Part Names - Hitachi FT-01 User Manual

Part names

Adjusting knob
This knob is used to adjust the height and angle of the infrared laser beam.
Laser
injury.
Do not look directly into the laser output port.
Do not point the laser beam towards people.
Do not allow children to use.
FT-01
USB (B-type) mini-connector
This is connected to the option
port of the projector.
Laser output port
This is the window where the infrared
laser beam is output.
Cover
This is a protective cover that is mounted
after installing and adjusting the Finger
Touch Unit.
Laser evaluation standard:
Max. Output : 200mW
Wave Length : 830nm
WARNING
9
A040xx