22. SOFTWARE VERSION
The version, checksum and the port specified by the
microprocessor are displayed. The signal is processed
using EFFECT OFF. The checksum is obtained by adding
the data at every 16 bits for each program area and
expressing the result as a 4-figure hexadecimal data.
* Numeric values in the figure example are for reference.
VER. AOO8
CHECK SUM:1F4A
0:18 D:23 X:A9
PORT:00000100
TI VER.10
TiSUM:41A234F5
EE SUM:0000
PORT:00000100
23. TI (DSP) BOOT
The rewriting mode of TI (DSP) software.
(Not applied to these models.)
Software version of microprocessor /
Checksum value of microprocessor /
Software modules version of microprocessor /
O: Operation
D: DSP
X: XM
The condition of ports for model detection /
Software version of TI (DSP) /
Checksum value of TI (DSP) /
Checksum value of EEPROM /
(Not applied to these models. /
Model type 0
Type3
Model type 1
Model type 2
–
Model type 3
–
23.TI BOOT ?
RX-V459/HTR-5940/DSP-AX459
)
Type2
Type1
Type0
RX-V459
1
1
1
DSP-AX459
HTR-5940
1
1
0
HTR-5935
HTR-5935
Model
37