Preset Memory; Presettuning - Kenwood KDC-X792 Instruction Manual

Preset Memory
Putting the channel in the memory_
1
Select the channel to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select
"P.MEM/~
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob.
S
Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNCl button.
~
~
• Only the channel number is stored. Category information
is not stored.
• This function can be operated with [1] - [6] button.
- Press the desired [1] - [6] button for at least 2 seconds.
Preset Tuning
Recalling the channels in the memory.
1
Enter Preset Tuning Select mode
Turn the Control knob.
A list is displayed.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNCl button.
(§]
• This function can be operated with [1] - [6] button.
- Press the desired [1] - [6] button.
English
I
27