Restore Factory Settings; Language - Jura IMPRESSA F8 Instructions For Use Manual

Restore factory settings

Language

T Press the 'Save'
'Saved' appears briefly on the display.
'Machine settings'
O T Press the P button to exit programming mode.
'Please select product'
In the programme item
the machine can be reset to its factory setting: All user settings
(apart from the 'filter' and 'water hardness') are reset to factory set-
tings. Your IMPRESSA then switches off.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the
'Factory setting'
'Factory setting'
tings?'
T Press the
'Yes'
'Saved' appears briefly on the display.
Your IMPRESSA is switched off.
In this programme item you can set the language used by your
IMPRESSA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the 'Choose language'
'Choose language'
E To display more languages, press the
right).
4 Permanent settings in programming mode
button.
'Machine settings'
is displayed.
('1/7')
'Machine settings'
button.
/ 'Reset the machine to the factory set-
button.
is displayed.
('1/7')
'Machine settings'
button.
('4/7') / 'Factory setting'
('4/7') is dis-
'English'
('4/7') is dis-
' > ' button (bottom
33