4.
Perform the following steps:
a. Remove the screw that secures the battery to the computer [1].
b. Lift and push to remove the battery from the computer [2] [3].
Installing the Battery
1.
Insert the battery into its place on the computer.
2.
Route the battery cable through its routing channel.
3.
Tighten the screw to secure the battery to the computer.
4.
Connect the battery cable to its connector on the system board.
5.
Install the
base
cover.
6.
Follow the procedures in
Removing the Hard-Drive Assembly
1.
Follow the procedure in
2.
Remove the:
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
9
Need help?
Do you have a question about the Latitude E5550 and is the answer not in the manual?
Questions and answers