Menu Items - Samsung 450 Series Installation Manual

¦ Menu Items
To Enter this menu: Press the
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
HD460 / HD47x / HD67x
Menu Item
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Channel
Power On Channel
Num
Power On Channel
Type
Power On Volume
Power On
Power On Volume
Num
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Channel Bank Editor
Mixed Channel Map
Dynamic SI
28
English
→ → → → ENTERE buttons in order.
MUTE 1 1 9
initial Value
Standalone
Select the Hospitality mode.
(Interactive
• Standalone mode: TV works alone, without an SI STB or SBB
for 478/678
• Interactive mode: TV works with an SI STB or SBB
models)
OFF
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
(Samsung
Guestek / Seachange / EBL / MDC / Innvue
for 478/678
• Stand-alone mode : OFF / Smoovie / SSCP
models)
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See
Last Saved Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
... When the TV is turned on, it switches automatically to this channel.
• Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
...
cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
Last Saved
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
... The TV turns on with this Volume Level in Stand Alone Hospitality mode.
0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100 The maximum Volume Level the user in Stand Alone Hospitality mode.
TV Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Last Option
Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired
channel number order.
• Apply the video mute to channels you select. The video mute blanks out the
video from a channel and outputs only the sound while displaying a speaker icon
on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control
the channels guests have access to the channels a guest can access depend on
the Bank Card installed in their SMOOVIE remote.
• ON : Display the cable program channels with air program channels on the chan-
nel list at the same time.
OFF
• OFF : Display the cable program channels or air program channels on the chan-
nel list one time. (can`t display them both at the same time)
• ON : Check the DTV Program channel number. (If Dynamic SI is On, it is not
availale to edit DTV channels in Channel Editor.)
ON
• OFF : Does not check the DTV Program channel number. (If Dynamic SI is Off,
it is available to edit DTV channels in Channel Editor, but additional DTV channel
program number update is not supported.)
Description