FCC Notice
(Digital Camera, Model PC1263 Systems)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be
used with this equipment in order to comply with Class B limits in Subpart
B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications should
be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Reglementation canadienne sur les interferences radio
Cet appareil numerique de la classe Best conforme
a
la norme NMB-003
du Canada.
Need help?
Do you have a question about the PowerShot A590 IS and is the answer not in the manual?
Questions and answers
Keep getting a memory card error. It is seated properly.
To fix a memory card error on a Canon PowerShot A590 IS, try the following steps:
1. Check the Lock Switch – If you see a "memory card is locked" error, move the switch on the memory card to the opposite position.
2. Ensure a Memory Card is Installed – If no memory card is inserted, insert a compatible one.
3. Use the Correct Memory Card Type – If the card is incompatible, replace it with one that works for the camera.
4. Reformat the Memory Card – If the card is not working properly, try reformatting it using the camera’s menu.
If the problem persists after trying these steps, consider using a different memory card.
This answer is automatically generated