Infrared remote control for rosemount 5081 transmitter (8 pages)
Summary of Contents for Emerson SR600
Page 1
Ceiling Fan/Light Remote Control & Wall Control Owner's Manual For Use With RCK55, RC188 or RC212 Receivers Remote Control Remote Control Model Number: Model Number: SR650 SR600 Wall Control with Switch Covers Model Number: SW605 Part No. F40BP74170000 Form No. BP7417...
WARNING Safety Instructions WARNING: To avoid fire, shock, and serious personal injury, follow all instructions carefully. 1. Read your Owner's Manual carefully before installing the Remote Control or Wall Control. Retain Owner's Manual for future reference. 2. Before servicing or cleaning the ceiling fan, switch power off at service panel and lock service panel to prevent power from being switched on accidentally.
General SR600 REMOTE CONTROL PROCEDURES Your Emerson Ceiling Fan/Light Control may be used with a SR600 or SR650 General Remote Control or a SW605 Wall Control. The remote control or wall control is Your Emerson Ceiling Fan/Light SR600 designed to control your ceiling fan speed, Remote Control consists of hand-held airflow direction, and light intensity.
Installation of Battery Setting Operating Frequency of SR600 1. Remove the battery cover by pressing Remote Control firmly below the arrow and sliding the cover off the control (Figure 1). Your remote control has code switches 2. Install two AAA alkaline batteries and which must be set in one of 32 possible reinstall the battery cover.
Installation of Storage Bracket for SR650 Preset Memory Feature Remote Control Your Emerson receiver is equipped with a preset memory feature. If the AC supply to A storage bracket is provided for holding the receiver is powered through a wall your remote control when not in use.
Page 6
Setting Operating Setting Operating Frequency of SR650 Frequency of SW605 Remote Control Wall Control Your remote control has code switches Your wall control has code switches which which must be set in one of 32 possible must be set in one of 32 possible code code combinations.
Page 7
WALL CONTROL 4. Connect one black wire of wall control LIGHT to the “hot” wire. Securely connect BLACK FAN OFF EMERSON ® wires with wire connectors supplied (Figure 7). 5. Connect one black wire of wall switch NEUTRAL to the “load” (black) wire in wall box.
Page 8
All wiring must be in accordance with FAN/LIGHT LIGHT LIGHT National and Local codes and the ceiling WALL FAN OFF FAN OFF ® EMERSON EMERSON ® fan must be properly grounded as a CONTROL precaution against possible electrical BLACK shock. LOAD...
Page 9
LIGHT LIGHT speed to HIGH ( ..) and turn the light FAN OFF FAN OFF ® EMERSON ® EMERSON ON ( 1. To set the desired fan speed, press the FAN/LIGHT WALL CONTROL...
Trouble Shooting Fan/Light Fails to Operate Short Range • Check that the speed switch on the • If the remote control operates the fan fan is set to HIGH ( ..) speed. when close to it, but does not operate •...
What Will Emerson Electric Co. Do To Correct Problems: Emerson will replace a defective Emerson Remote Control or Wall Control at no charge to you. We will ship the repaired product or replacement to you at no charge, but you are responsible for all costs or removal, reinstallation and shipping of the product to Emerson.
Page 12
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Part No. F40BP74170000 Printed in China 12/09 Form No. BP7417...
Need help?
Do you have a question about the SR600 and is the answer not in the manual?
Questions and answers