Extron electronics AXP 50 C AT User Manual page 24

Install the software as follows:
1. Click the file to launch the installation program.
2. Follow the on-screen instructions. By default, the installation creates a
C:\Program Files\Extron\DSP_Configurator
program.
NOTE: Although USB drivers are not needed for the AXP 50 C AT, during the installation
of DSP Configurator, a USB driver also loads. When the driver installation is completed,
DSP Configurator installation continues.
3.
When the driver installation dialog opens, click
the installation).
Figure 8. USB Installer Splash Screen
4. The USB driver installer launches. When the installer completes the installation of the
USB drivers, the following dialog opens:
Figure 9. Successful USB Driver Installation
5. Click .
Finish
USB driver installation is complete.
folder for the DSP Configurator
to proceed (a status window tracks
Next
AXP 50 C AT • Software Installation 18