GE AIR C18 Service Manual-Installation page 37

Operating Procedures / Photos
Disassemble Housing
Use screwdriver to screw off the screws around the
housing to remove the cabinet.
(refer to Figure 8-28)
Disassemble Electric Box
Use screwdriver to screw off the screws fixing the
electric box, and pull the electric box to remove it.
(refer to Figure 8-29)
Disassemble Right Side Plate
Use screwdriver to screw off the screws at the right
side plat, condenser side plate, gas valve and liquid
valve, and then pull the right side plate sub-assy
upward to remove it.
Screw
Cabinet
Screw
Electric Box
Communication Ceiling
Type Unit Electric Box
Screw
Screw
Right Side Plate
34
Figure 8-28
Figure 8-29
Figure 8-30