Table of Contents
Advertisement
After every use,
1. Allow the unit to completely cool.
2. Remove the cover.
3. Carefully remove the medicine cup and
pour out remaining medication.
4. Empty the water reservoir.
5. Gently wipe the water reservoir and
transfer cone with a soft, lint-free cloth.
Remember, the transfer cone should not
be removed.
6. Follow the cleaning procedures provided
in this guidebook.
Troubleshooting
If any abnormality occurs during use, please
check and correct the following:
Condition
Correction
Unit does not
Check the AC adapter
operate when
connection to the outlet
POWER button and/or check the AC plug
is pressed.
to the unit's AC port.
Make sure that the switch at
the bottom of the unit is in the
"ON" position.
Check that the water
reservoir is filled to the
correct level.
If using the optional battery
pack, check that the battery
is completely charged.
Check that the battery is
mounted correctly to the
unit.
No misting
Check that there is medica-
or low rate
tion in the medicine cup.
of misting
Check the medication cup
for damage.
Check that the transducer is
clean.
Fan is not
Check that the fan is
working
firmly and properly
properly
mounted to the motor shaft.
A flashing red
This is normal (see Using the
light on the
Battery Pack). The flashing
bottom lamp
light indicates proper AC
when the AC
connection and will change to
adapter is
green when the battery is
connected.
fully charged.
The top light
The battery needs to be
changed from
charged. Nebulization will
green to red
decrease and then cease.
during
nebulization.
Replacement Parts
Replacement parts are available through your
local retailer or they can be ordered by mail.
See separate replacement part list for details.
7
Advertisement
Table of Contents
