STEP Select the desired play mode by selecting the “Playlists”, “Art- ists”, “Albums”, “Songs”, “Podcasts”, “Audio books”, “Genres”, “Composers” or “Videos” tab. Then select a song to begin using the selected play mode.
- Page 352 3-2. Using the audio system (Entune Audio) ■ iPod cover art ● Depending on the iPod and songs in the iPod, iPod cover art may be dis- played. ● This function can be changed to on/off. (P. 332) ● It may take time to display iPod cover art, and the iPod may not be oper- ated while the cover art display is in process.
- Page 353 ■ Error messages If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehi- cle to your Toyota dealer. Message Cause/Correction procedures “Connection error.
- Page 354 3-2. Using the audio system (Entune Audio) ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) •...
- Page 355 3-2. Using the audio system (Entune Audio) NOTICE ■ To prevent damage to the iPod or its terminals ● Do not leave the iPod in the vehicle. The temperature inside the vehicle may become high. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected.
-
Page 356: Listening To A Usb Memory Device
3-2. Using the audio system (Entune Audio) Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Touch “USB” on the audio source selection screen. Connecting a USB memory device P. - Page 357 Error messages for USB memory If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehi- cle to your Toyota dealer. Message Cause/Correction procedures “Connection error.
- Page 358 3-2. Using the audio system (Entune Audio) ■ USB memory ● Compatible devices USB memory device that can be used for MP3, WMA and AAC playback. ● Compatible device formats The following device format can be used: • USB communication format: USB2.0 FS (12 Mbps) and USB2.0 HS (480 Mbps) •...
- Page 359 3-2. Using the audio system (Entune Audio) ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) •...
- Page 360 3-2. Using the audio system (Entune Audio) ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
- Page 361 3-2. Using the audio system (Entune Audio) CAUTION ■ While driving Do not connect a USB memory device or operate the device controls. NOTICE ■ To prevent damage to the USB memory device or its terminals ● Do not leave the USB memory device in the vehicle. The temperature inside the vehicle may become high.
-
Page 362: Using The Aux Port
3-2. Using the audio system (Entune Audio) Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” to display the audio control screen. Connecting a portable audio player P. 325 ■... -
Page 363: Preparations To Use Wireless Communication
3-2. Using the audio system (Entune Audio) Preparations to use wireless communication ® The following can be performed using Bluetooth wireless commu- nication: ■ A portable audio player can be operated and listened to via audio system ■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a ®... - Page 364 3-2. Using the audio system (Entune Audio) Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio sys- tem (P. 366, 367, 368) ® 2. Connect the Bluetooth device to be used (P. 370) To be used for audio To be used for hands-free phone ®...
- Page 365 3-2. Using the audio system (Entune Audio) Registering and connecting from the “Bluetooth Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth ” on the “Setup” screen. Select to connect the device to be used with audio system. (P.
-
Page 366: Registering A Bluetooth ® Audio Player For The First Time
3-2. Using the audio system (Entune Audio) ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®... -
Page 367: Registering A Bluetooth ® Phone For The First Time
3-2. Using the audio system (Entune Audio) ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands- free system. -
Page 368: Registering A Bluetooth ® Device
3-2. Using the audio system (Entune Audio) ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ® How to register a Bluetooth device STEP Display the “Bluetooth... - Page 369 3-2. Using the audio system (Entune Audio) Check that this screen is dis- STEP played when registration is com- plete. STEP Select “OK” when the connection status changes from “Con- necting...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again.
-
Page 370: Connecting A Bluetooth ® Device
3-2. Using the audio system (Entune Audio) ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. STEP Press the “SETUP”... - Page 371 3-2. Using the audio system (Entune Audio) Auto connection To turn auto connection mode on, set “Bluetooth Power” to on. (P. 375) When you register a phone, auto connection will be activated. Always ® set it to this mode and leave the Bluetooth phone in a place where a connection can be established.
- Page 372 3-2. Using the audio system (Entune Audio) ■ ® Reconnecting a Bluetooth phone If the system cannot connect due to poor signal strength with the engine switch in the “ACC” or “ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system will automatically attempt to reconnect.
-
Page 373: Displaying A Bluetooth ® Device Details
3-2. Using the audio system (Entune Audio) ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status STEP Display the “Bluetooth Setup” screen. (P. 365) : Bluetooth is a registered trademark of Bluetooth SIG, Inc. STEP Select the device. - Page 374 3-2. Using the audio system (Entune Audio) Changing connection method STEP Select “Connect Audio Player from”. STEP Select “Vehicle” or “Device”. “Vehicle”: Connect the audio system to the portable audio player. “Device”: Connect the portable audio player to the audio system VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 375: Detailed Bluetooth ® System Settings
3-2. Using the audio system (Entune Audio) ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings STEP Display the “Bluetooth Setup” screen. (P. 365) STEP Select “System Settings”. - Page 376 3-2. Using the audio system (Entune Audio) Editing the Bluetooth ® You can change the PIN-code that is used to register your Bluetooth devices in the system. STEP Select “Bluetooth PIN”. STEP Input a PIN-code, and select “OK”. : Bluetooth is a registered trademark of Bluetooth SIG, Inc. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 377: Listening To Bluetooth ® Audio
3-2. Using the audio system (Entune Audio) ® Listening to Bluetooth Audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wireless communication. ® When a Bluetooth device cannot be connected, check the con- nection status on the “Bluetooth* Audio”... - Page 378 3-2. Using the audio system (Entune Audio) ® Playing Bluetooth audio Select to Play/Pause. Audio” screen operation methods, refer to For details on “Bluetooth Basic Audio Operations. (P. 326) For details on how to select a track or album, refer to selecting, fast- forwarding and reversing tracks/files/songs.
-
Page 379: Using A Bluetooth
3-2. Using the audio system (Entune Audio) ® Using a Bluetooth Phone The hands-free system is a function that allows you to use your cel- lular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data sys- tem that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls. - Page 380 3-2. Using the audio system (Entune Audio) ■ Telephone switch (P. 396) ■ Microphone The vehicle’s built in microphone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. To use the hands-free system, must register your...
- Page 381 3-2. Using the audio system (Entune Audio) Status display You can check indicators such as signal strength and battery charge on the phone screen. Connection status Signal strength Battery charge Indicators Conditions Good Poor Not connected Connection status (Blue) (Gray) Full Empty Battery charge...
-
Page 382: Making A Call
3-2. Using the audio system (Entune Audio) Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing STEP Display the phone screen. (P. 379) STEP Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”... - Page 383 3-2. Using the audio system (Entune Audio) ® ■ For PBAP compatible Bluetooth phones When “Automatic Contact/History Transfer” is set to off STEP Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always” then enable “Automatic Contact/ History Transfer”.
- Page 384 3-2. Using the audio system (Entune Audio) Calling using favorites list You can make a call using numbers registered in the contact. STEP Display the phone screen. (P. 379) STEP Select “Favorites” tab. STEP Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below.
- Page 385 3-2. Using the audio system (Entune Audio) ■ Call history list ● If you make a call to or receive a call from a number registered in the contact, the name is displayed in the call history. ● If you make multiple calls to the same number, only the last call made is displayed in the call history.
-
Page 386: Receiving A Call
3-2. Using the audio system (Entune Audio) Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steering wheel or select To refuse a call Press the switch on the steering wheel or select To adjust the incoming call volume... -
Page 387: Speaking On The Phone
3-2. Using the audio system (Entune Audio) Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice Select “Mute”. - Page 388 3-2. Using the audio system (Entune Audio) ■ Release Tones ● A continuous tone signal is a character string that consists of numbers and the characters p or w. (e.g.056133w0123p#1) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed.
- Page 389 3-2. Using the audio system (Entune Audio) To transfer a call Select “Handset Mode” to on from a hands-free call to a cellular phone call. Select “Handset Mode” to off from a cellular phone call to a hands- free call. Transmit volume setting STEP Select “Transmit Volume”.
- Page 390 3-2. Using the audio system (Entune Audio) ■ Transferring calls ● If you transfer from the cellular phone to hands-free, the hands-free screen will be displayed, and you can operate the system using the screen. ● Transfer method and operation may vary according to the cellular phone used.
-
Page 391: Bluetooth ® Phone Message Function
3-2. Using the audio system (Entune Audio) ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the audio system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. - Page 392 3-2. Using the audio system (Entune Audio) ■ Receiving a message ● Depending on the cellular phone used for receiving messages, or its reg- istration status with the navigation system, some information may not be displayed. ● The pop up screen is separately available for incoming e-mail and SMS/ MMS messages under the following conditions: E-mail: •...
- Page 393 3-2. Using the audio system (Entune Audio) Checking the messages STEP Display the “Message Inbox” screen. (P. 391) STEP Select the desired message from the list. STEP Check that the message is displayed. E-mails: Select “Mark Unread” or “Mark Read” to mark mail unread or read on the mes- sage inbox screen.
- Page 394 3-2. Using the audio system (Entune Audio) ■ Check the messages ® ● Depending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone. ● ® Messages are displayed in the appropriate connected Bluetooth phone’s registered mail address folder.
- Page 395 3-2. Using the audio system (Entune Audio) Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender’s phone number. STEP Display the “Message Inbox” screen. (P. 391) STEP Select the desired message. STEP Select STEP Check that the “Call” screen is displayed. ■...
-
Page 396: Using The Steering Wheel Switches
3-2. Using the audio system (Entune Audio) Using the steering wheel switches The steering wheel switches can be used to operate a connected cel- lular phone. Operating a telephone using the steering wheel switches Volume switch • Increase/Decrease the vol- •... -
Page 397: Bluetooth ® Phone Settings
3-2. Using the audio system (Entune Audio) ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (P. - Page 398 3-2. Using the audio system (Entune Audio) Sound setting STEP Display the “Phone/Message Settings” screen. (P. 397) STEP Select “Sound Settings” on the “Phone/Message Settings” screen. Set the desired ringtone. Adjust the ringtone volume. Adjust the message readout volume. desired incoming SMS/MMS tone.
-
Page 399: Contact/Call History Settings
3-2. Using the audio system (Entune Audio) Contact/Call History Settings ® The contact can be transferred from a Bluetooth phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed. - Page 400 3-2. Using the audio system (Entune Audio) STEP Select the desired item to be set. PBAP compatible ® Bluetooth phones, select to set automatic contact/history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred. Select to update contacts from the connected phone.
- Page 401 3-2. Using the audio system (Entune Audio) Update contacts from phone Operation methods differ between PBAP compatible and PBAP ® incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ■...
- Page 402 3-2. Using the audio system (Entune Audio) ® ■ For PBAP incompatible but OPP compatible Bluetooth Phones STEP Select “Update Contacts from Phone”. ® STEP Transfer the contact data to the system using a Bluetooth phone. This operation may be unnecessary depending on the type of cellu- lar phone.
- Page 403 3-2. Using the audio system (Entune Audio) Registering a new contact to the contact list New contact data can be registered. Up to 4 numbers per person can ® be registered. For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P.
- Page 404 3-2. Using the audio system (Entune Audio) Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P. 399) STEP Select “Edit Contact”. STEP Select the desired contact. STEP Select corresponding to the desired name or number.
- Page 405 3-2. Using the audio system (Entune Audio) Deleting the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P. 399) STEP Select “Delete Contacts”. STEP Select the desired contact and select “Delete”. STEP Select “Yes”...
- Page 406 3-2. Using the audio system (Entune Audio) When 15 contacts have already been registered to the favorites list STEP When 15 contacts have already been registered to the favor- ites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact.
- Page 407 3-2. Using the audio system (Entune Audio) ■ Deleting the contacts in the favorites list STEP Select “Remove Favorite”. STEP Select the desired contacts and select “Remove”. STEP Select “Yes” when the confirmation screen appears. STEP Check that a confirmation screen is displayed when the oper- ation is complete.
- Page 408 3-2. Using the audio system (Entune Audio) Message Settings STEP Display the “Phone/Message Settings” screen. (P. 397) STEP Select “Messaging Settings”. STEP Select the desired item to be set. Set automatic message trans- fer on/off. Set automatic message read- out on/off. Set the SMS/MMS notification popup on/off.
- Page 409 3-2. Using the audio system (Entune Audio) Change the incoming SMS/ MMS display. “Full Screen”: When an SMS/ MMS message is received, the incoming SMS/MMS display screen is displayed and can be operated on the screen. “Drop-Down”: When an SMS/ MMS message is received, a message is displayed on the upper side of the screen.
- Page 410 3-2. Using the audio system (Entune Audio) ■ Displaying the “Messaging Settings” screen in a different way STEP Display the phone screen. (P. 379) STEP Select STEP Select “Settings”. STEP Select “Message Settings”. Phone Display Settings STEP Display the “Phone/Message Settings” screen. (P. 397) STEP Select “Phone Display Settings”.
-
Page 411: What To Do If
be a compati- this system, ® ble Bluetooth check with your cellular phone. The hands-free Toyota dealer system or or the web- ® Bluetooth site. device does not Use a cellular work. The Bluetooth... - Page 412 3-2. Using the audio system (Entune Audio) When registering/connecting a cellular phone Page Symptom Likely cause Solution Cellular This phone system An incorrect Enter the cor- passcode was rect passcode entered on the on the cellular cellular phone. phone. Complete the The registra- registration...
- Page 413 3-2. Using the audio system (Entune Audio) Page Symptom Likely cause Solution Cellular This phone system Another Manually con- ® Bluetooth nect the cellu- device is lar phone you P. 371 already con- wish to use to nected. this system. ®...
- Page 414 3-2. Using the audio system (Entune Audio) Page Symptom Likely cause Solution Cellular This phone system ® Bluetooth Enable the ® function is not Bluetooth enabled on the function on the cellular phone. cellular phone. Delete the “Please check existing regis- your device set- tration informa-...
- Page 415 be compatible this system, with transfer- check with your ring contact Toyota dealer data. or the web- site. Automatic con- Set automatic tact transfer contact transfer Contact data ...
- Page 416 3-2. Using the audio system (Entune Audio) ® When using the Bluetooth message function (if equipped) Page Symptom Likely cause Solution Cellular This phone system Enable mes- sage transfer Message trans- on the cellular fer is not phone (approve enabled on the message trans- cellular phone.
- Page 417 3-2. Using the audio system (Entune Audio) In other situations Page Symptom Likely cause Solution Cellular This phone system ® The Bluetooth connection sta- tus is displayed at the top of the screen each time the engine switch is turned To turn off the Connection to the “ACC”...
- Page 418 : http://www.toyota.com/entune/ : For details, refer to the owner’s manual that came with the cellular phone. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 419: Bluetooth
3-2. Using the audio system (Entune Audio) ® Bluetooth ■ ® When using the Bluetooth audio system ● In the following conditions, the system may not function. • If the portable audio player is turned off • If the portable audio player is not connected •... - Page 420 3-2. Using the audio system (Entune Audio) ■ Conditions under which the system will not operate ● ® If using a cellular phone that does not support Bluetooth ● If the cellular phone is turned off ● If you are outside of cellular phone service coverage ●...
- Page 421 3-2. Using the audio system (Entune Audio) ® ■ When using the Bluetooth audio and hands-free system at the same time The following problems may occur. ® ● The Bluetooth audio connection may be interrupted. ® ● Noise may be heard during Bluetooth audio playback.
- Page 422 3-2. Using the audio system (Entune Audio) ■ Compatible models ® The Bluetooth audio system supports portable audio players with the fol- lowing specifications ® ● Bluetooth specifications: Ver. 1.1, or higher (Recommended: Ver. 3.0+EDR or higher) ● Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver.
- Page 423 3-2. Using the audio system (Entune Audio) ■ Certification For vehicles sold in the U.S.A., Hawaii, Guam and Puerto Rico For vehicles sold in Canada VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 424 3-2. Using the audio system (Entune Audio) ■ Reconnecting the portable audio player If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system automatically reconnects the portable audio player.
- Page 425 3-2. Using the audio system (Entune Audio) NOTICE ■ When leaving the vehicle Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.
-
Page 426: Voice Command System
3-2. Using the audio system (Entune Audio) Voice command system The voice command system enables the hands-free system to be operated using voice commands. Using the voice command system Press the talk switch. STEP To cancel the voice command system, press and hold the talk switch. - Page 427 3-2. Using the audio system (Entune Audio) ■ Microphone P. 380 ■ When using the microphone ● It is unnecessary to speak directly into the microphone when giving a command. ● Voice commands may not be recognized if: • They are spoken too quickly. •...
- Page 428 3-2. Using the audio system (Entune Audio) Casual speech recognization Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the proce- dure and directly state the desired operation.
- Page 429 3-2. Using the audio system (Entune Audio) Command list Some recognizable voice commands and their actions are shown below as examples. Basic Command Action Prompts voice guidance to offer examples of “Help” commands or operation methods “Go Back” Returns to the previous screen Phone Command Action...
-
Page 430: Using The Interior Lights
3-3. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Due to the function of the system, the lights shown in the following illustration automatically turn on/off accord-... -
Page 431: Personal/Interior Light Main Switch
3-3. Using the interior lights Personal/interior light main switch Personal/interior lights “ENGINE START STOP” switch light (vehicles with smart key system) or engine switch light (vehicles without smart key sys- tem) Door courtesy lights Luggage compartment light Outer foot lights Personal/interior light main switch “OFF”... -
Page 432: Personal/Interior Lights And Luggage Compartment Light
3-3. Using the interior lights Personal/interior lights and luggage compartment light Personal/interior lights Front On/off The illuminated entry system is activated even if the light is turned off when the personal/inte- rior light main switch is in door position. Rear On/off The illuminated entry system is activated even if the light is... - Page 433 3-3. Using the interior lights ■ To prevent the battery from being discharged Vehicles with smart key system If the personal/interior lights and “ENGINE START STOP” switch light remain on when the door is not fully closed and the personal/interior light main switch is in door position, the lights will go off automatically after 20 minutes.
-
Page 434: Using The Storage Features
3-4. Using the storage features List of storage features Bottle holders Door pockets Auxiliary boxes Overhead console Console boxes Glove box Cup holders VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 435: Glove Box
3-4. Using the storage features Glove box CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●... -
Page 436: Console Boxes
3-4. Using the storage features Console boxes Console boxes Front Press the tab and slide to open. Rear Pull up the lever to release the lock. Slide the armrest fully rear- ward. Lift the armrest to open. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 437 3-4. Using the storage features Console boxes ■ When using the rear console box lid as an armrest If necessary, the console box lid can slide forward. Pull the lid forward while pulling up the lever. ■ Tray in the rear console box The tray slides forward/backward and can be removed.
-
Page 438: Overhead Console
3-4. Using the storage features Overhead console Overhead console Push the lid. The overhead console is useful temporarily storing small items. CAUTION ■ While driving Do not leave the overhead console open. Items may fall out and cause injury. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 439: Cup Holders
3-4. Using the storage features Cup holders Cup holders Front Rear Pull down the armrest and open the lid. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 440 3-4. Using the storage features Cup holders ■ Adjusting size of the front cup holder Remove the adapter. CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
-
Page 441: Bottle Holders
3-4. Using the storage features Bottle holders Bottle holders For front seats For rear seats NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. -
Page 442: Auxiliary Boxes
3-4. Using the storage features Auxiliary boxes Auxiliary boxes Type A (driver’s side instrument panel) Push down the knob. Type B (front console) Lift the lid. Type C (front console) Lift the lid. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 443: Auxiliary Box
3-4. Using the storage features Auxiliary boxes Type D (front passenger’s side instrument panel) ■ Coin holder (type A) Nickels, quarters and dimes can be stored separately. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 444: Auxiliary Box
3-4. Using the storage features Auxiliary boxes ■ Cable pass-through (type B and C) Type B The auxiliary boxes of the front console are provided with a hole that allows cables to be passed from the power outlet and AUX port/USB port. For type B, push in the push bar before routing the cables. -
Page 445: Other Interior Features
3-5. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 446: Vanity Mirror
3-5. Other interior features Vanity mirror Slide the cover. The light turns on when the cover is opened. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 447: Power Outlets
3-5. Other interior features Power outlets The power outlets can be used for 12V accessories that run on less than 10A. Console box Front passenger’s side instrument panel Luggage compartment VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 448 3-5. Other interior features ■ The power outlets can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. NOTICE ■...
-
Page 449: Seat Heaters
3-5. Other interior features Seat heaters For driver’s seat For front passenger’s seat The indicator light comes on. Adjusts the seat tempera- ture The further you turn the dial upward, the warmer the seat becomes. ■ The seat heaters can be used when Vehicles with smart key system The “ENGINE START STOP”... - Page 450 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
-
Page 451: Armrest
3-5. Other interior features Armrest Front Lift the lever up and slide the armrest. Rear Pull the armrest down for use. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 452: Assist Grips (Folding Type)
3-5. Other interior features Assist grips (folding type) An assist grip installed on the ceiling can be used to support your body while sitting on the seat. CAUTION ■ Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat. -
Page 453: Floor Mats
3-5. Other interior features Floor mats Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks STEP (clips) into the floor mat eye- lets. - Page 454 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
-
Page 455: Luggage Compartment Features
3-5. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Shopping bag hooks ■ Auxiliary box Lift the right side deck board. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 456 3-5. Other interior features ■ Luggage cover Pull out the luggage cover and hook it on the anchors. Removing luggage cover Retract the cover and release both ends, then lift it out. After removing the luggage cover, place it somewhere other than the passenger compartment.
-
Page 457: Garage Door Opener
3-5. Other interior features Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. The garage door opener (HomeLink Universal Transceiver) is manufac- ... - Page 458 3-5. Other interior features ® ■ Programming HomeLink Point the remote control trans- STEP mitter for the device 1 to 3 in. (25 to 75 mm) from the HomeLink buttons. Keep the HomeLink indicator light in view while programming. Press and hold one of the STEP ...
- Page 459 3-5. Other interior features Test the HomeLink operation STEP by pressing the newly pro- grammed button. If a HomeLink button has been programmed for a garage door, check to see if the garage door opens and closes. If the garage door does not operate, see if your remote control transmitter is of the rolling code type.
- Page 460 3-5. Other interior features ■ Programming a rolling code system If your device is rolling code equipped, follow the steps under the heading “Programming HomeLink ” before proceeding with the steps listed below. STEP Locate the learn button on the ceiling mounted garage door opener motor.
- Page 461 the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button The individual HomeLink buttons cannot be erased but can be reprogrammed.
- Page 462 3-5. Other interior features ® Operating HomeLink Press the appropriate HomeLink button. The HomeLink indicator light should come on. The HomeLink compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed. ®...
- Page 463 3-5. Other interior features ■ Before programming ● Install a new battery in the remote control transmitter. ● The battery side of the remote control transmitter must be pointed away from the HomeLink button. ■ Certification for the garage door opener FCC ID: CB2300NHL3 FCC ID: CB2281AHL4 NOTE:...
-
Page 464: Compass
3-5. Other interior features Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, push and hold “AUTO” for longer than 3 seconds. ■... - Page 465 3-5. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
- Page 466 3-5. Other interior features ■ Deviation calibration STEP Stop the vehicle where it is safe to drive in a circle. Push and hold “AUTO” until a STEP number (1 to 15) appears on the compass display. STEP Press “AUTO”, and referring to the map above, select the number of the zone where you are.
- Page 467 3-5. Other interior features ■ Conditions unfavorable to correct operation The compass may not show the correct direction in the following conditions: ● The vehicle is stopped immediately after turning. ● The vehicle is on an inclined surface. ● The vehicle is in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).
- Page 468 3-5. Other interior features NOTICE ■ To avoid the compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. ■ To ensure normal operation of the compass ●...
-
Page 469: Maintenance And Care
Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior..470 Cleaning and protecting the vehicle interior..473 4-2. Maintenance Maintenance requirements ....476 General maintenance..479 Emission inspection and maintenance (I/M) programs......482 4-3. Do-it-yourself maintenance Do-it-yourself service precautions .... -
Page 470: Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. - Page 471 4-1. Maintenance and care ■ High pressure car washes ● Do not allow the nozzles of the car wash to come within close proximity of the windows. ● Before car wash, check that the fuel filler door is closed. ■ Aluminum wheels ●...
- Page 472 ■ If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. ■ Cleaning the exterior lights ●...
-
Page 473: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water. - Page 474 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
- Page 475 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces. • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, or bleach.
-
Page 476: Maintenance
It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage. - Page 477 Continue to press and hold the trip meter reset button until the trip meter displays “000000”. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information.
- Page 478 4-2. Maintenance CAUTION ■ Warning in handling of battery, oils, fuels, and fluids ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
-
Page 479: General Maintenance
“Scheduled Maintenance Guide”, “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items... - Page 480 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven pedal Accelerator pedal effort or catching)? Automatic transmission • Can the vehicle be held securely on an “Park” mechanism incline with the shift lever in “P”? • Moves smoothly? Brake pedal •...
- Page 481 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after parking? • Is the tire inflation pressure correct? • The tires should not be damaged or excessively worn.
-
Page 482: Emission Inspection And Maintenance (I/M) Programs
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■... -
Page 483: Do-It-Yourself Maintenance
Brake fluid level (P. 500) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology. - Page 484 4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent Engine oil level (P. 493) • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating Fuses (P. 527) as original ...
- Page 485 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
- Page 486 4-3. Do-it-yourself maintenance CAUTION ■ When working near the electric cooling fan or radiator grille Vehicles with smart key system Be sure the “ENGINE START STOP” switch is off. With the “ENGINE START STOP” switch in IGNITION ON mode, the electric cooling fan may automatically start to run if the air conditioning is on and/or if the coolant temperature is high.
-
Page 487: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the hood catch and lift the STEP hood. Hold the hood open by insert- STEP ing the supporting rod into the slot. - Page 488 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
-
Page 489: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear (2WD models) Rear (AWD models) VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 490 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
-
Page 491: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment 2GR-FE engine Engine coolant reservoir Battery (P. 502) (P. 497) Fuse box (P. 527) Engine oil filler cap Electric cooling fans (P. 495) Condenser (P. 499) Engine oil level dipstick Radiator (P. 499) (P. 493) Washer fluid tank Brake fluid reservoir (P. - Page 492 4-3. Do-it-yourself maintenance 1AR-FE engine Engine coolant reservoir Battery (P. 502) (P. 497) Fuse box (P. 527) Engine oil filler cap Electric cooling fans (P. 495) Condenser (P. 499) Engine oil level dipstick Radiator (P. 499) (P. 493) Washer fluid tank Brake fluid reservoir (P.
- Page 493 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine.
- Page 494 4-3. Do-it-yourself maintenance STEP Holding a rag under the end, pull the dipstick out and check the oil level. Flat dipstick Normal Excessive The shape of the dipstick may dif- fer depending on the type of vehi- cle or engine. Non-flat dipstick Normal Excessive...
- Page 495 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
- Page 496 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●...
- Page 497 4-3. Do-it-yourself maintenance NOTICE ■ To prevent serious engine damage Check the oil level on regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ●...
- Page 498 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. ■...
- Page 499 Radiator and condenser Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■...
- Page 500 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items Clean funnel...
- Page 501 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi- ciency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces.
- Page 502 4-3. Do-it-yourself maintenance Battery ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 503 4-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to discon- nect the ground cable. ● Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
- Page 504 4-3. Do-it-yourself maintenance CAUTION ■ Where to safely charge the battery Always charge the battery in an open area. Do not charge the battery in a garage or closed room where there is not sufficient ventilation. ■ How to recharge the battery Only perform a slow charge (5 A or less).
- Page 505 4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the low windshield washer fluid level warning light comes on, the washer tank may be empty. Add washer fluid. CAUTION ■ When refilling the washer fluid Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc.
-
Page 506: Tires
■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection. VENZA_OM_OM73023U_(U) - Page 507 4-3. Do-it-yourself maintenance ■ The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (P. 567) The compact spare tire is not equipped with a tire pressure warning valve and transmitter.
- Page 508 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
- Page 509 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
- Page 510 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A., Guam, Saipan, American Samoa and Puerto Rico FCC ID: PAXPMV107J NOTE This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 511 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted, or bias-ply tires).
- Page 512 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire (P.
-
Page 513: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (P. 622) VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 514 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the gauge gradations. STEP If the tire inflation pressure is not at the recommended level, adjust the pressure.
- Page 515 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
- Page 516 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury: ● Excessive wear ● Uneven wear ●...
-
Page 517: Wheels
● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km). - Page 518 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your Toyota are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
- Page 519 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
-
Page 520: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP Vehicles with smart key system: Turn the “ENGINE START STOP” switch off. Vehicles without smart key system: Turn the engine switch to the “LOCK”... - Page 521 4-3. Do-it-yourself maintenance Remove the filter cover. STEP Remove the air conditioning STEP filter and replace it with a new one. The “UP” marks shown on the filter should be pointing up. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 522 4-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow early replacement may be required. (For scheduled maintenance information, refer to the “Scheduled Maintenance Guide”, “Owner’s Manual Supplement”.) ■...
-
Page 523: Key Battery
4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with rag.) ●... - Page 524 4-3. Do-it-yourself maintenance Remove the depleted battery. STEP Insert a new battery with the “+” terminal facing up. ■ Replacing the battery (vehicles without smart key system) Remove the cover. STEP Remove the module. STEP VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 525 Use a CR1632 (vehicles with smart key system), or CR2025 (vehicles without smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by a Toyota dealer.
- Page 526 4-3. Do-it-yourself maintenance CAUTION ■ Removed battery and other parts These parts are small and if swallowed by a child they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. NOTICE ■...
-
Page 527: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles with smart key system: Turn the “ENGINE START STOP” switch off. Vehicles without smart key system: Turn the engine switch to the “LOCK”... - Page 528 The amperage rating can be found on the fuse box lid. ITY42C012 Type B Normal fuse Blown fuse Contact your Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 529 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse block ITI43V079a Back of the cover VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 530 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Outside rear view mirrors MIRROR 10 A (driving position memory) DEICER 20 A Windshield wiper de-icer Multiport fuel injection system/ INJ NO.1 15 A sequential multiport fuel injection system INJ NO.2 15 A Igniter system Multiport fuel injection system/ EFI NO.2 15 A...
- Page 531 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Smart key system, multiport fuel injection system/sequential mul- EFI NO.1 10 A tiport fuel injection system, auto- matic transmission Multiport fuel injection system/ sequential multiport fuel injection ETCS 10 A system, electronic throttle con- trol system TURN-HAZ 15 A...
- Page 532 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Gauges and meters, clock, audio system, main body ECU, wireless remote control, smart ECU-B 10 A key system, power back door, front passenger occupant clas- sification system Audio system, Entune Premium RADIO-B 20 A Audio with Navigation SPARE 7.5 A...
- Page 533 4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel Fuse Ampere Circuit RR DOOR 20 A Power windows RL DOOR 20 A Power windows FR DOOR 20 A Power windows FR FOG 15 A Fog lights 7.5 A On-board diagnosis system FL DOOR 20 A Power windows...
- Page 534 4-3. Do-it-yourself maintenance Fuse Ampere Circuit SEAT HTR 20 A Seat heaters S/ROOF 25 A Electric moon roof Side marker lights, tail lights, TAIL 10 A license plate light Emergency flashers, audio sys- tem, clock, instrument panel light control, glove box light, console PANEL box light, steering switches, out- side rear view mirror defoggers,...
- Page 535 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Entune Premium Audio with Navigation, back-up lights, GAUGE NO.1 10 A charging system, emergency flashers, multi-information dis- play FR WIPER 30 A Windshield wipers RR WIPER 15 A Rear window wiper Multiport fuel injection system/ sequential multiport fuel injection system, steering lock system, 10 A...
- Page 536 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. ●...
-
Page 537: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. - Page 538 4-3. Do-it-yourself maintenance Vehicles with discharge headlights Front turn signal light Front side marker light Front fog light ■ Rear bulb locations Stop/tail and rear side Tail light marker lights Rear turn signal light Back-up light License plate light VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 539 4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams (vehicles with halogen headlights) Turn the bulb base counterclock- STEP wise. Unplug connector while STEP pushing the lock release. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 540 4-3. Do-it-yourself maintenance Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
- Page 541 4-3. Do-it-yourself maintenance ■ Headlight high beams and daytime running lights (vehicles with halogen headlights) Unplug connector while STEP pushing the lock release. Turn the bulb base counterclock- STEP wise. Replace the light bulb, and install STEP the light bulb. Align the 3 tabs on the light bulb with the mounting, and insert.
- Page 542 4-3. Do-it-yourself maintenance Turn and secure the bulb base. STEP STEP Install the connector. Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 543 4-3. Do-it-yourself maintenance ■ Front fog lights Remove the engine under cover STEP bolt and pull down the engine under cover. Turn the bulb base counterclock- STEP wise. Unplug connector while STEP pushing the lock release. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 544 4-3. Do-it-yourself maintenance Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the front fog lights on once and visu- ally confirm that no light is leaking through the mounting.
- Page 545 4-3. Do-it-yourself maintenance ■ Front turn signal lights (vehicles with discharge headlights) Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 546 4-3. Do-it-yourself maintenance ■ Front side marker lights STEP Turn the bulb base counterclockwise. Vehicles with halogen headlights Vehicles with discharge headlights Remove the light bulb. STEP VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 547 4-3. Do-it-yourself maintenance ■ Rear turn signal lights, stop/tail and rear side marker lights Left side Open the back door and remove STEP the cover. To protect the cover, place a rag between the flathead screwdriver and cover as shown in the illus- trations.
- Page 548 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Stop/tail and rear side marker lights Rear turn signal light ■ Tail and back-up lights Open the back door and remove STEP the trim board. Turn the bulb base counterclock- STEP wise. Back-up light Tail light Remove the light bulb.
- Page 549 4-3. Do-it-yourself maintenance ■ License plate light Open the back door and remove STEP the trim board. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 550 LED light bulbs The daytime running/parking rights (vehicles with discharge headlights), high mounted stoplight and foot lights consist of a number of LEDs. If any LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■...
- Page 551 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
- Page 552 4-3. Do-it-yourself maintenance CAUTION ■ Discharge headlights (if equipped) ● Contact your Toyota dealer before replacing the discharge headlights (including light bulbs). ● Do not touch the discharge headlight’s high voltage socket when the head- lights are turned on. An extremely high voltage of 30000 V will be discharged and could result in serious injury or death by electric shock.
- Page 553 When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers ..554 If a warning light turns If your vehicle needs on or a warning to be towed ....555 buzzer sounds....564 If you think something If a warning message is is wrong ......
-
Page 554: Essential Information
5-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. -
Page 555: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a lift-type truck or a flatbed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws. - Page 556 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel lift-type truck From the front (2WD models) Release the parking brake. From the front (AWD models) Use a towing dolly under the rear wheels.
- Page 557 5-1. Essential information From the rear Use a towing dolly under the front wheels. Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45. Do not overly tighten the tie downs or the vehicle may be damaged.
- Page 558 5-1. Essential information CAUTION Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle 2WD models Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
- Page 559 5-1. Essential information CAUTION ■ While towing ● When towing using cables or chains, avoid sudden starts, etc. which place excessive stress on the towing eyelets, cables or chains. The towing eye- lets, cables or chains may become damaged, broken debris may hit peo- ple and cause serious damage.
- Page 560 5-1. Essential information NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck (2WD models) When raising the vehicle from the rear, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clear- ance, the vehicle could be damaged while being towed from the rear.
-
Page 561: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.) - Page 562 5-1. Essential information ■ Operational symptoms ● Engine missing, stumbling or running rough ● Appreciable loss of power ● Vehicle pulls heavily to one side when braking ● Vehicle pulls heavily to one side when driving on a level road ●...
- Page 563 5-1. Essential information If noise can be heard from under vehicle Approximately five hours after the engine is turned off, you may hear sound coming from under the vehicle for several minutes. This is the sound of a fuel evaporation leakage check and, it does not indicate a malfunction.
-
Page 564: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated. -
Page 565: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer) •... - Page 566 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Malfunction in: •...
- Page 567 5-2. Steps to take in an emergency Warning light Warning light/Details SRS warning light Malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner system. ABS warning light (U.S.A.) Malfunction in: •...
- Page 568 • Natural causes (P. 573) even if the tire inflation • Flat tire (P. 579) pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer.
- Page 569 When the light comes on: Malfunction in the Active Have the system checked Torque Control 4WD sys- by your Toyota dealer. tem. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 570 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Maintenance required reminder light Indicates that mainte- nance is requires accord- ing to the driven distance on the maintenance schedule. Illuminates for about 3 sec- onds and then flashes for about 15 seconds approxi- If necessary, perform main- mately 4500 miles...
- Page 571 5-2. Steps to take in an emergency Follow the correction procedures. (smart key system) After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning light...
- Page 572 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning light Indicates that the Turn the driver’s door has “ENGINE been opened or START closed with the shift STOP” lever in “P”, the switch off Once...
- Page 573 The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. ■ Key reminder buzzer (vehicles without smart key system) The buzzer indicates that the key has not been removed with the engine off and the driver’s door opened.
- Page 574 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sen- sors, driver’s seat position sensor, driver’s seat belt buckle switch, front pas- senger occupant classification system (ECU and sensors), “AIR BAG ON”...
- Page 575 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
- Page 576 If the tire pressure warning light frequently comes on after blinking for 1 minute when the “ENGINE START STOP” switch is turned to IGNI- TION ON mode, have it checked by your Toyota dealer. Vehicles without smart key system If the tire pressure warning light comes on after blinking 1 minute fre- quently when the engine switch is turned to the “ON”...
- Page 577 5-2. Steps to take in an emergency CAUTION ■ If a blowout or sudden air loss should occur The tire pressure warning system may not activate immediately. ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
- Page 578 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
-
Page 579: If A Warning Message Is Displayed
■ If the warning message is shown again after its correction procedure has been performed Contact your Toyota dealer as soon as possible. : If equipped VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 580: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●... - Page 581 5-2. Steps to take in an emergency ■ Compact spare tire The compact spare tire saves space in your luggage compart- ment, and its lighter weight helps to enhance fuel economy and permits easier installation in case of a flat tire. The compact spare tire is designed for temporary emer- gency use only.
- Page 582 5-2. Steps to take in an emergency Taking out the spare tire Loosen the center fastener that secures the spare tire. Replacing a flat tire Chock the tires. STEP Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire...
- Page 583 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground.
- Page 584 5-2. Steps to take in an emergency Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur-...
- Page 585 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Stow the flat tire, tire jack and all tools. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 586 5-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire inflation pressure of the compact spare tire.
- Page 587 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
- Page 588 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire ● Do not touch the disc wheels or the area around the brakes immedi- ately after the vehicle has been driven. After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot.
- Page 589 5-2. Steps to take in an emergency CAUTION ■ When using the compact spare tire ● Remember that your compact spare tire is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
- Page 590 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire (P.
-
Page 591: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (P. 173, 177) or releasing the steering lock (P. 175, 178), confirm the following points. ■... - Page 592 ● The battery may be discharged. (P. 598) ● There may be a malfunction in the steering lock system (vehi- cles with smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. VENZA_OM_OM73023U_(U)
- Page 593 Press and hold the “ENGINE START STOP” switch for about 15 seconds while depressing the brake pedal firmly. Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by your Toyota dealer. VENZA_OM_OM73023U_(U)
-
Page 594: If The Shift Lever Cannot Be Shifted From "P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted. -
Page 595: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring the other key and the key number stamped on the key number plate. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... -
Page 596: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Key System)
5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) If communication between the electronic key and vehicle is inter- rupted (P. 30) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used. - Page 597 5-2. Steps to take in an emergency Starting the engine STEP Shift the shift lever to “P” and apply the brakes. Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. An alarm will sound to indicate that the start function cannot detect the electronic key that is touched to the “ENGINE START...
- Page 598 5-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to “P” and press the “ENGINE START STOP” switch as you normally do when stopping the engine. ■ Replacing the key battery As this above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery depletes.
-
Page 599: If The Battery Is Discharged
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12 volt battery, you can jump start your Toyota following the steps below. - Page 600 5-2. Steps to take in an emergency 1AR-FE engine Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicles as shown in the illustration.
- Page 601 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
- Page 602 5-2. Steps to take in an emergency ■ Charging the battery The electricity stored in the battery will discharge gradually even when the vehicle is not in use, due to natural discharge and the draining effects of cer- tain electrical appliances. If the vehicle is left for a long time, the battery may discharge, and the engine may be unable to start.
-
Page 603: If Your Vehicle Overheats
5-2. Steps to take in an emergency CAUTION ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following pre- cautions when handling the battery: ● When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body. - Page 604 (radia- tor) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if STEP it is between the “F” and “L” lines on the reservoir.
- Page 605 Stop the engine immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 606 5-2. Steps to take in an emergency CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injury such as burns.
-
Page 607: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and shift the shift lever in “P”. - Page 608 5-2. Steps to take in an emergency CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur- rounding area is clear, to avoid striking other vehicles, objects or persons. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
-
Page 609: If Your Vehicle Has To Be Stopped In An Emergency
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly... - Page 610 5-2. Steps to take in an emergency Vehicles with a smart key sys- STEP tem: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecu- tive seconds or more, or press Press and hold for 2 seconds or more, it briefly 3 times or more in or press briefly 3 times or more succession.
- Page 611 5-2. Steps to take in an emergency VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 612: Maintenance Data (Fuel, Oil Level, Etc.)
Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.) ..612 Fuel information ....626 Tire information ....630 6-2. Customization Customizable features ......645 6-3. Initialization Items to initialize ....655 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 613 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 189.0 in. (4800 mm) Overall width 75.0 in. (1905 mm) Overall height 63.4 in. (1610 mm) Wheelbase 109.3 in. (2775 mm) Front 64.2 in. (1630 mm) Tread 64.4 in.
- Page 614 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
- Page 615 6-1. Specifications ■ Engine number 2GR-FE engine The engine number is stamped on the engine block as shown. 1AR-FE engine VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 616 6-1. Specifications Engine Model 2GR-FE, 1AR-FE Type 2GR-FE engine 6-cylinder V type, 4-cycle, gasoline 1AR-FE engine 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.70 3.27 in. (94.0 83.0 mm) 2GR-FE engine 3.54 4.13 in. (90.0 105.0 mm) 1AR-FE engine Displacement 2GR-FE engine...
- Page 617 ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
- Page 618 6-1. Specifications Recommended viscosity: SAE 0W-20 SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced Outside temperature with SAE 0W-20 at the next oil change.
- Page 619 (10.1 L, 8.9 Imp.qt.) 1AR-FE engine 7.5 qt. (7.1 L, 6.2 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non- Coolant type silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technol- Do not use plain water alone.
- Page 620 5 A max. Rear differential (AWD models) Oil capacity 0.52 qt. (0.50 L, 0.44 Imp.qt.) Toyota Genuine Differential gear oil LT Oil type and viscosity 75W-85 GL-5 or equivalent VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 621 NOTICE ■ Automatic transaxle fluid type Using transaxle fluid other than “Toyota Genuine ATF WS” may cause dete- rioration in shift quality, locking up of your transaxle accompanied by vibra- tion, and ultimately damage the transaxle of your vehicle. Transfer (AWD models) Oil capacity 0.84 qt.
- Page 622 6-1. Specifications Brakes Pedal clearance 1.1 in. (28 mm) Min. 0.12 in. (1.0 3.0 mm) Pedal free play 0.04 Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) 6 clicks Parking brake adjustment Fluid type SAE J1703 or FMVSS No.
- Page 623 6-1. Specifications Tires and wheels Type A Tire size P245/50R20 102H Driving under normal conditions Front tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Rear tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Tire inflation pressure Driving at high speeds above 99 mph (Recommended cold tire (160 km/h) (in countries where such inflation pressure)
- Page 624 6-1. Specifications Type B Tire size P245/55R19 103S Driving under normal conditions Front tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Rear tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Tire inflation pressure Driving at high speeds above 99 mph (Recommended cold tire (160 km/h) (in countries where such inflation pressure)
- Page 625 6-1. Specifications Light bulbs Bulb Light Bulbs Type Headlights Vehicles with discharge headlights Low and high beam Vehicles with halogen headlights Low beam High beam 9005 Front turn signal lights 7444 (vehicles with discharge headlights) Front turn signal/parking lights 3457 30/8 (vehicles with halogen headlights)
- Page 626 6-1. Specifications Bulb Light Bulbs Type Front interior light Front personal lights Rear personal/interior lights Interior Vanity lights Door courtesy lights Glove box light Luggage compartment light A: D4S discharge bulbs D: Wedge base bulbs (amber) B: H11 halogen bulbs E: Wedge base bulbs (clear) C: HB3 halogen bulbs...
-
Page 627: Fuel Information
ASTM D4814 in the U.S.A.. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ●... - Page 628 EPA’s lowest additives con- centration program. ● Toyota strongly recommends the use of Top Tier Detergent Gasoline. For more information on Top Tier Detergent Gasoline and a list of marketers, please go to the official website www.toptiergas.com.
- Page 629 15% ethanol). (85% ethanol) ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ● Toyota DOES NOT recommend the use of gasoline containing methanol.
- Page 630 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
-
Page 631: Tire Information
6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire Tire size (P. 633) DOT and Tire Identification Number (TIN) (P. 632) VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 632 6-1. Specifications Location of treadwear indicators (P. 506) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Summer tires or all season tires (P. 509) An all season tire has “M+S” on the sidewall. A tire not marked “M+S”...
- Page 633 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
- Page 634 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
- Page 635 6-1. Specifications ■ Tire dimensions Section width Tire height Wheel diameter Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber ITY61C013 Carcass Rim lines Bead wires Chafer VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 636 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
- Page 637 6-1. Specifications ■ Traction AA, A, B, C The traction grades, from highest to lowest, are AA, A, B and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
- Page 638 6-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation parked for three hours or more, or has not pressure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a Maximum inflation...
- Page 639 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
- Page 640 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined Vehicle maximum load by distributing to each axle its share of the on the tire maximum loaded vehicle weight, and dividing by two The load on an individual tire that is determined by distributing to each axle its share of curb Vehicle normal load weight, accessory weight, and normal occu-...
- Page 641 6-1. Specifications Tire related term Meaning Cord The strands forming the plies in the tire The parting of cords from adjacent rubber com- Cord separation pounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the...
- Page 642 6-1. Specifications Tire related term Meaning (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or Intended outboard deeper than the same molding on the other sidewall sidewall of the tire, or (b)The outward facing sidewall of asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle...
- Page 643 6-1. Specifications Tire related term Meaning A tire intended for use on passenger cars, mul- tipurpose passenger vehicles, and trucks, that Passenger car tire have a gross vehicle weight rating (GVWR) of 10,000 lb. or less. A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies...
- Page 644 6-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Snow tire Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and which...
- Page 645 6-1. Specifications : Table 1 Occupant loading and distribution for vehicle normal load for various designated seating capacities Designated seating Occupant distribution in Vehicle normal load, capacity, Number of a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10...
-
Page 646: Customization
Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customizable features Vehicles with TFT type multi-information display: Some function settings can be changed by operating the multi-information display. - Page 647 6-2. Customization Default Customized Item Function setting setting Smart key system — O Smart key system Select doors to Driver’s All doors — O (P. 30) unlock door Wireless remote — O control Driver’s door unlocked in All doors Unlocking operation one step, unlocked in Wireless...
- Page 648 6-2. Customization Default Customized Item Function setting setting Operation signal (Emergency flashers) Level 1 to 6 Operation signal Level 7 — O Smart key (Buzzer) system (P. 30) and wireless Time elapsed before remote control automatic door lock (P. 45) function is activated 60 seconds 30 seconds...
- Page 649 6-2. Customization Default Customized Item Function setting setting Driver’s door unlocked in All doors Unlocking using one step, all unlocked in — O a key doors one step unlocked in two step Speed-detecting automatic door lock function Door lock (P. 50) Shifting the shift lever to position other than “P”...
- Page 650 6-2. Customization Default Customized Item Function setting setting Light sensor Level 3 Level 1 to 5 — O sensitivity Daytime running light — O system (U.S.A. only) Automatic High Beam Automatic light (if equipped) control system (P. 212) 0 seconds Time elapsed before headlights automatically turn off...
- Page 651 6-2. Customization Default Customized Item Function setting setting 7.5 seconds Time period before 15 seconds lights turn off 30 seconds Vehicles with smart key system: Operation after the “ENGINE START STOP” switch is turned off — O Vehicles without smart key system: Operation after the engine switch is Illumination...
- Page 652 6-2. Customization Default Customized Item Function setting setting Seat belt Vehicle speed linked reminder seat belt reminder — O (P. 567) buzzer Rear window Auto Power — O Up/Down window (P. 96) Auto Up function — O VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 653 6-2. Customization Customizing the features by using the multi-information display (vehicles with TFT type multi-information display) Press the “SETUP” button while STEP the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 10 seconds, the display will revert to the previous screen.
- Page 654 6-2. Customization Select the setting you wish to STEP change by pressing the “INFO” or “SETUP” button, and press the “SELECT RESET” button. The illustration assumes that STEP “Door” was chosen in The current setting is indicated by yellow text. If you select “Return”...
- Page 655 6-2. Customization ■ Restoring default settings Press the “SETUP” button while STEP the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 10 seconds, the display will revert to the previous screen. Select “Default Settings”...
-
Page 656: Initialization
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or changing the Power back door battery P. - Page 657 6-3. Initialization VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 658: For Owners
For owners Reporting safety defects for U.S. owners ....658 Seat belt instructions for Canadian owners (in French) ..... 659 SRS airbag instructions for Canadian owners (in French) ..... 661 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 659 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
-
Page 660: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 661 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 662: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :... - Page 663 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 664 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 665 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 666 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 667 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 668 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 669 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 670 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 671 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 672 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 673 VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
-
Page 674: Abbreviation List
Index Abbreviation list ..... 674 Alphabetical index....676 What to do if......685 For vehicles with an Entune Premium Audio with Navigation or Entune Audio Plus, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL” information regarding the equipment listed below. •... - Page 675 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2-Wheel Drive 4-Wheel Drive Anti-lock Brake System Accessory Automatic Locking Retractor Auxiliary All-Wheel Drive Air Conditioning Child Restraint System ECON Economy Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Rating GCWR Gross Combination Weight Rating...
- Page 676 Abbreviation list ABBREVIATIONS MEANING On Board Diagnostics PASS Passenger Power Power Steering Supplemental Restraint System TEMP Temperature Thin Film Transistor Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Vehicle Identification Number Vehicle Stability Control VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 677 Alphabetical index Alphabetical index Audio system Air conditioning filter....520 (Entune Audio)....... 318 Automatic air conditioning Basic Audio Operations ..326 system ........306 CD player ......343 ABS ...........256 iPod........350 ® Active head restraint ....68 Listening to Bluetooth Active Torque Control 4WD Audio ........
- Page 678 Alphabetical index ® Bluetooth ....... 419 Child safety Wireless communication ..363 Airbag precautions ....128 ® Bluetooth audio..... 377 Back door precautions ....61 Bottle holder ......441 Battery precautions ..504, 526 Brake Child-protectors.......52 Fluid........500 Child restraint system....140 Parking brake ....... 186 How your child should wear Brake assist ......
- Page 679 Alphabetical index Daytime running light Emergency, in case of system ........214 If a warning message is Defogger displayed ......578 Rear window ......316 If the electronic key does Dimension.........612 not operate properly ... 595 Dinghy towing ......302 If the engine will not start ..590 Display If the shift lever cannot be Fuel consumption...
- Page 680 Alphabetical index Engine coolant temperature Fuel gauge ........188 Capacity ........615 Engine immobilizer system..109 Fuel gauge ......188 Engine oil Fuel pump shut off system ..564 Capacity ....... 616 Information ......626 Checking ......493 Refueling .......105 Preparing and checking Type ........626 before winter ......
- Page 681 Alphabetical index I/M test........482 Language Identification Multi-information Engine ........614 display ......194, 645 Vehicle ........613 Licence plate lights Ignition Replacing light bulbs..... 549 Engine switch ....173, 177 Wattage......... 624 Keys ........28 Light bulbs Ignition switch....173, 177 Replacing ......537 Ignition switch....173, 177 Wattage.........
- Page 682 Alphabetical index Maintenance Parking brake ......186 Do-it-yourself maintenance .. 483 Parking lights General maintenance ... 479 Replacing light bulbs .....544 Maintenance data....612 Switch........212 Maintenance requirements... 476 Wattage.........624 Reset the maintenance Personal lights data ........477 Switch........432 Meter Wattage.........624 Instrument panel light Power back door ......56 control ........
- Page 683 Alphabetical index Seat belts Shift lock system ..... 593 Adjusting the seat belt.....82 Shopping bag hooks ....455 Automatic Locking Side airbags ......119 Retractor .......83 Side marker lights Child restraint system Replacing light bulbs..546, 547 installation......146 Switch ........212 Cleaning and maintaining Wattage.........
- Page 684 Alphabetical index Switch Tire information Driving position memory Glossary ........637 switches ....... 73 Size ........633 Emergency flasher switch ..554 Tire identification number..632 Engine switch ....173, 177 Uniform tire quality grading ...635 Fog light switch..... 223 Tires Ignition switch....173, 177 Chains ........278 Intuitive parking assist Checking .......506...
- Page 685 Alphabetical index Vanity lights Warning messages ....578 Vanity lights......446 Washer Wattage.........624 Checking ....... 505 Vanity mirrors......446 Preparing and checking Vehicle identification before winter....... 276 number ........613 Switch ......225, 229 Vehicle stability control...256 Washing and waxing ....470 Voice command system ..426 Weight VSC..........256...
- Page 686 What to do if... What to do if... A tire punctures If you have a flat tire P. 579 P. 109 Engine immobilizer system The engine does not start P. 590 If the engine will not start P. 598 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
- Page 687 What to do if... The warning light or indicator If the warning light turns on or a P. 564 light comes on warning buzzer sounds... Instrument cluster Center display VENZA_OM_OM73023U_(U) I n f o r ma t i o n P r o v i d e d b y :...
- Page 688 What to do if... ■ Warning lights Master warning light Automatic High Beam indicator light P. 568 P. 566 Low engine oil pressure Open door warning light warning light P. 565 P. 567 Charging system Tire pressure warning warning light P.
-
Page 689: Fuel Filler Door P
With filter 6.4 (6.1, 5.4) 4.6 (4.4, 3.9) reference) Without filter 6.0 (5.7, 5.0) 4.2 (4.0, 3.5) “Toyota Genuine Motor Oil” or equivalent Oil grade P. 616 Engine oil type ILSAC GF-5 multigrade engine oil Recommended oil viscosity 0W-20 VENZA_OM_OM73023U_(U)
Need help?
Do you have a question about the 2015 Venza and is the answer not in the manual?
Questions and answers