Ipod/Iphone - Kenwood DDX9902S Instruction Manual

iPod/iPhone

iPod/iPhone
Preparation
Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page 67.
• For playable iPod/iPhone types, see page 73.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
Wired connection
• To listen to music: USB Audio cable for iPod/
iPhone
– For Lightning connector models: Use KCA-iP103
(optional accessory).
– For 30-pin connector models: Use KCA-iP102
(optional accessory).
• To watch video and listen to music: USB Audio
and Video cable for iPod/iPhone
– For Lightning connector models: Use the
HDMI cable KCA-HD100 (optional accessory)
and KCA-iP103 (optional accessory) through a
Lightning-Digital AV adapter (accessory of the
iPod/iPhone).
– For 30-pin connector models: Use KCA-iP202
(optional accessory).
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page 45)
• For Lightning connector models: To watch video,
connect your iPod/iPhone to the HDMI/MHL input
terminal using KCA-HD100 (optional accessory).
(Page 67)
• For 30-pin connector models: You cannot watch
video with a Bluetooth connection.
Selecting the iPod/iPhone device to
play and connection method
When connecting the iPod/iPhone device for
first time, the setup screen (for connection, etc.)
appears. Follow the procedure on the setup screen
to configure the settings.
1
Display the <iPod Settings> screen.
On the <TOP MENU> screen:
• If [Enter] for <iPod Setup> cannot be
selected, put the unit in standby. (Page 7)
2
• If you do not need to change the settings,
press [OK] to exit from the setup screen.
3
Select the connection method (1), then
press [Next] (2).
[USB + AV-IN] Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
[USB 1 Wire] Select this when the iPod/
iPhone is connected using
KCA-iP102 (optional accessory)
or KCA-iP103 (optional
accessory).
[HDMI + Select this when the iPod/
Bluetooth]* iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and
KCA-iP103 (optional accessory)
through a Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
[Bluetooth]* Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting [USB + AV-IN] or [USB 1
Wire], go to step 5.
* When <CarPlay Connection> is set to [ON] (Page 20),
these settings cannot be selected.
Continued on the next page...
ENGLISH 17